Virtu USA VTU-3567 User manual

Category
Cleaning media
Type
User manual

This manual is also suitable for

VIRTU USA
Serenity Collection
CLEANING GUIDE
All VIRTU USA products are manufactured with non-porous materials that helps mini-
mize grime and calcium deposits. We recommend users wipe to remove any surface
dirt with a soft cloth after each use. A mild abrasive product, such as Mr. Clean, may
be used for standard cleaning.
Petroleum based products such as paint thinners or other solvents should never be
used, as they may damage the surface. Do not use abrasive cleanser products. For
more dif cult stains, use a mildly abrasive cleanser such as Soft Scrub, Comet Soft
Cleanser or similar products.
To repair a scratched or damaged product, automotive sanding and buf ng tech-
niques may be used. Begin with a lower grit sand paper, 600 grit, followed with 800
grit, and nally nished in 1200 grit. Lower grit sand paper is more course, and high
grit sand paper is more ne. Finish the product by polishing the surface using a soft
cloth and automotive polishing compound. Please contact VIRTU USA for extensive
repair questions and recommendations. Be prepared to send picture photos of the
damaged area.
CLEANING GUIDE
www.VirtuUSA.com
7471 Doig Dr., Garden Grove, CA 92841
Tel. 714-892-6804 Fax. 714-892-6809
  • Page 1 1

Virtu USA VTU-3567 User manual

Category
Cleaning media
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI