Potter PAD100-PSDA Addressable Pull Station
This device is a single action pull station manufactured by Potter Electric Signal Company. It is ideal for use in commercial and residential buildings, and can be installed on a single gang box or surface mounted using the P32-BB or P32-DBB (deep) back box. The PAD100-PSDA is compatible with addressable fire systems that utilize the PAD Addressable Protocol.
The Potter PAD100-PSDA Addressable Pull Station is activated by lifting the front cover and then pulling the white "T" bar handle down. The "T" bar cannot be reset without opening the front cover, which will also activate the pull station. To reset the device, use the Potter WS-93 key to unlock and open the front cover. Once the cover is open, push the "T" bar back into the normal position and re-secure the front cover.
Potter PAD100-PSDA Addressable Pull Station
This device is a single action pull station manufactured by Potter Electric Signal Company. It is ideal for use in commercial and residential buildings, and can be installed on a single gang box or surface mounted using the P32-BB or P32-DBB (deep) back box. The PAD100-PSDA is compatible with addressable fire systems that utilize the PAD Addressable Protocol.
The Potter PAD100-PSDA Addressable Pull Station is activated by lifting the front cover and then pulling the white "T" bar handle down. The "T" bar cannot be reset without opening the front cover, which will also activate the pull station. To reset the device, use the Potter WS-93 key to unlock and open the front cover. Once the cover is open, push the "T" bar back into the normal position and re-secure the front cover.
Potter PAD100-PSDA Addressable Pull Station
This device is a single action pull station manufactured by Potter Electric Signal Company. It is ideal for use in commercial and residential buildings, and can be installed on a single gang box or surface mounted using the P32-BB or P32-DBB (deep) back box. The PAD100-PSDA is compatible with addressable fire systems that utilize the PAD Addressable Protocol.
The Potter PAD100-PSDA Addressable Pull Station is activated by lifting the front cover and then pulling the white "T" bar handle down. The "T" bar cannot be reset without opening the front cover, which will also activate the pull station. To reset the device, use the Potter WS-93 key to unlock and open the front cover. Once the cover is open, push the "T" bar back into the normal position and re-secure the front cover.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI