KISSLER and CO HD59-3220 Installation guide

Hello! I've reviewed the installation instructions for the Kissler 59-3220 and 759-3220 basket strainers. The guide provides clear, step-by-step instructions on how to install the assembly, use the putty, and check for leaks. I'm ready to answer any questions you have about the installation process or the features of these strainers.
What is the first step in the installation process?

What should be done after inserting the basket strainer assembly?

What tool is needed to tighten the nut fully?

Installation Instructions for

59-3220 and 759-3220

Step 3

Step 1

Step 2

Step 4

Below the sink, place the rubber washer,

then the plastic friction washer into place.

Then screw the strainer nut onto the

assembly and hand-tighten.

Clean the sink opening with a

scrubbing sponge.

Insert the basket strainer assembly into

the hole and press firmly into place.

While holding the assembly and keeping

it from turning, use a strainer nut wrench

to tighten the nut until the flange makes

contact with the sink rim.

Remove the excess Perfect Putty from

the top of the sink and wipe with

scrubbing sponge.

You are now ready to install the tubular drain.

After tubular drain installation, check for leaks.

Step 5

Step 6

Step 7