2. Dorel Home
  3. 84627

Dorel Home 84627 Assembly Manual

  • Hello! I have reviewed the assembly instructions for the Dorel Home End Table model 84627. This document provides a detailed two-step process for assembling the table, including a parts list and diagrams. I'm ready to answer any questions you might have about the assembly process or components of this end table.
  • What parts are included?
    When should I tighten the bolts?
    What tool is required for assembly?
ITEM NO. 84627 END TABLE
1
2
3
SIDE FRAME
2PCS
TOP CROSSBAR
2PCS
BOTTOM CROSSBAR
2PCS
4
WOOD TOP
1PC
A
B
BOLT 1/4”X1/2”
20PCS
ALLEN KEY
1PC
*** Do not tighten screws & bolts until the entire unit is completely assembled. ***
ASSEMBLY INSTRUCTIONS
STEP 1
*Please put all parts on a soft
surface to prevent scratches.
Attach top crossbars (2) and
bottom crossbars (3) to side
frames (1) by using bolts (A)
as shown.
STEP 2
Attach the assembled metal
frame to wood top (4) by using
bolts (A) as shown.
Tighten all bolts firmly.
Your end table now is
completed.
1
1
3
2
A
3
A
2
A
A
A
A
A
/