Runco CX-52HD User manual

Category
LCD TVs
Type
User manual

This manual is also suitable for

OWNERS OPERATING MANUAL
CX-52HD
CX-57HD
1080p High-Definition LCD Flat Panel Displays
with
Runco CX-52HD/CX-57HD Owner’s Operating Manual iii
PRE
L
IMINAR
Y
ONE YEAR LIMITED WARRANTY
For LCD Displays
Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces
“The World’s Finest Home Theater Products.” With proper installation, setup and care, you should enjoy many years of
unparalleled video performance.
This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your
other important documents.
SERVICE LABOR: Runco will pay for service labor by a Runco Authorized Service Center when needed as a result of a
manufacturing defect for a period of one (1) year from the effective date of delivery to the end user.
PARTS: Runco will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship
for a period of one (1) year from the effective date of delivery to the end user. Such replacement parts are then subsequently
warranted for the remaining portion (if any) of the original warranty period.
Image retention on LCD display panels is specifically excluded from coverage under this Limited Warranty. Image retention or
staining of an image is the result of misuse of the product and therefore cannot be repaired under the terms of this Limited
Warranty.
Normal viewing material such as television/satellite broadcasts, videotape or DVDs (not put into pause for extended periods of
time) will not cause damage to your display under normal conditions. Many DVD players are also equipped with screen savers
for this reason.
TO AVOID IMAGE RETENTION (Burn-in): Please ensure that still images are not left on your LCD display panel. Also
ensure that images displayed in the 4:3 aspect ratio mode (black or gray stripes, but no picture information is present on the
left and right edges of the screen) are used as infrequently as possible. This will prevent permanent retention on your LCD
display panel, which can be seen permanently under certain conditions once burn-in has occurred.
The types of images to avoid include video games, still images and computer screens with stationary tool bars and icons. (This
is why computers are equipped with screen savers – to prevent still images from burning into the monitor’s phosphors after
being displayed continuously for an extended period of time).
This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does
not cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from
accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper
maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and
brownouts; damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote
control units, damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this
Limited Warranty.
CAUTION: THIS LIMITED WARRANTY ONLY COVERS RUNCO PRODUCTS PURCHASED FROM RUNCO AUTHORIZED
DEALERS. ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED
WARRANTY. MOREOVER, DAMAGE RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP
IS SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY. IT IS IMPERATIVE THAT
INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN AUTHORIZED RUNCO DEALER TO PROTECT YOUR
RIGHTS UNDER THIS WARRANTY. THIS WILL ALSO ENSURE THAT YOU ENJOY THE FINE PERFORMANCE OF WHICH
YOUR RUNCO PRODUCT IS CAPABLE WHEN INSTALLED AND CALIBRATED BY RUNCO AUTHORIZED PERSONNEL.
WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:
WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:
iv Runco CX-52HD/CX-57HD Owner’s Operating Manual
PRE
L
IMINAR
Y
Runco limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There
are no express warranties. Runco also excludes any obligation on its part for incidental or consequential damages related to
the failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and
some states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from
state to state.
This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as
evidence of the purchase date.
Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we
should discover a safety problem or product update for which you must be notified.
Repairs made under the terms of this Limited Warranty covering your Runco video product will be performed at the location of
the product, during usual working hours, providing location of product is within normal operating distance from a Runco
Authorized Service Center. In some instances it may be necessary for the product to be returned to the Runco factory for
repairs. If, solely in Runco’s judgment, location of product to be repaired is beyond normal operating distance of the closest
Runco Authorized Service Center, or the repair requires the unit be returned to the Runco factory, it is the owner’s
responsibility to arrange for shipment of the product for repair. These arrangements must be made through the selling Runco
Dealer. If this is not possible, contact Runco directly for a Return Authorization number and shipping instructions. Runco will
return product transportation prepaid in the United States, unless no product defect is discovered. In that instance, shipping
costs will be the responsibility of the owner.
© Copyright 2007 Runco International. This document contains proprietary information protected by copyright, trademark and
other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any mechanical,
electronic or other means, in any form, without prior written permission of the manufacturer.
Reflection, Enhanced GEN3, DHD, Vivix, Virtual Cinema, CineWide, AutoScope, O-Path, CinOptx, LiveLink, CSMS, SuperOnyx
and VirtualWide are trademarks of Runco International. All other trademarks and registered trademarks used in this document
are the property of their respective owners.
Runco International products are manufactured under one or more of the following patents: US. Patent 6755540 and Other
Patents Pending.
RIGHTS, LIMITS AND EXCLUSIONS:
EFFECTIVE WARRANTY DATE:
IMPORTANT – WARRANTY REGISTRATION:
CONTACT A RUNCO AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:
COPYRIGHT AND TRADEMARKS:
Runco CX-52HD/CX-57HD Owner’s Operating Manual v
PRE
L
IMINAR
Y
To locate the name and address of the nearest Runco Authorized Service Center, or for additional information about this
Limited Warranty, please call or write:
RUNCO INTERNATIONAL, INC.
Attn: Customer Service Department
2900 Faber Street
Union City, CA 94587
Ph: (510) 324-7777
Fax: (510) 324-9300
Toll Free: (800) 23-RUNCO
RUNCO VIDEO-PRODUCT INFORMATION
RETAIN THIS INFORMATION FOR YOUR RECORDS
_________________________________________________________ ________________________________________
Model Purchased Date
____________________________________________________________________________________________________________
Serial Number
____________________________________________________________________________________________________________
Runco Authorized Dealer Name
____________________________________________________________________________________________________________
Address
____________________________________________ __________________ ________________________
City State/Province Postal Code
____________________________________________ _______________________________________________________
Phone Fax
ADDITIONAL INFORMATION:
vi Runco CX-52HD/CX-57HD Owner’s Operating Manual
PRE
L
IMINAR
Y
Thank you for your purchase of this quality Runco product! For best performance, please read this manual carefully as it is your
guide through the menus and operation.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point
where they exit from the apparatus.
11. Only use the attachments/accessories specified by Runco.
12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Important Safety Instructions
WARNING
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Runco CX-52HD/CX-57HD Owner’s Operating Manual vii
PRE
L
IMINAR
Y
Manufacturer’s Name: Runco International, a subsidiary of Planar Systems, Inc.
Manufacturer’s Address: 2900 Faber Street, Union City, CA 94587
hereby declares that the products Model Numbers:
CX-52HD, CX-57HD
conform with the provisions of:
Council Directive 2004/108/EC on Electromagnetic Compatibility;
EN 55022 “Limits and methods of measurements of radio interference characteristics of information technology equipment”
1998;
EN 55024 “Limits and methods of measurements of immunity characteristics of information technology equipment” 1998;
Including:
EN 61000-4-2 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 2:
Electrostatic discharge immunity test”
EN 61000-4-3 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 3: Radiated,
Radio-Frequency, Electromagnetic Field Immunity Test”
EN 61000-4-4 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 4: Electrical
fast transient/burst immunity test”
EN 61000-4-5 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 5: Surge
immunity test"
EN 61000-4-6 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 6: Conducted
disturbances induced by radio-frequency fields immunity test"
EN 61000-4-8 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 8: Conducted
disturbances induced by power frequency magnetic fields immunity test"
EN 61000-4-11 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 11: Voltage
dips, short interruptions and voltage variations immunity tests"
And:
EN 61000-3-2 "Electromagnetic compatibility (EMC) Part 3, Section 2: Limits for harmonic current emissions (equipment
input current up to and including 16 A per phase)" 2000;
EN 61000-3-3 "Electromagnetic compatibility (EMC) Part 3, Section 3: Limitations of voltage changes, voltage
fluctuations and flicker in public low-voltage supply systems, for equipment with rated current up to and including 16 A
and not subject to conditional connection" 1995;
Council Directive 2006/95/EC and amended by M1 and C1 on Low Voltage Equipment Safety;
EN 60950 “Safety of information technology equipment, including electrical business equipment”
The Technical Construction file required by this Directive is maintained at the corporate headquarters of Planar Systems, Inc.,
1195 NW Compton Drive, Beaverton, OR 97006.
Date of Declaration: October 2007
Compliance Information
DECLARATION OF CONFORMITY:
viii Runco CX-52HD/CX-57HD Owner’s Operating Manual
PRE
L
IMINAR
Y
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be
hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws.
For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG.
For lamp specific disposal information check WWW.LAMPRECYCLE.ORG.
This symbol found on your product or on its packaging, indicates that this product should not be treated as
household waste when you wish to dispose of it. Instead, it should be handed over to an applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences to the environment and human health, which could
otherwise be caused by inappropriate disposal of this product. The recycling of materials will help to conserve
natural resources. This symbol is only valid in the European Union. If you wish to discard this product, please
contact your local authorities or dealer and ask for the correct method of disposal.
FCC PART 15:
INDUSTRY CANADA (ICES-003):
IMPORTANT RECYCLE INSTRUCTIONS
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT (Applicable throughout the European
Union and other European countries with separate collection programs)
Runco CX-52HD/CX-57HD Owner’s Operating Manual ix
1Table of Contents
PRE
L
IMINAR
Y
ONE YEAR LIMITED WARRANTY .................................................................................. iii
Important Safety Instructions ........................................................................................ vi
Compliance Information ............................................................................................... vii
1. Introduction ...............................................................................................................1
About This Manual .......................................................................................................1
Target Audience .....................................................................................................1
If You Have Comments About This Manual... ..........................................................1
Textual and Graphic Conventions ...........................................................................1
Using This Manual ........................................................................................................2
Description, Features and Benefits ...............................................................................3
Key Features and Benefits ......................................................................................3
Parts List ...............................................................................................................4
2. Controls and Functions ............................................................................................5
Crystal Series LCD at a Glance ....................................................................................5
Controls and Indicators...........................................................................................5
Crystal Series LCD Inputs and Outputs...................................................................6
Crystal Series LCD Remote Control ..............................................................................9
3. Installation ...............................................................................................................13
Remote Control ..........................................................................................................13
Battery Installation ................................................................................................13
Notes on Remote Control Operation.....................................................................13
Quick Setup ...............................................................................................................14
Installation Considerations ..........................................................................................15
Wall-Mounting the Crystal Series LCD ..................................................................15
Ambient Light .......................................................................................................15
Other Considerations ............................................................................................15
Connections to the Crystal Series LCD .......................................................................16
Connecting the Crystal Series LCD to Source Components..................................16
AV OUT Connection .............................................................................................20
Connecting Headphones ......................................................................................20
Connecting External Speakers (Optional) ..............................................................21
Connecting to a Dolby Digital Amplifier..................................................................21
RS-232 Controller Connection ..............................................................................22
Table of Contents
x Runco CX-52HD/CX-57HD Owner’s Operating Manual
PRE
L
IMINAR
Y
4. Operation .................................................................................................................23
Turning on the Power .................................................................................................23
Changing the OSD Language .....................................................................................23
Setting the PC Display Properties ...............................................................................24
Using the On-Screen Menus ......................................................................................25
Main Menu ...........................................................................................................27
Source .................................................................................................................27
Aspect Ratio ........................................................................................................27
Picture Adjust .......................................................................................................29
Audio ...................................................................................................................33
Channel (CX-52HD only) ......................................................................................34
Timer (CX-52HD only) ..........................................................................................35
Setup....................................................................................................................36
ISF Calibration .....................................................................................................40
Using Picture-In-Picture (PIP) .....................................................................................43
Changing the PIP Position ....................................................................................45
Changing the PIP Size ..........................................................................................45
Changing the PIP Aspect Ratio .............................................................................45
Swapping the Main and PIP Images .....................................................................46
Swapping the Main and PIP Audio Programs........................................................46
Stereo Sound/SAP (CX-52HD only) ............................................................................47
5. Maintenance and Troubleshooting ........................................................................49
Cleaning .....................................................................................................................49
Cleaning the Display Panel Body and Remote Control ..........................................49
Cleaning the Screen..............................................................................................49
Cleaning the Vents................................................................................................49
Troubleshooting Tips ..................................................................................................49
6. Serial Communications ..........................................................................................51
RS-232 Connection and Port Configuration ...............................................................51
Serial Command Syntax .............................................................................................51
7. Specifications ..........................................................................................................57
Crystal Series LCD Specifications ...............................................................................57
Crystal Series LCD Dimensions ..................................................................................59
Computer Signal Compatibility ...................................................................................61
Runco CX-52HD/CX-57HD Owner’s Operating Manual xi
1List of Figures
PRE
L
IMINAR
Y
2-1. Crystal Series LCD Controls and Indicators ..................................................................5
2-2. Crystal Series LCD Rear-Panel Inputs and Outputs ......................................................6
2-3. Crystal Series LCD Remote Control..............................................................................9
3-1. Antenna/Cable TV Connection (CX-52HD only) ..........................................................16
3-2. HDMI Connections .....................................................................................................17
3-3. Analog RGB Connections...........................................................................................18
3-4. Component Video Connections..................................................................................19
3-5. Composite and S-Video Connections.........................................................................19
3-6. AV OUT Connections .................................................................................................20
3-7. Connecting Headphones............................................................................................20
3-8. External Speaker Connection .....................................................................................21
3-9. Digital Audio Connection ............................................................................................21
3-10. RS-232 Control System Connection.........................................................................22
4-1. Crystal Series LCD OSD Menu Structure ....................................................................26
4-2. Typical PLUGE Pattern for Adjusting Brightness .........................................................29
4-3. Typical Gray Bar Pattern for Adjusting Contrast ..........................................................30
4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint................................31
4-5. Typical Test Pattern for Adjusting Sharpness..............................................................32
4-6. Crystal Series LCD Splash Screen..............................................................................42
7-1. CX-52HD Dimensions ................................................................................................59
7-2. CX-57HD Dimensions ................................................................................................60
List of Figures
xii Runco CX-52HD/CX-57HD Owner’s Operating Manual
PRE
L
IMINAR
Y
Notes:
Runco CX-52HD/CX-57HD Owner’s Operating Manual 1
PRE
L
IMINAR
Y
1.1
About This Manual
This Owner’s Manual describes how to install, set up and operate the Runco Crystal
Series Model CX-52HD and CX-57HD Flat-Panel LCDs. Throughout this manual, the
Runco CX-52HD and CX-57HD Flat-Panel LCDs are referred to simply as the “Crystal
Series LCD.”
Target AudienceRunco has prepared this manual to help home theater installers and end users get the
most out of the Crystal Series LCD.
Runco has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Runco product manuals on-line, at www.Runco.com.
If You Have Comments
About This Manual...
Runco welcomes your comments about this manual. Send them to techpub@runco.com.
Textual and Graphic
Conventions
Text Conventions: The following conventions are used in this manual, in order to clarify
the information and instructions provided:
Remote control button identifiers are set in upper-case bold type; for example, “Press
EXIT to return to the previous menu.”
Computer input (commands you type) and output (responses that appear on-screen) is
shown in monospace (fixed-width) type; for example: “To change the aspect ratio to
Letterbox, type [S4E0002.”
All keys with functional names are initial-capped, set in bold type and enclosed in angle
brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc>
and <Tab>.
<Enter> indicates that you may press either the RETURN or ENTER key on your
computer keyboard if it has both keys.
In addition to these conventions, underlining, boldface and/or italics are occasionally used
to highlight important information, as in this example:
1. Introduction
A carriage return must be used after each command or string.
Note
Introduction
2 Runco CX-52HD/CX-57HD Owner’s Operating Manual
PRE
L
IMINAR
Y
Graphic Conventions: These symbols appear in numerous places throughout the
manual, to emphasize points that you must keep in mind to avoid problems with your
equipment or injury:
1.2
Using This Manual
Use the following table to locate the specific information you need in this manual.
TIPS highlight time-saving short cuts and helpful guidelines for using
certain features.
NOTES emphasize text with unusual importance or special
significance. They also provide supplemental information.
CAUTIONS alert users that a given action or omitted action can
degrade performance or cause a malfunction.
WARNINGS appear when a given action or omitted action can result
in damage to the equipment, or possible non-fatal injury to the user.
DANGER appears when a given action can cause severe injury or
death.
Tip
Note
Caution
WARNING
DANGER!
If you need... ... Turn to page:
Information about obtaining service iv
General information about the CX-52HD and
CX-57HD Flat-Panel LCDs
3
Installation instructions 13
First-time configuration instructions 23
Advanced configuration instructions 40
Troubleshooting tips 49
Specifications for the CX-52HD and CX-57HD
Flat-Panel LCDs
57
Introduction
Runco CX-52HD/CX-57HD Owner’s Operating Manual 3
PRE
L
IMINAR
Y
1.3
Description, Features
and Benefits
Runco presents the Crystal Series CX-52HD and CX-57HD Flat-Panel LCDs, perfect for
those who demand our award-winning flat panel performance along with advanced LCD
technology and lightweight design.
The Crystal Series LCDs incorporate the superb Vivix™ digital video processing that
produces outstanding picture quality with a wide range of both standard and high
definition source material. In addition, the handsome, gloss black-finish television is
engineered with ISF™ calibration standards for the purest video performance.
The CX-52HD also features a built-in ATSC tuner that receives terrestrial DTV broadcasts,
in addition to an advanced, 185 channel, cable-ready NTSC stereo tuner. The CX-52HD
offers PIP, PBP, closed captioning, Parental Control (V-Chip) functionality and
multi-language support. The display includes an integrated stereo audio system
incorporating surround sound technology and generous power amplification.
The advanced, TFT active-matrix liquid crystal display panel offers 1920 x 1080 resolution
and includes Runco’s discrete aspect ratio control with VirtualWide™ mode to fill the 16:9
screen with standard 4:3 images without loss of picture quality. Also included are discrete
source, aspect ratio and power selection and an RS-232 interface for whole-house or
automated control system integration.
The Crystal Series LCD is multimedia ready, with simple computer connections making
gaming, Internet browsing and other computing activities quick and easy.
Key Features and BenefitsThe Crystal Series LCD offers these key features and benefits:
Native Resolution: 1920 x 1080 (16:9 Native Aspect Ratio)
Multiple Aspect Ratios with VirtualWide™ Mode
Less than 5 inches deep
Two HDMI Inputs with High-bandwidth Digital Content Protection (HDCP)
Model CX-52HD has built-in HDTV Tuner
Exceptional detail and artifact-free video enhancement
Runco video processing with 3:2 film detection circuitry
Introduction
4 Runco CX-52HD/CX-57HD Owner’s Operating Manual
PRE
L
IMINAR
Y
Parts List Your Crystal Series LCD is shipped with the following items. If any items are missing or
damaged, please contact your Runco dealer or Runco Customer Service at (800)
23-RUNCO.
CX-52HD or CX-57HD LCD Display (with Table Stand)
Remote Control Unit and two (2), AAA-size batteries
AC Power Cord
Warranty information and registration card
Runco CX-52HD/CX-57HD Owner’s Operating Manual (this document)
Optional Accessories:
Wall Mount kit
Runco CX-52HD/CX-57HD Owner’s Operating Manual 5
PRE
L
IMINAR
Y
2.1
Crystal Series LCD at a
Glance
Controls and IndicatorsFigure 2-1 shows the locations of the Crystal Series LCD controls and indicators.
Figure 2-1. Crystal Series LCD Controls and Indicators
1. TV/AV Button (Input Source Selection)
To select a source, press the TV/AV button (with no menus visible on-screen). Use
the CH
or CH button (see below) to highlight the desired input source and press
TV/AV again.
When a menu is visible on-screen, this button operates identically to the ENTER
button on the Crystal Series LCD remote control unit (refer to
Crystal Series LCD
Remote Control on page 9).
2. MENU Selection Button
Press this button to access the on-screen display (OSD) controls, or to exit the
current menu and return to the previous one.
2. Controls and Functions
TV/AV
MENU
+
VOL
CH
Right Side
7
6
1
2
3
4
5
Controls and Functions
6 Runco CX-52HD/CX-57HD Owner’s Operating Manual
PRE
L
IMINAR
Y
3. Volume Adjustment Buttons (VOL - / VOL +)
Use these buttons to adjust the sound volume. When a menu is visible on-screen,
these buttons operate identically to the left- and right-arrow (
and ) buttons on the
Crystal Series LCD remote control unit.
4. CH / CH
Use these buttons to scroll through available TV channels (CX-52HD only).
When a menu is visible on-screen, these buttons operate identically to the up- and
down-arrow (
and ) buttons on the Crystal Series LCD remote control unit.
5. Power Button
6. Remote Control Sensor
7. Status Indicator LED
- Lights red to indicate that the Crystal Series LCD is in standby mode;
- Lights green during power-on sequence and during normal operation;
- Flashes green when the Crystal Series LCD receives a signal from the remote
control.
Crystal Series LCD Inputs
and Outputs
Figure 2-2 shows the locations of the Crystal Series LCD inputs and outputs.
Figure 2-2. Crystal Series LCD Rear-Panel Inputs and Outputs
1. INPUT2 Audio Input
L
R
Rear
INPUT2
INPUT4
INPUT3
INPUT4
INPUT3
INPUT1
INPUT1
S-VIDEO
VIDEO
Audio
Right Side
Monitor-Out
Monitor-Out
Controls and Functions
Runco CX-52HD/CX-57HD Owner’s Operating Manual 7
PRE
L
IMINAR
Y
2. INPUT2 Composite Video Input
Standard composite video input for connecting a VCR, camcorder, laser disc player
or other composite video source.
3. INPUT2 S-Video Input
Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS
(S-VHS) VCR.
4. Headphone Jack
5. Main Power Switch
6. Power Input (100 to 240 VAC)
Connect the Crystal Series LCD to power here.
7. RGB
A 15-pin VGA connection to a personal computer. The Crystal Series LCD
automatically detects the signal resolution.
8. HDMI1/Computer Input (Digital)
9. HDMI2/Computer Input (Digital)
Two, HDCP-compliant digital video inputs for connecting a DVD player, personal
computer or HD tuner with a DVI or HDMI output.
10. PC Audio Input
Connect the audio output from a personal computer here.
11. INPUT3 Component Video (RCA connectors)
Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component
input. This is the input for component video from sources such as DVD players.
12. INPUT3 Composite Video Input
13. INPUT3 Audio Input
Connect the audio output from your Input 3 source here.
14. INPUT4 Component Video (RCA connectors)
Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component
input. This is the input for component video from sources such as DVD players.
15. INPUT4 Composite Video Input
16. INPUT4 Audio Input
Connect the audio output from your Input 4 source here.
17. INPUT1 Composite Video Input
18. INPUT1 Audio Input
Connect the audio output from your Input 1 source here.
19. INPUT1 S-Video Input
20. Monitor-OUT (Composite Video)
21. Monitor-OUT (Audio)
For best results, do not run your DVD player in progressive mode.
Tip
Controls and Functions
8 Runco CX-52HD/CX-57HD Owner’s Operating Manual
PRE
L
IMINAR
Y
22. DIGITAL AUDIO OUT (S/PDIF – Coaxial)
23. DIGITAL AUDIO OUT (TosLink – Optical)
Connect either #22 or #23 to the digital audio input of an A/V amplifier with a Dolby
Digital
®
decoder.
24. AIR (Antenna) Input (CX-52HD only)
75-ohm coaxial input for connecting a TV antenna to the digital TV input.
25. CABLE Input (CX-52HD only)
75-ohm coaxial input for connecting a CATV system to the digital TV input.
26. RS-232 CONTROL PORT
A female, 9-pin D-sub connector for interfacing with a PC or home theater
automation/control system.
27. SPEAKER OUTPUT (RIGHT)
28. SPEAKER OUTPUT (LEFT)
For connection of the right (27) left (28) speakers. Connect a speaker with an
impedance of 4 ohms.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Runco CX-52HD User manual

Category
LCD TVs
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI