Cordpro CPM5 Installation guide

Type
Installation guide
Installation and Use Instructions
1. At Cordpro tab,
flex open sidewall and
insert cord end on top of
divider and push through
handle opening.
2. Flex open opposite
sidewall at Cordpro tab
and pull cord end over
the divider and out other
side. Cord will then be
passing through the
divider.
3. Pull cord halfway
through unit. (Example:
For 10 ft. cord, pull 5 ft.
through.) Cordpro will
then be in middle of cord.
To Store Cord - Grip
Cordpro by handle and
wrap both cord ends
in SAME direction.
Each half will fall into
its own compartment.
Cord ends can now be
unreeled separately or
both at the same time.
US Patent No. 5,992,787
Intl. Patents and Additional Patents Pending
AVOID OVERHEATING
All power cords generate heat when used.
Know cord and appliance ratings before use.
1000 Watt limit when used coiled
NO LIMIT if used uncoiled
Cord
pro
®
CAPACITIES
REELS THAT MAKE SENSE
Need a different size or have a GFI cord?
See full line of products at www.cordpro.com
50 ft. 18 ga. speaker wire
40 ft. Phone line
20 ft. Microphone cable
15 ft. SVHS video cable
15 ft. USB or RJ-45 ethernet cable
12 ft. 18/2 household elec. cord
10 ft. 16/3 electrical cord
  • Page 1 1

Cordpro CPM5 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI