Graco 406827A, Remote Air Valve Conversion Kits, Husky 1050 User manual
- Category
- Kitchen & houseware accessories
- Type
- User manual
This manual is also suitable for
GENUINE GRACO PARTS AND ACCESSORIES
Remote Air Valve
Conversion Kits
Husky
®
1050 Diaphragm Pumps
406827A
ENG
Kit 24D037, Aluminum
Kit 24D038, Polypropylene
Kit 24D039, Conductive Polypropylene
1. Remove pilot valves. Cartridges should remain in
place. If removed, grease and reinstall the pilot valve
cartridges (C) and o-rings. Screw in until seated.
2. Grease and install new pilot valve inserts (105).
Torque to 20-25 in.-lb (2.3-2.8 N•m). Do not
over-torque.
3. Remove air valve and gasket.
4. Align the new air valve gasket (101) on the center
housing, then attach the new air valve (104). See
Torque Instructions in the manual.
Important Safety Instructions
Read all warnings and instructions in the Husky
®
1050 Air-Operated Diaphragm Pump
Repair/Parts manual. Save all instructions.
Ref. Description Qty.
101 GASKET, air valve 1
102 SCREW, M6 x 25, Kit 24D037
(for use with metal housings)
4
103 NUT, Kits 24D038 and 24D039
(for use with plastic housings)
4
104 AIR VALVE, with restrictor 1
105 INSERT, remote pilot 2
Apply lithium-based grease.
1
Torque to 20-25 in.-lb
(2.3-2.8 N•m).
2
102
103
2
ti14718a
1
105
ti14719a
101
104
105
2
1
101
104
Torque in a crisscross
pattern to 80 in-lb (9.0 N•m).
3
Torque in a crisscross
pattern to 55 in-lb (6.2 N•m).
4
3
4
Metal Housings
Plastic Housings
C
C
Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
406827 Rev. A 09/2009
Copyright 2009, Graco Inc. is registered to ISO 9001
-
1
Graco 406827A, Remote Air Valve Conversion Kits, Husky 1050 User manual
- Category
- Kitchen & houseware accessories
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Graco 406829C Owner's manual
-
-
-
-
-
-
-
-
-