INSTRUCTION MANUAL
1401 - Footswitch
Thank you for choosing the Lifemax Footswitch - the easy foot control for any mains
appliance. Making those hard to reach sockets a thing of the past.
To get the most out of your Footswitch, please thoroughly read these instructions to
familiarise yourself with all of its operational aspects.
Operating Instructions
Insert the plug section of the Footswitch into any British standard plug socket. Place
the button for the Footswitch in a convenient and accessible place, bearing in mind the
trailing cables which could pose a trip hazard. The Footswitch is supplied with a sticky
pad to allow wall or surface fi xing.
Plug the device you wish to control into the plug socket of the Footswitch. Turn the mains
switch on at the plug. A red LED light at the top of the Footswitch plug will illuminate to
identify power to the Footswitch.
Use the press button on the Footswitch to control power to the device you have plugged
into it. An LED light on the button will illuminate to identify power to the device. To turn
o power to the device, press the button on the Footswitch again. You will notice the red
LED light has gone o identifying the cut of power to the device.
Maintenance and Storage
Your Footswitch may be cleaned using a soft, damp cloth and of necessary, mild detergent.
Do not immerse the unit in water or use alcohol, polish or abrasive liquids or brushes to
clean the unit.
Safety Notes:
1. The unit operates at 230V, 50Hz, 13A. Ensure that the power cord is free from
damage before use.
2. As with any electrical device, keep the unit away from combustible materials
and liquids.
3. There are no user serviceable parts contained within this item - do not remove
the cover.
4. Not for use outside or within a commercial environment.
This product complies with BS5733
Please retain this information for future reference
Lifemax Ltd, 1 Pipers Court, Thatcham,
Berkshire, RG19 4ER, England
www.lifemaxuk.co.uk
Protect our environment: do not dispose of electrical equipment in
your domestic waste. Please return any electrical equipment that
you will no longer use to the collection points provided for their
disposal. These simple steps can help to avoid the potential e ects
that incorrect waste disposal can cause on the environment and
human health. This will contribute to recycling and other forms of re-
use of electrical and electronic equipment. Information concerning
where the equipment can be disposed of can be obtained from
your local authorities.
1401 - Instructions.indd 11401 - Instructions.indd 1 24/09/2014 17:16:3624/09/2014 17:16:36
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Acco Europe Spire Iii Series Laminator User manual
-
TC Electronic Ditto X4 Looper User manual
-
Blackstar ID:60TVP-H Owner's manual
-
Hartke Kilo Amplifier User manual
-
TCHELICON PERFORM-VG Owner's manual
-
TC Electronic FLASHBACK 2 DELAY Owner's manual
-
Behringer FCB1010 User manual
-
Erbe VIO 300 D User manual
-
Mackie MK-MRS10 User manual
-
DigiTech JAMMAN DELAY LOOPER PHRASE SAMPLER Owner's manual
