LG RNC5 Owner's manual

OWNER’S MANUAL

HIGH POWER

SPEAKER SYSTEM

MODEL

RNC5

www.lg.com

Please read this manual carefully before operating your set and retain it for future

reference.

2301_Rev01

1 Getting Started

Getting Started2

Getting Started

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings should never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

NOTICE: For safety marking information including

product identication and supply ratings, please refer

to the main label on the bottom or the other surface

of the product.

Getting Started 3

Getting Started

1

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case

of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual

to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords,

frayed power cords, or damaged or cracked wire

insulation are dangerous. Any of these conditions

could result in electric shock or re. Periodically

examine the cord of your device, and if its appearance

indicates damage or deterioration, unplug it,

discontinue use of the device, and have the cord

replaced with an exact replacement part by an

authorized service center. Protect the power cord

from physical or mechanical abuse, such as being

twisted, kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall outlets,

and the point where the cord exits the device.

CAUTION: Be careful to make sure children do not

put their hands or any objects into the *speaker duct.

* speaker duct: A hole for plentiful bass sound on

speaker cabinet. (enclosure)

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents4

1 Getting Started

2 Safety Information

6 Unique Features

7 Playable file Requirement

7 – Music file requirement

7 – Compatible USB Devices

7 – USB device requirement

8 Remote control

10 Top panel

12 Front panel / Rear panel

2 Connecting

14 AC Power Cord Connection

15 Optional Equipment Connection

15 – USB Connection

15 – Antenna Connection

3 Operating

16 Basic Operations

16 – USB Operations

17 – Selecting a folder and an MP3/WMA file

18 – Deleting a file/folder or format

19 Playback Effect

19 – AUTO DJ

19 – DJ PAD

20 Using BLUETOOTH® wireless technology

20 – Listening to music stored on the Bluetooth

devices

23 Using the LG XBOOM App

23 – About “LG XBOOM” App

23 – Install “LG XBOOM” App onto Your

Bluetooth Device

24 – Activate Bluetooth with “LG XBOOM” App

25 Radio Operations

25 – Listening to the radio

25 – Improving poor FM reception

25 – Presetting the Radio Stations

25 – Deleting all the saved stations

26 – Seeing information about a Radio station

26 – Listening to the DAB+

26 – DAB+ scan

27 Sound adjustment

27 – Setting the sound mode

27 – Setting the USER EQ

28 Advanced Operations

28 – Recording to USB

30 – JUKEBOX Playback

31 Other Operations

Table of Contents

Table of Contents 5

1

2

3

4

5

31 – Turn off the sound temporarily

31 – CHILDSAFE Mode

31 – DEMO

32 – Using Guitar

32 – Using Microphone

35 – LIGHTING

35 – Sleep Timer Setting

35 – Dimmer

36 – Auto power down

36 – AUTO POWER On

37 – Auto function change

38 Setting the Clock

38 – Setting the Clock through “LG XBOOM” App

38 – Using your unit as an alarm clock

39 LG Sound Sync

40 WIRELESS PARTY LINK Connection

4 Troubleshooting

41 Troubleshooting

41 – General

42 – NOTES to release Demo mode

5 Appendix

43 General specifications

44 Trademarks and licenses

45 Maintenance

45 – Handling the Unit

Getting Started6

Getting Started

1

Unique Features

BLUETOOTH®

Listens to music stored on your Bluetooth device.

Playback effects

Listens to music with various sound and playback

effects.

USB Direct Recording

Records music to your USB device.

LG XBOOM

LG XBOOM is an app designed to let you take

control of some of LG’s latest audio devices. (Page

23-24)

LG Sound Sync

Controls volume level of this unit by the remote

control of your LG TV that is compatible with LG

Sound Sync.

Getting Started 7

Getting Started

1

Playable file

Requirement

Music file requirement

MP3/WMA le compatibility with this unit is limited

as follows.

ySampling frequency: within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

yBit rate: within 32 to 320 kbps (MP3),

40 to 192 kbps (WMA)

yMaximum les: 2,000

yMaximum folders: 200

yFile extensions: “.mp3”/ “.wma”

yCertain MP3/WMA les may not be played

depending on the type or format of the le.

Compatible USB Devices

yMP3 Player: Flash type MP3 player.

yUSB Flash Drive:

Devices that support USB2.0 or USB1.1.

yThe USB function of this unit does not support all

USB devices.

USB device requirement

yDevices which require additional program

installation when you have connected it to a

computer, are not supported.

yDo not extract the USB device while in operation.

yFor a large capacity USB, it may take longer than a

few minute to be searched.

yTo prevent data loss, back up all data.

yIf you use a USB extension cable or USB hub, the

USB device is not recognized.

yUsing NTFS le system is not supported. (Only

FAT(16/ 32) le system is supported.)

yThis unit recognizes up to 2,000 les.

yExternal HDD, Card readers, Locked devices, or

hard type USB devices are not supported.

yUSB port of the unit cannot be connected to PC.

The unit cannot be used as a storage device.

ySome USB may not work with this unit.

Getting Started8

Getting Started

1

Remote control

Replacement of battery

(R03)

Remove the battery cover on the rear of the remote

control, and insert the battery with 4 and 5

matched correctly.

Risk of re or explosion if the battery is replaced by

an incorrect type.

• • • • • • • • • • • • • • a • • • • • • • • • • • • •

1 (Standby): Turns the power on or off.

LIGHTING: Selects the lighting mode.

VOL (Volume) +/-: Adjusts speaker volume.

F (Function): Selects the function and input source.

Input source / Function Display

USB USB1 / USB2

Bluetooth BT

LG Sound Sync (Wireless) LG TV

Radio FM

DAB+ DAB+

[ (Mute): Mutes the sound.

PRESET·FOLDER W/S:

- Chooses a preset number for a radio station.

(Page 25)

- Searches for a folder of MP3/WMA les. When a

USB containing MP3/WMA les in several folders

is being played, press PRESET·FOLDER W/S to

select the folder you want to play.

JUKEBOX/MEMORY:

- Stores radio stations. (Page 25)

- Selects JUKEBOX mode. (Page 30)

- Makes JUKEBOX list.

AUTO DJ: Selects the AUTO DJ mode. (Page 19)

DELETE:

- Deletes MP3/WMA les. (USB only). (Page 18)

- Deletes a song on the JUKEBOX list.

- Deletes all the saved stations.

Getting Started 9

Getting Started

1

• • • • • • • • • • • • • • b • • • • • • • • • • • • •

REPEAT: Listens to your les repeatedly or randomly.

TUNING-/+:

- Selects the radio stations.

- Scans DAB+ stations by pressing and holding.

C/V (Skip/Search):

- Skips backward or forward.

- Searches for a section within a le.

N (Play/Pause):

- Starts or pauses playback.

- Selects stereo/mono.

-Bluetooth connection lock (BT LOCK): Select the

Bluetooth function by pressing F repeatedly. And

long press N to limit Bluetooth connection to

only BT and LG TV.

BASS BLAST (or BASS BLAST+): Selects BASS (or

BASS+) effect directly.

EQ: Chooses sound impressions.

SPECIAL EQ: Chooses special equalizer.

J (Information):

- Sees information about your music. An MP3 le

often come with ID3 tag. The tag gives the Title,

Artist, Album or Time information.

- Sees Bluetooth device name of the unit in BT

READY.

- Sees the name of connected all Bluetooth device

in Bluetooth mode.

- When these units are successfully connected each

other in WIRELESS PARTY LINK mode, each of

connected device names appears in the each unit.

• • • • • • • • • • • • • • c • • • • • • • • • • • • •

0 to 9 numerical buttons: Selects numbered les or

preset number.

CLOCK: Sets a clock and checks a time.

ALARM: With the ALARM function you can turn on

USB play and tuner reception at a desired time.

• • • • • • • • • • • • • • d • • • • • • • • • • • • •

VOICE CANCELLER: You can reduce the vocal tones

during music playback from various input sources.

SLEEP: Sets the system to turn off automatically at

a specified time.

(Dimmer: The display window will be darkened by

half.)

DAB+ MODE :

- DAB+ radio type

- Selects a DAB+ display mode.

RDS/SET :

- RDS (Radio Data System)

- Conrms the setting.

KEY CHANGER (L/l): Changes the key to suit your

vocal range.

MIC (Microphone) ECHO: Selects ECHO mode.

PTY : Searches radio stations by radio type. (RDS

only)

VOCAL EFFECTS: Selects various vocal effects

mode.

USB REC:

- Records to USB.

- Stops recording.

Getting Started10

Getting Started

1

Top panel

h

olk

f

g

i

j

a

b

cde

m

n

a 1 (Standby)

Turns the power on or off.

b USB REC / DEMO

- Records to USB.

- Stops recording.

- In power off status, if you press USB REC /

DEMO, show demo mode.

c USB 1 Port

You can play sound les by connecting the USB

device.

d Display window

e USB 2 Port

You can play sound les by connecting the USB

device.

f F (Function)

Selects the function and input source.

Input source / Function Display

USB USB1 / USB2

Bluetooth BT

LG Sound Sync (Wireless) LG TV

Radio FM

DAB+ DAB+

Getting Started 11

Getting Started

1

g LIGHTING

Selects the lighting mode.

h 3TWIN

Connects two units for TWIN mode in WIRELESS

PARTY LINK.

i C/V (Skip/Search)

- Skips backward or forward.

- Searches for a section within a file.

- Selects the radio stations.

- Scans DAB+ stations by pressing and holding.

N (Play/Pause)

- Starts or pauses playback.

- Selects stereo/mono.

- Bluetooth connection lock (BT LOCK):

Select the Bluetooth function by pressing

F repeatedly. And long press N to limit

Bluetooth connection to only BT and LG TV.

AUTO DJ / RDS

- Selects the AUTO DJ mode.

- Radio Data System

VOL (Volume) -/+

Adjusts speaker volume.

MIC (Microphone) / GUITAR -/+

Adjusts Microphone volume or Guitar volume.

j (Auto Music Play)

Plays the audio currently playing by tagging the

mobile (with “LG XBOOM” App) to this unit.

(Android Only)

k VOICE CANCELLER

You can reduce the vocal tones during music

playback from various input sources.

EQ

Chooses sound impressions.

l CLUB, DRUM, USER (DJ PAD)

Selects CLUB, DRUM or USER sound effect to

mix.

(If you want to use USER, you have to register a

source with “LG XBOOM” app.(Android Only))

1, 2, 3 (DJ PAD)

Press a desired sound pad.

m MIC (Microphone) ECHO

Selects ECHO mode.

VOCAL EFFECTS

Selects various vocal effects mode.

KEY CHANGER (l/L)

Changes the key to suit your vocal range.

n Remote sensor

o SPECIAL EQ / BASS BLAST (or BASS BLAST+)

- Chooses special equalizer.

- Press and hold to select BASS (or BASS+)

effect directly.

SEARCH

Moves to folder or file in selection mode.

OK

Selects a folder when searching a file.

USER EQ

Selects the equalizer created by your own.

Multi jog

- Searches a folder or a file.

- Turns clockwise or counterclockwise to control

the USER EQ level.

- Chooses special equalizer.

Getting Started12

Getting Started

1

Front panel / Rear panel

a Lighting

b Remote sensor

Place the unit at a safe distance from the

child’s reach. Otherwise it may result in the unit

falling down and causing personal injury and/or

property damage.

> Caution

c GUITAR IN: Connect a guitar.

d MIC (Microphone) IN: Connect a microphone.

e DAB+/FM ANTENNA

f AC IN socket

yConnect the power cord to wall outlet

directly if possible. Or when you use an

extension cable, it is highly recommended

to use an extension cable of 110 V / 15 A

or 230 V / 15 A, otherwise the unit may

not operate properly because of the lack of

power supply.

yDo not overload the extension cord with

excessive electrical load.

> Caution

ec d

f

a

b

Getting Started 13

Getting Started

1

Useful functions for using the unit

Function Description To do Do this

BT Lock On/Off

(Page 22)

It allows you to connect a

Bluetooth device only on

BT (Bluetooth) and LG TV

functions.

Initial setting of this function

was set to off.

ON Press and hold N for 5 seconds in BT

(Bluetooth) function.

OFF Press and hold N for 5 seconds in BT

(Bluetooth) function.

Auto Power On

(Page 36)

It allows the unit to turn on

automatically by input signals:

LG TV or

BT (Bluetooth)

ON Turn off the unit by pressing 1 on the unit

for 5 seconds.

OFF Turn off the unit by pressing 1 on the unit

for 5 seconds.

2 Connecting

Connecting14

Connecting

2

AC Power Cord

Connection

1. Connect one end of the AC power cord (included)

to the AC IN socket.

2. Plug the other end into the wall outlet.

Unplug the AC power cord from the wall outlet

if you do not use for an extended period of time.

, Note

Connecting 15

Connecting

2

Optional Equipment

Connection

USB Connection

Connect a USB device (or MP3 player, etc.) to the

USB ports on the unit.

USB device

Removing the USB device from the unit:

1. Choose a different function/mode.

2. Remove the USB device from the unit.

, Note

Antenna Connection

Connect the supplied antenna for listening to the

radio.

Antenna

yBe sure to fully extend the antenna.

yWhen moving the unit to other areas : Delete

all of the saved DAB+ scanned stations.

, Note

3 Operating

Operating16

Operating

3

Basic Operations

USB Operations

1. Connect the USB device to the USB port.

2. Select USB function by pressing F.

To Do this

Playback Press N.

Pause Press N during playback.

Searching for a

section within

a le

Press and hold C/V during

playback and release it at the point

you want to listen to.

Selecting a le

directly

Press 0 to 9 numerical buttons on

the remote control to go to the

desired le directly.

Skipping to

the next/

previous le

(1) By using C/V buttons:

Press V to go to the next le.

Playing in less than 3 seconds, press

C to go to the previous le.

Playing after 3 seconds, press C to

go to the beginning of the le.

(2) By using SEARCH:

Rotate Multi jog or C/V and

press N to play the le.

Playing

repeatedly or

randomly

Press REPEAT on the remote

control repeatedly. Refer to the note

for details about the display change.

yRepeat/Shufe playback operates as follows.

On Display

Description

OFF Plays songs in order, and stops

the playback.

ONE Plays a same song repeatedly.

FOLDER Plays songs in a folder

repeatedly.

ALL Plays all the songs repeatedly.

SHUFFLE

Plays all the songs once

randomly, and stops the

playback.

yWhen you play JUKEBOX list, only ONE and

ALL are available.

yEven after restarting the unit or switching

one function to another, you can listen to

music from the point where it’s last been

played.

, Note

Operating 17

Operating

3

Selecting a folder and

an MP3/WMA file

On the unit

1. Press SEARCH and rotate Multi Jog or C/V

until a desired file appears. You can also search a

folder if you press SEARCH again.

2. Press OK or N to play the selected file. When

you search a folder, press OK to select a file in the

folder, then press OK or N again. The selected

file is played.

On the remote control

1. Press PRESET·FOLDER W/S repeatedly until a

desired folder appears.

2. Select the file you want by using C/V.

3. Press N to play it.

yUSB Folders/Files are recognized as below.

yIf there is no le in a folder, the folder will not

appear.

yFolders will be presented as the following

order;

ROOT FOLDER 1 FOLDER 3

FOLDER 7 FOLDER 8 FOLDER 5

FOLDER 6

yFile will be played from $ le No.1 to $ le

No.14 one by one.

yFiles and folders will be presented in order

recorded and may be presented differently

according to the record circumstances.

*ROOT: The rst screen you can see when a

computer recognize the USB is “ROOT”.

, Note

Operating18

Operating

3

Deleting a file/folder or format

You can delete le, folder on your USB or format the

USB.

1. Select USB function by pressing F.

2. Press DELETE on the remote control repeatedly,

the display changes as followings.

DEL FILE DEL DIR FORMAT

On Display Description

DEL FILE Select the le you want to delete.

DEL DIR Select the folder you want to

delete.

FORMAT Select to format the USB device.

If you want to exit the current mode, press

DELETE on the remote control repeatedly until

“FORMAT” appears, and then press DELETE on

the remote control once again.

3. To delete file/folder or format, press and hold

DELETE on the remote control.

yDo not extract the USB device during

operation. (play, delete, etc.)

yRegular back up is recommended to prevent

data loss.

yThe delete function may not be supported

according to the USB status. (lock, etc.)

> Caution

Operating 19

Operating

3

Playback Effect

The unit supports various sound and playback

effects: AUTO DJ, DJ PAD.

AUTO DJ

Auto DJ blends the end of one song into the

beginning of another for seamless playback. It

equalizes volume across les for uninterrupted

playback.

Press AUTO DJ repeatedly, the display changes as

followings.

SHUFFLE SEQUENTIAL OFF

On Display Description

OFF -

SHUFFLE The music is played randomly on

this mode.

SEQUENTIAL The music is played repeatedly on

this mode.

yAUTO DJ mode does not support searching

for a section within a le or to play repeatedly

or randomly.

yIf you move to other functions on AUTO DJ

mode, AUTO DJ will be disabled.

yAUTO DJ is not supported in the music le

whose length is less than 60 seconds.

yOnly SEQUENTIAL is selected when played

JUKEBOX list.

, Note

DJ PAD

It allows you to mix CLUB, DRUM or USER sound

effect. Each mode has up to 3 sounds effect.

1. Press and hold DJ PAD (CLUB, DRUM or USER)

on the unit to select a desired DJ PAD sound

effect.

2. Press a DJ PAD (1, 2, 3) of desired sound on the

unit.

yIf you want to use USER, you have to register

a source with “LG XBOOM” app.(Android

Only)

If the source is not register to USER, “EMPTY”

or “NO SOUND” appears on the display

window.

yInitial DJ PAD mode is CLUB sound effect.

yDJ PAD mode is displayed for 3 seconds

when you press DJ PAD (CLUB, DRUM or

USER) on the unit.

yThe DJ PAD sound is mixed when you press a

DJ PAD (1, 2, 3) on the unit.

yThe currently playing DJ PAD sound is

stopped and the selected DJ PAD sound

outputs if you press a different DJ PAD (1, 2,

3) on the unit while DJ PAD sound is playing.

, Note

Operating20

Operating

3

Using BLUETOOTH®

wireless technology

About Bluetooth

Bluetooth is wireless communication technology for

short range connection.

The sound may be interrupted when the connection

interfered by the other electronic wave or you

connect the Bluetooth in the other rooms.

Connecting individual devices under Bluetooth

wireless technology does not incur any charges.

A mobile phone with Bluetooth wireless technology

can be operated via the Cascade if the connection

was made via Bluetooth wireless technology.

yAvailable Devices: Smart phone, MP3, Notebook,

etc.

yVersion: 4.0

yCodec: SBC, AAC

Bluetooth Profiles

In order to use Bluetooth wireless technology,

devices must be able to interpret certain proles.

This unit is compatible with following prole.

A2DP (Advanced Audio Distribution Prole)

Listening to music stored on the

Bluetooth devices

Pairing your unit and Bluetooth device

Before you start the pairing procedure, make

sure the Bluetooth feature is activated on your

Bluetooth device. Refer to your Bluetooth device’s

user guide. Once a pairing operation is performed, it

does not need to be performed again.

1. Turn on the unit.

When Bluetooth connection lock is activated,

you can search Bluetooth device in BT function.

, Note

2. Operate the Bluetooth device and perform the

pairing operation. When searching for this unit

with the Bluetooth device, a list of the devices

found may appear in the Bluetooth device display

depending on the type of Bluetooth device. Your

unit appears as “LG RNC5 (XX)”.

yXX means the last two digits of

Bluetooth address. For example, if your

unit has a Bluetooth address such as

9C:02:98:4A:F7:08, you will see

“LG RNC5 (08)” on your Bluetooth device.

yDepending on the Bluetooth device type,

some devices have a different pairing way. For

details about Bluetooth pairing, refer to your

Bluetooth device manual.

yYou can connect this unit with up to 3

Bluetooth devices simultaneously using the

same method as described above, only in the

Bluetooth function.

yThe multi phone pairing connection is only

supported on Android devices. (Multi phone

pairing connection may not be supported

depending on the connected device

specications.)

yRemovable/detachable Bluetooth devices

(Ex: Dongle etc.) will not support multi phone

pairing.

, Note

Page is loading ...

LG RNC5 Owner's manual

LG RNC5 Owner's manual

Related papers

Other documents