fantastic furniture SRLLAMTABOOOMTLBLK Assembly Instructions

Instruction manual for FF334 - Sloane Table Lamp Wireless Charging - Black

Safety Installation:

1. Please make sure the lamp is used in the correct way. Always follow these instructions to ensure correct and safe

installation and usage. Keep this instruction manual safe for further reference.

2. Always turn off the power before installing, maintaining or and repairing the lamp.

3. Make sure all the screws are tightened firmly.

4. Regulation states that certain lighting fittings should be installed by a qualified electrician. If any doubt, please inform your

local retailer or qualified electrician for assistant.

5. Do not let any of the lamp parts get ibn contact with any liquid. Do not install the lamps on wet paint.

6. If the external flexible cable or cord is damaged, please contact a qualified electrician to replace it to avoid any hazard.

7. Max. 40W: Only use the suitable bulbs and do not use a globe above the maximum wattage.

8. Electrical wires should never be clamped or twisted between the lighting fitting and mounting surface.

9. For safety installation, please wear gloves for to prevent any injury.

Warning:

1. To maintain the lamp surface, do not use any strong acid or detergent. Please wipe with a dry cloth only.

2. Do not touch the globe when it is on, as it may be hot.

3. Keep away from children and babies to avoid any dangerous accidents, which may happen.

4. Do not use the lamp if any part of the lamp such as the wires, base, or lamp parts are damaged.

5. Do not touch the lamp with wet hands.

Installation and replacement of light bulbs:

1. To reduce the risk of electrical shock, unplug the lamp from the wall socket before changing the bulb.

2. In case of overheating, allow the bulb to cool down before replacing.

3. Be sure that you are using the correct bulb before any replacing.

Applicable voltage & lighting source:

1. Voltage: 220-240V~, 50/60Hz

2. Bulb: E27, Max. 40W

To avoid risk, if any external damage of the wire, please make sure it's replaced by qualified electrician.