2. Dorel Home
  3. 40222

Dorel Home 40222 Assembly Manual

  • Hello! I have reviewed the user manual for the 40222 lamp. This document includes assembly instructions and safety guidelines, using components like the harp, knurl nut, and finial. A 40-watt E26 bulb is needed but not supplied. I'm here to answer any questions you might have about the lamp or its assembly process.
  • What type of bulb does the lamp use?
    Is the bulb supplied with the lamp?
    What should I do if the plug does not fit into the outlet?
01 02
Shade Size
Top
Bottom
Height
11"*11"
13"*13"
13"
Finial
Shade
Knurl Nut
Harp
Lamp body
Assembly
Saddle
Item#: 40222
W6.6" H20.1" L6.5"
Lamp Assembly Instructions
Please read all instructions carefully. Before you proceed
to install, make sure that the power supply is turned off
and off until installation is complete. Please note that
each part has been assigned a letter. Please proceed in
alphabetical order.
ASSEMBLY INSTRUCTIONS:
1. Place the Lamp body Assembly on a level surface.
2. Insert the harp until it sits firmly in the saddle.
3. Adjust the knurl nut on the harp. This can be used to
raise the shade if necessary.
4. Place the shade onto the top of the harp and tighten
with the finial securing the shade in place.
FOR RETURN SHIPPING PURPOSES: PLEASE RETAIN ORIGINAL
PACKAGING TO MINIMIZE DAMAGE
Uses 40 WATT E26 Bulb
(Bulb not supplied)
Listed
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE*.
Made in China
C
UL
UL
"
"
R
R
40222
Lamp Assembly Instructions
Important Safety Instructions
This portable lamp has a polarized plug (one blade is
wider than the other) as a safely feature to reduce the risk
of electric stock. This plug will fit in a polarized outlet
only one way. If it dose not fit ,contact a qualified
electrician. Never use with an extension cord unless the
plug can be fully inserted.
W H L6.5"6.6" 20.1"
/