Liebert IntelliRack User manual

Liebert
Brand
Liebert
Model
IntelliRack
Category
Power supply units
Type
User manual
SL-31094 Product Specification/Installation Sheet page 1 2/04 (Rev. 0)
INTELLIRACK
Description
The IntelliRack is a
powerful multiplexing
device that allows a
Liebert UPS of any size
to communicate with a
virtually unlimited
number of computers.
The IntelliRack unit has five Intellislots for
MultiPort 4 cards that can be connected to as
many as four computers each. An IntelliRack
unit with five MultiPort 4 cards installed will
notify up to 20 computers of power failure and
low battery conditions.
A built-in bridging capability permits daisy-
chaining IntelliRack units together, accommodat-
ing a virtually unlimited number of computers—
limited only by the capacity of the UPS.
When a power failure or low battery arises in
the UPS, the IntelliRack sends notifications to
all systems connected to the IntelliRack. One
example of a connected system is a network of
computers running Liebert’s MultiLink™
shutdown software.
For other applications, contact your local
Liebert representative or call 1-800-222-5877.
Features and Benefits
• 1U Rack Space
• 19" or 23" Rack Mounting Brackets
• Dual Power Supply Inputs
• Universal Power Supply
• Modular and Scalable
• Dedicated Communications from UPS
to Each Computer
• LED Notification
• Multiple Operating System Support
• Daisy-Chain Modules
• Integration with MultiLink Automated
Shutdown Software
• Unlimited Number of Computer Systems
• Connects to all Liebert UPS systems
Specifications
EMERSON
N
etw
o
r
k Pow
er
Bridg
ing
AC
Fail
Low
Battery
Transm
it
(TX)
Receive
(RX)
Power Inputs:
Powe
r
12 V D
C 1.5A
R
edu
n
dan
t P
o
w
e
r
IntelliRack
U
PS
O
U
T
IN
+
—
Connect
to UPS
Power connectors
and indicators
(green)
UPS
warning
indicators
(red)
Connect
to other
IntelliRack
units
Screw
holes
for rack
mounting
brackets
FRONT VIEW
BACK VIEW
1234
MultiPort4
Slot 1
(shown with
MultiPort 4
card installed)
Slots 2-5 for
additional cards
(shown with covers)
Power Requirements
(2 inputs)
12VDC ±10% of nominal;
50/60 Hz, 1.5A, 18VA
Dimensions
W x D x H, in. (mm)
16 x 9 x 1.66
(406.4 x 228.6 x 42.2)
Weight 9.9 lbs. (4.5 kg)
Mounting 19" or 23" rack mount or 23" desktop
Ambient Operating
Environment
32ºF to 104ºF (0ºC to 40ºC)
0% RH to 95% RH (non-condensing)
Agency Listings
UL None
CSA None
CE None
FCC Compliance None
Communication Ports (Quantity)
DB9 (1) To UPS; uses adapters (included)
RJ45 (2)
Bridges multiple IntelliRacks together;
uses RJ45 cables (included)
Intellislots (5) Hot-swappable ports
SL-31094 Product Specification/Installation Sheet page 2 2/04 (Rev. 0)
Hardware and Components
Dimensions
Wiring Specifications
Ordering Information
Connection Provided / Purchased Separately Maximum Length*
RJ45 cable to connect UPS to MultiPort
6 & 25 ft. (1.8 & 7.6m); 2 cables provided 300 ft. (91m)
RJ45 cable to connect Bridging Port
MultiLink / AS400 cable 10 ft. (3m); Purchased separately 100 ft. (31m)
* For longer cables, refer to the IntelliRack user manual.
Quantity Part # Description
INTELLIRACK
IntelliRack unit, two DB9-to-RJ45 adapters, two RJ45 cables, a universal power supply and
two line cords (120V & 230V)
IRACKUNIVPS Secondary power connection for the IntelliRack’s redundant port (requires 12VDC)
MULTIPORT4 MultiPort 4 kit with one MultiPort 4 card and one molded cable assembly with four connectors
IRACKMLADPT Liebert MultiLink Cable Adapter Kit with two DB9-to-RJ45 adapters
EMERSON
N
e
t
w
o
r
k
P
o
w
e
r
Bridging
AC
Fail
Low
Battery
Trans mi t
(TX)
Receive
(RX)
P
o
w
e
r
I
n
p
u
t
s
:
P
o
w
e
r
1
2
V
D
C
1
.5
A
R
e
d
u
n
d
a
n
t
P
o
w
e
r
I
nte
lli
Ra
ck
UPS
OUT
IN
+
—
EMERSON
N
e
t
w
o
r
k
P
o
w
e
r
Bridging
AC
Fail
Low
Battery
Trans mi t
(TX)
Receive
(RX)
P
o
w
e
r In
p
u
ts
:
P
o
w
e
r
1
2
V
D
C
1
.5
A
R
e
d
u
n
d
a
n
t
P
ow
e
r
Int
elliR
a
c
k
UPS
OUT
IN
+
—
IntelliRack
RJ45 cable (2 provided)
Daisy-chain to another
IntelliRack
MP-ADP-02 adapter
(DB9-to-RJ45)
Universal power
supply
* Item purchased separately
MP-ADP-01 adapter
(DB9-to-RJ45)
Connects to UPS:
either A or B below,
depending on type
of UPS
A
(for UPS with DB9 port)
MP-ADP-01 connects
to DB9 port of UPS
RJ45 cable (2 provided)
Connect to UPS
B
(for UPS with no DB9 port)
MP-ADP-01 adapter connects to open-wire adapter
(SNS3ADPT, at left)* which connects to UPS
OR
Universal power
supply
120V or 230V
power cord
(120V shown)
120V or 230V
power cord
(230V shown)
16"
(406.4mm)
SIDE VIEWTOP VIEW
9"
(228.6mm)
1.66"
(42.2mm)
9"
(228.6mm)
1.66"
(42.2mm)
16"
(406.4mm)
FRONT VIEW
  • Page 1 1
  • Page 2 2

Liebert IntelliRack User manual

Liebert
Brand
Liebert
Model
IntelliRack
Category
Power supply units
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents