Runco CX-52HD User manual

OWNER’S OPERATING MANUAL

CX-52HD

CX-57HD

1080p High-Definition LCD Flat Panel Displays

with

Runco CX-52HD/CX-57HD Owner’s Operating Manual iii

PRE

L

IMINAR

Y

ONE YEAR LIMITED WARRANTY

For LCD Displays

Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces

“The World’s Finest Home Theater Products.” With proper installation, setup and care, you should enjoy many years of

unparalleled video performance.

This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your

other important documents.

SERVICE LABOR: Runco will pay for service labor by a Runco Authorized Service Center when needed as a result of a

manufacturing defect for a period of one (1) year from the effective date of delivery to the end user.

PARTS: Runco will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship

for a period of one (1) year from the effective date of delivery to the end user. Such replacement parts are then subsequently

warranted for the remaining portion (if any) of the original warranty period.

Image retention on LCD display panels is specifically excluded from coverage under this Limited Warranty. Image retention or

staining of an image is the result of misuse of the product and therefore cannot be repaired under the terms of this Limited

Warranty.

Normal viewing material such as television/satellite broadcasts, videotape or DVDs (not put into pause for extended periods of

time) will not cause damage to your display under normal conditions. Many DVD players are also equipped with screen savers

for this reason.

TO AVOID IMAGE RETENTION (Burn-in): Please ensure that still images are not left on your LCD display panel. Also

ensure that images displayed in the 4:3 aspect ratio mode (black or gray stripes, but no picture information is present on the

left and right edges of the screen) are used as infrequently as possible. This will prevent permanent retention on your LCD

display panel, which can be seen permanently under certain conditions once burn-in has occurred.

The types of images to avoid include video games, still images and computer screens with stationary tool bars and icons. (This

is why computers are equipped with screen savers – to prevent still images from burning into the monitor’s phosphors after

being displayed continuously for an extended period of time).

This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does

not cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from

accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper

maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and

brownouts; damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote

control units, damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this

Limited Warranty.

CAUTION: THIS LIMITED WARRANTY ONLY COVERS RUNCO PRODUCTS PURCHASED FROM RUNCO AUTHORIZED

DEALERS. ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED

WARRANTY. MOREOVER, DAMAGE RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP

IS SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY. IT IS IMPERATIVE THAT

INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN AUTHORIZED RUNCO DEALER TO PROTECT YOUR

RIGHTS UNDER THIS WARRANTY. THIS WILL ALSO ENSURE THAT YOU ENJOY THE FINE PERFORMANCE OF WHICH

YOUR RUNCO PRODUCT IS CAPABLE WHEN INSTALLED AND CALIBRATED BY RUNCO AUTHORIZED PERSONNEL.

WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

iv Runco CX-52HD/CX-57HD Owner’s Operating Manual

PRE

L

IMINAR

Y

Runco limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There

are no express warranties. Runco also excludes any obligation on its part for incidental or consequential damages related to

the failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and

some states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or

exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from

state to state.

This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as

evidence of the purchase date.

Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we

should discover a safety problem or product update for which you must be notified.

Repairs made under the terms of this Limited Warranty covering your Runco video product will be performed at the location of

the product, during usual working hours, providing location of product is within normal operating distance from a Runco

Authorized Service Center. In some instances it may be necessary for the product to be returned to the Runco factory for

repairs. If, solely in Runco’s judgment, location of product to be repaired is beyond normal operating distance of the closest

Runco Authorized Service Center, or the repair requires the unit be returned to the Runco factory, it is the owner’s

responsibility to arrange for shipment of the product for repair. These arrangements must be made through the selling Runco

Dealer. If this is not possible, contact Runco directly for a Return Authorization number and shipping instructions. Runco will

return product transportation prepaid in the United States, unless no product defect is discovered. In that instance, shipping

costs will be the responsibility of the owner.

other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any mechanical,

electronic or other means, in any form, without prior written permission of the manufacturer.

Reflection, Enhanced GEN3, DHD, Vivix, Virtual Cinema, CineWide, AutoScope, O-Path, CinOptx, LiveLink, CSMS, SuperOnyx

and VirtualWide are trademarks of Runco International. All other trademarks and registered trademarks used in this document

are the property of their respective owners.

Runco International products are manufactured under one or more of the following patents: US. Patent 6755540 and Other

Patents Pending.

RIGHTS, LIMITS AND EXCLUSIONS:

EFFECTIVE WARRANTY DATE:

IMPORTANT – WARRANTY REGISTRATION:

CONTACT A RUNCO AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:

COPYRIGHT AND TRADEMARKS:

Runco CX-52HD/CX-57HD Owner’s Operating Manual v

PRE

L

IMINAR

Y

To locate the name and address of the nearest Runco Authorized Service Center, or for additional information about this

Limited Warranty, please call or write:

RUNCO INTERNATIONAL, INC.

Attn: Customer Service Department

2900 Faber Street

Union City, CA 94587

Ph: (510) 324-7777

Fax: (510) 324-9300

Toll Free: (800) 23-RUNCO

RUNCO VIDEO-PRODUCT INFORMATION

RETAIN THIS INFORMATION FOR YOUR RECORDS

_________________________________________________________ ________________________________________

Model Purchased Date

____________________________________________________________________________________________________________

Serial Number

____________________________________________________________________________________________________________

Runco Authorized Dealer Name

____________________________________________________________________________________________________________

Address

____________________________________________ __________________ ________________________

City State/Province Postal Code

____________________________________________ _______________________________________________________

Phone Fax

ADDITIONAL INFORMATION:

vi Runco CX-52HD/CX-57HD Owner’s Operating Manual

PRE

L

IMINAR

Y

Thank you for your purchase of this quality Runco product! For best performance, please read this manual carefully as it is your

guide through the menus and operation.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is

provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of

the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point

where they exit from the apparatus.

11. Only use the attachments/accessories specified by Runco.

12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in

any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Important Safety Instructions

WARNING

This symbol is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s enclosure

that may be of sufficient magnitude to constitute a risk of electric

shock.

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Runco CX-52HD/CX-57HD Owner’s Operating Manual vii

PRE

L

IMINAR

Y

Manufacturer’s Name: Runco International, a subsidiary of Planar Systems, Inc.

Manufacturer’s Address: 2900 Faber Street, Union City, CA 94587

hereby declares that the products Model Numbers:

CX-52HD, CX-57HD

conform with the provisions of:

Council Directive 2004/108/EC on Electromagnetic Compatibility;

EN 55022 “Limits and methods of measurements of radio interference characteristics of information technology equipment”

1998;

EN 55024 “Limits and methods of measurements of immunity characteristics of information technology equipment” 1998;

Including:

• EN 61000-4-2 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 2:

Electrostatic discharge immunity test”

• EN 61000-4-3 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 3: Radiated,

Radio-Frequency, Electromagnetic Field Immunity Test”

• EN 61000-4-4 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 4: Electrical

fast transient/burst immunity test”

• EN 61000-4-5 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 5: Surge

immunity test"

• EN 61000-4-6 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 6: Conducted

disturbances induced by radio-frequency fields immunity test"

• EN 61000-4-8 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 8: Conducted

disturbances induced by power frequency magnetic fields immunity test"

• EN 61000-4-11 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 11: Voltage

dips, short interruptions and voltage variations immunity tests"

And:

• EN 61000-3-2 "Electromagnetic compatibility (EMC) Part 3, Section 2: Limits for harmonic current emissions (equipment

input current up to and including 16 A per phase)" 2000;

• EN 61000-3-3 "Electromagnetic compatibility (EMC) Part 3, Section 3: Limitations of voltage changes, voltage

fluctuations and flicker in public low-voltage supply systems, for equipment with rated current up to and including 16 A

and not subject to conditional connection" 1995;

Council Directive 2006/95/EC and amended by M1 and C1 on Low Voltage Equipment Safety;

EN 60950 “Safety of information technology equipment, including electrical business equipment”

The Technical Construction file required by this Directive is maintained at the corporate headquarters of Planar Systems, Inc.,

1195 NW Compton Drive, Beaverton, OR 97006.

Date of Declaration: October 2007

Compliance Information

DECLARATION OF CONFORMITY:

viii Runco CX-52HD/CX-57HD Owner’s Operating Manual

PRE

L

IMINAR

Y

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be

hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws.

For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG.

For lamp specific disposal information check WWW.LAMPRECYCLE.ORG.

This symbol found on your product or on its packaging, indicates that this product should not be treated as

household waste when you wish to dispose of it. Instead, it should be handed over to an applicable collection

point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,

you will help prevent potential negative consequences to the environment and human health, which could

otherwise be caused by inappropriate disposal of this product. The recycling of materials will help to conserve

natural resources. This symbol is only valid in the European Union. If you wish to discard this product, please

contact your local authorities or dealer and ask for the correct method of disposal.

FCC PART 15:

INDUSTRY CANADA (ICES-003):

IMPORTANT RECYCLE INSTRUCTIONS

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT (Applicable throughout the European

Union and other European countries with separate collection programs)

Runco CX-52HD/CX-57HD Owner’s Operating Manual ix

1Table of Contents

PRE

L

IMINAR

Y

ONE YEAR LIMITED WARRANTY .................................................................................. iii

Important Safety Instructions ........................................................................................ vi

Compliance Information ............................................................................................... vii

1. Introduction ...............................................................................................................1

About This Manual .......................................................................................................1

Target Audience .....................................................................................................1

If You Have Comments About This Manual... ..........................................................1

Textual and Graphic Conventions ...........................................................................1

Using This Manual ........................................................................................................2

Description, Features and Benefits ...............................................................................3

Key Features and Benefits ......................................................................................3

Parts List ...............................................................................................................4

2. Controls and Functions ............................................................................................5

Crystal Series LCD at a Glance ....................................................................................5

Controls and Indicators...........................................................................................5

Crystal Series LCD Inputs and Outputs...................................................................6

Crystal Series LCD Remote Control ..............................................................................9

3. Installation ...............................................................................................................13

Remote Control ..........................................................................................................13

Battery Installation ................................................................................................13

Notes on Remote Control Operation.....................................................................13

Quick Setup ...............................................................................................................14

Installation Considerations ..........................................................................................15

Wall-Mounting the Crystal Series LCD ..................................................................15

Ambient Light .......................................................................................................15

Other Considerations ............................................................................................15

Connections to the Crystal Series LCD .......................................................................16

Connecting the Crystal Series LCD to Source Components..................................16

AV OUT Connection .............................................................................................20

Connecting Headphones ......................................................................................20

Connecting External Speakers (Optional) ..............................................................21

Connecting to a Dolby Digital Amplifier..................................................................21

RS-232 Controller Connection ..............................................................................22

Table of Contents

x Runco CX-52HD/CX-57HD Owner’s Operating Manual

PRE

L

IMINAR

Y

4. Operation .................................................................................................................23

Turning on the Power .................................................................................................23

Changing the OSD Language .....................................................................................23

Setting the PC Display Properties ...............................................................................24

Using the On-Screen Menus ......................................................................................25

Main Menu ...........................................................................................................27

Source .................................................................................................................27

Aspect Ratio ........................................................................................................27

Picture Adjust .......................................................................................................29

Audio ...................................................................................................................33

Channel (CX-52HD only) ......................................................................................34

Timer (CX-52HD only) ..........................................................................................35

Setup....................................................................................................................36

ISF Calibration .....................................................................................................40

Using Picture-In-Picture (PIP) .....................................................................................43

Changing the PIP Position ....................................................................................45

Changing the PIP Size ..........................................................................................45

Changing the PIP Aspect Ratio .............................................................................45

Swapping the Main and PIP Images .....................................................................46

Swapping the Main and PIP Audio Programs........................................................46

Stereo Sound/SAP (CX-52HD only) ............................................................................47

5. Maintenance and Troubleshooting ........................................................................49

Cleaning .....................................................................................................................49

Cleaning the Display Panel Body and Remote Control ..........................................49

Cleaning the Screen..............................................................................................49

Cleaning the Vents................................................................................................49

Troubleshooting Tips ..................................................................................................49

6. Serial Communications ..........................................................................................51

RS-232 Connection and Port Configuration ...............................................................51

Serial Command Syntax .............................................................................................51

7. Specifications ..........................................................................................................57

Crystal Series LCD Specifications ...............................................................................57

Crystal Series LCD Dimensions ..................................................................................59

Computer Signal Compatibility ...................................................................................61

Runco CX-52HD/CX-57HD Owner’s Operating Manual xi

1List of Figures

PRE

L

IMINAR

Y

2-1. Crystal Series LCD Controls and Indicators ..................................................................5

2-2. Crystal Series LCD Rear-Panel Inputs and Outputs ......................................................6

2-3. Crystal Series LCD Remote Control..............................................................................9

3-1. Antenna/Cable TV Connection (CX-52HD only) ..........................................................16

3-2. HDMI Connections .....................................................................................................17

3-3. Analog RGB Connections...........................................................................................18

3-4. Component Video Connections..................................................................................19

3-5. Composite and S-Video Connections.........................................................................19

3-6. AV OUT Connections .................................................................................................20

3-7. Connecting Headphones............................................................................................20

3-8. External Speaker Connection .....................................................................................21

3-9. Digital Audio Connection ............................................................................................21

3-10. RS-232 Control System Connection.........................................................................22

4-1. Crystal Series LCD OSD Menu Structure ....................................................................26

4-2. Typical PLUGE Pattern for Adjusting Brightness .........................................................29

4-3. Typical Gray Bar Pattern for Adjusting Contrast ..........................................................30

4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint................................31

4-5. Typical Test Pattern for Adjusting Sharpness..............................................................32

4-6. Crystal Series LCD Splash Screen..............................................................................42

7-1. CX-52HD Dimensions ................................................................................................59

7-2. CX-57HD Dimensions ................................................................................................60

List of Figures

xii Runco CX-52HD/CX-57HD Owner’s Operating Manual

PRE

L

IMINAR

Y

Notes:

Runco CX-52HD/CX-57HD Owner’s Operating Manual 1

PRE

L

IMINAR

Y

1.1

About This Manual

This Owner’s Manual describes how to install, set up and operate the Runco Crystal

Series Model CX-52HD and CX-57HD Flat-Panel LCDs. Throughout this manual, the

Runco CX-52HD and CX-57HD Flat-Panel LCDs are referred to simply as the “Crystal

Series LCD.”

Target AudienceRunco has prepared this manual to help home theater installers and end users get the

most out of the Crystal Series LCD.

Runco has made every effort to ensure that this manual is accurate as of the date it was

printed. However, because of ongoing product improvements and customer feedback, it

may require updating from time to time. You can always find the latest version of this and

other Runco product manuals on-line, at www.Runco.com.

If You Have Comments

About This Manual...

Runco welcomes your comments about this manual. Send them to techpub@runco.com.

Textual and Graphic

Conventions

Text Conventions: The following conventions are used in this manual, in order to clarify

the information and instructions provided:

• Remote control button identifiers are set in upper-case bold type; for example, “Press

EXIT to return to the previous menu.”

• Computer input (commands you type) and output (responses that appear on-screen) is

shown in monospace (fixed-width) type; for example: “To change the aspect ratio to

Letterbox, type [S4E0002.”

• All keys with functional names are initial-capped, set in bold type and enclosed in angle

brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc>

and <Tab>.

• <Enter> indicates that you may press either the RETURN or ENTER key on your

computer keyboard if it has both keys.

In addition to these conventions, underlining, boldface and/or italics are occasionally used

to highlight important information, as in this example:

1. Introduction

A carriage return must be used after each command or string.

Note

Introduction

2 Runco CX-52HD/CX-57HD Owner’s Operating Manual

PRE

L

IMINAR

Y

Graphic Conventions: These symbols appear in numerous places throughout the

manual, to emphasize points that you must keep in mind to avoid problems with your

equipment or injury:

1.2

Using This Manual

Use the following table to locate the specific information you need in this manual.

TIPS highlight time-saving short cuts and helpful guidelines for using

certain features.

NOTES emphasize text with unusual importance or special

significance. They also provide supplemental information.

CAUTIONS alert users that a given action or omitted action can

degrade performance or cause a malfunction.

WARNINGS appear when a given action or omitted action can result

in damage to the equipment, or possible non-fatal injury to the user.

DANGER appears when a given action can cause severe injury or

death.

Tip

Note

Caution

WARNING

DANGER!

If you need... ... Turn to page:

Information about obtaining service iv

General information about the CX-52HD and

CX-57HD Flat-Panel LCDs

3

Installation instructions 13

First-time configuration instructions 23

Advanced configuration instructions 40

Troubleshooting tips 49

Specifications for the CX-52HD and CX-57HD

Flat-Panel LCDs

57

Introduction

Runco CX-52HD/CX-57HD Owner’s Operating Manual 3

PRE

L

IMINAR

Y

1.3

Description, Features

and Benefits

Runco presents the Crystal Series CX-52HD and CX-57HD Flat-Panel LCDs, perfect for

those who demand our award-winning flat panel performance along with advanced LCD

technology and lightweight design.

The Crystal Series LCDs incorporate the superb Vivix™ digital video processing that

produces outstanding picture quality with a wide range of both standard and high

definition source material. In addition, the handsome, gloss black-finish television is

engineered with ISF™ calibration standards for the purest video performance.

The CX-52HD also features a built-in ATSC tuner that receives terrestrial DTV broadcasts,

in addition to an advanced, 185 channel, cable-ready NTSC stereo tuner. The CX-52HD

offers PIP, PBP, closed captioning, Parental Control (V-Chip) functionality and

multi-language support. The display includes an integrated stereo audio system

incorporating surround sound technology and generous power amplification.

The advanced, TFT active-matrix liquid crystal display panel offers 1920 x 1080 resolution

and includes Runco’s discrete aspect ratio control with VirtualWide™ mode to fill the 16:9

screen with standard 4:3 images without loss of picture quality. Also included are discrete

source, aspect ratio and power selection and an RS-232 interface for whole-house or

automated control system integration.

The Crystal Series LCD is multimedia ready, with simple computer connections making

gaming, Internet browsing and other computing activities quick and easy.

Key Features and BenefitsThe Crystal Series LCD offers these key features and benefits:

• Native Resolution: 1920 x 1080 (16:9 Native Aspect Ratio)

• Multiple Aspect Ratios with VirtualWide™ Mode

• Less than 5 inches deep

• Two HDMI Inputs with High-bandwidth Digital Content Protection (HDCP)

• Model CX-52HD has built-in HDTV Tuner

• Exceptional detail and artifact-free video enhancement

• Runco video processing with 3:2 film detection circuitry

Introduction

4 Runco CX-52HD/CX-57HD Owner’s Operating Manual

PRE

L

IMINAR

Y

Parts List Your Crystal Series LCD is shipped with the following items. If any items are missing or

damaged, please contact your Runco dealer or Runco Customer Service at (800)

23-RUNCO.

• CX-52HD or CX-57HD LCD Display (with Table Stand)

• Remote Control Unit and two (2), AAA-size batteries

• AC Power Cord

• Warranty information and registration card

• Runco CX-52HD/CX-57HD Owner’s Operating Manual (this document)

Optional Accessories:

• Wall Mount kit

➤

Runco CX-52HD/CX-57HD Owner’s Operating Manual 5

PRE

L

IMINAR

Y

2.1

Crystal Series LCD at a

Glance

Controls and IndicatorsFigure 2-1 shows the locations of the Crystal Series LCD controls and indicators.

Figure 2-1. Crystal Series LCD Controls and Indicators

1. TV/AV Button (Input Source Selection)

To select a source, press the TV/AV button (with no menus visible on-screen). Use

the CH

or CH button (see below) to highlight the desired input source and press

TV/AV again.

When a menu is visible on-screen, this button operates identically to the ENTER

button on the Crystal Series LCD remote control unit (refer to

Crystal Series LCD

Remote Control on page 9).

2. MENU Selection Button

Press this button to access the on-screen display (OSD) controls, or to exit the

current menu and return to the previous one.

2. Controls and Functions

TV/AV

MENU

+

–

VOL

CH

Right Side

7

6

1

2

3

4

5

Controls and Functions

6 Runco CX-52HD/CX-57HD Owner’s Operating Manual

PRE

L

IMINAR

Y

3. Volume Adjustment Buttons (VOL - / VOL +)

Use these buttons to adjust the sound volume. When a menu is visible on-screen,

these buttons operate identically to the left- and right-arrow (

and ) buttons on the

Crystal Series LCD remote control unit.

4. CH / CH

Use these buttons to scroll through available TV channels (CX-52HD only).

When a menu is visible on-screen, these buttons operate identically to the up- and

down-arrow (

and ) buttons on the Crystal Series LCD remote control unit.

5. Power Button

6. Remote Control Sensor

7. Status Indicator LED

- Lights red to indicate that the Crystal Series LCD is in standby mode;

- Lights green during power-on sequence and during normal operation;

- Flashes green when the Crystal Series LCD receives a signal from the remote

control.

Crystal Series LCD Inputs

and Outputs

Figure 2-2 shows the locations of the Crystal Series LCD inputs and outputs.

Figure 2-2. Crystal Series LCD Rear-Panel Inputs and Outputs

1. INPUT2 Audio Input

➤

L

R

Rear

INPUT2

INPUT4

INPUT3

INPUT4

INPUT3

INPUT1

S-VIDEO

VIDEO

Audio

Right Side

Monitor-Out

Controls and Functions

Runco CX-52HD/CX-57HD Owner’s Operating Manual 7

PRE

L

IMINAR

Y

2. INPUT2 Composite Video Input

Standard composite video input for connecting a VCR, camcorder, laser disc player

or other composite video source.

3. INPUT2 S-Video Input

Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS

(S-VHS) VCR.

4. Headphone Jack

5. Main Power Switch

6. Power Input (100 to 240 VAC)

Connect the Crystal Series LCD to power here.

7. RGB

A 15-pin VGA connection to a personal computer. The Crystal Series LCD

automatically detects the signal resolution.

8. HDMI1/Computer Input (Digital)

9. HDMI2/Computer Input (Digital)

Two, HDCP-compliant digital video inputs for connecting a DVD player, personal

computer or HD tuner with a DVI or HDMI output.

10. PC Audio Input

Connect the audio output from a personal computer here.

11. INPUT3 Component Video (RCA connectors)

Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component

input. This is the input for component video from sources such as DVD players.

12. INPUT3 Composite Video Input

13. INPUT3 Audio Input

Connect the audio output from your Input 3 source here.

14. INPUT4 Component Video (RCA connectors)

Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component

input. This is the input for component video from sources such as DVD players.

15. INPUT4 Composite Video Input

16. INPUT4 Audio Input

Connect the audio output from your Input 4 source here.

17. INPUT1 Composite Video Input

18. INPUT1 Audio Input

Connect the audio output from your Input 1 source here.

19. INPUT1 S-Video Input

20. Monitor-OUT (Composite Video)

21. Monitor-OUT (Audio)

For best results, do not run your DVD player in progressive mode.

Tip

Controls and Functions

8 Runco CX-52HD/CX-57HD Owner’s Operating Manual

PRE

L

IMINAR

Y

22. DIGITAL AUDIO OUT (S/PDIF – Coaxial)

23. DIGITAL AUDIO OUT (TosLink – Optical)

Connect either #22 or #23 to the digital audio input of an A/V amplifier with a Dolby

Digital

®

decoder.

24. AIR (Antenna) Input (CX-52HD only)

75-ohm coaxial input for connecting a TV antenna to the digital TV input.

25. CABLE Input (CX-52HD only)

75-ohm coaxial input for connecting a CATV system to the digital TV input.

26. RS-232 CONTROL PORT

A female, 9-pin D-sub connector for interfacing with a PC or home theater

automation/control system.

27. SPEAKER OUTPUT (RIGHT)

28. SPEAKER OUTPUT (LEFT)

For connection of the right (27) left (28) speakers. Connect a speaker with an

impedance of 4 ohms.

Page is loading ...

Runco CX-52HD User manual

This manual is also suitable for

Runco CX-52HD User manual

Related papers

Other documents