MANUAL SWITCH TRACK
(LEFT AND RIGHT)
78-1016-251
© 1994 Lionel Trains, Inc., Chesterfield, MI 48051-2493
In order to use the inside loop both switches must be
switched simultaneously. The right switch handle must be
moved to the right and the left switch handle must be
moved to the left. There should be a positive click when
the handle has moved the track rails fully to the left or right
switching position.
NOTE: If the above procedure is not done correctly, your
train could derail.
IMPORTANT: Make sure that your train is located in the position indicated by the arrow before
switching the two manual switches.
RIGHT HAND SWITCH LEFT HAND SWITCH
SWITCH HANDLE
Locate train here