InSinkErator PRO1100XLCORD User manual

Type
User manual
PRO 1100XL®
Ultimate Performing Food Waste Disposer/
Triturador de Desperdicious de Alimentos de Máximo Rendimiento/Broyeur de Déchets À Rendement Ultime
The Emerson logo is a trademark and service mark of Emerson Electric Co. Printed in U.S.A. © 2017 InSinkErator, a business unit of Emerson Electric Co. All Rights Reserved.
El logotipo de Emerson es una marca registrada y una marca de servicio de Emerson Electric Co.
Impreso en los EE.UU. © 2017 InSinkErator, una unidad comercial de Emerson Electric Co. Todos los derechos reservados.
Le logo Emerson est une marque de commerce et une marque de service de Emerson Electric Co. Imprimé aux É.-U. © 2017 InSinkErator, une unité commerciale d'Emerson Electric Co. Tous droits réservés.
2
The Evolution Series® by InSinkErator® sets the standard for sound and grind performance. Featuring exclusive 
patented SoundSeal® and MultiGrind® technologies, no food waste disposer grinds more with less noise.
La serie Evolution® de InSinkErator® define la norma en desempeño de sonido y trituración. Con las exclusivas  
tecnologías patentadas SoundSeal® y MultiGrind®, ningún triturador de desperdicios tritura 
más con menos ruido.
La série Evolution Series® d’InSinkErator® établit la norme en matière de son et de rendement de broyage.  
Technologies brevetées exclusives SoundSeal® et MultiGrind®, aucun broyeur ne broie plus de déchets aussi  
silencieusement.
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
Anti-Microbial Quiet
Collar
®
Sink Baffle
Anti-Vibration Mount
®
Anti-Vibration
Tailpipe Mount
Multi-Layer SoundLimiter
Insulation
GrindShear Ring
®
Tri-Action Lug
®
System
Undercutter Disk
®
Jam-Sensor
®
Circuit
Quick Lock
®
Sink Mount
1 HP Heavy Duty
Dura-Drive
®
Motor
Stainless Steel Grind
Components
Auto-Reverse
Grind System
®
Deflector del fregadero
antimicrobiano Quiet Collar
®
Anti-Vibration Mount
®
Anti-Vibration
Tailpipe Mount
Aislamiento Multi-Layer
SoundLimiter™
GrindShear Ring
®
Función de sistema
de orjetas triacción
Tri-Action Lug
®
Undercutter Disk
®
Función de circuito
detector de obstrucciones
Jam-Sensor
®
Montaje del fregadero
Quick Lock
®
Motor Dura Drive
®
de 1 HP de alto rendimiento
Componentes de trituración
de acero inoxidable
Auto-Reverse Grind
System
®
Écran d’évier antimicrobien
Quiet Collar
®
Anti-Vibration Mount
®
Anti-Vibration
Tailpipe Mount™
Isolant multicouche
SoundLimiter™
GrindShear Ring
®
Fonction du système
Tri-Action Lug
®
Undercutter Disk
®
Fonction du circuit
Jam-Sensor
®
Outil de montage Quick Lock
®
Moteur à grande puissance
0,75 kW Dura-Drive
®
Composants de broyage
en acier inoxydable
Grind System
®
à inversion
automatique
1
2
3
4
10
11
5
6
7
8
9
12
Sound Seal
®
Technology
Sound Seal
®
Tecnología
Sound Seal
®
Technologie
Multi Grind
®
Technology
Multi Grind
®
Tecnología
Multi Grind
®
Technologie
Read all warnings before proceeding.
Lea todas las advertencias antes de continuar.
Lire tous les avertissements avant de procéder.
Dimensions/Dimensiones/Dimensions
!
!
!
9
"
5 3/4
"
13"
4
"
6 11/16
"
PRO 1100XL®
Ultimate Performing Food Waste Disposer/
Triturador de Desperdicious de Alimentos de Máximo Rendimiento/Broyeur de Déchets À Rendement Ultime
The Emerson logo is a trademark and service mark of Emerson Electric Co. Printed in U.S.A. © 2017 InSinkErator, a business unit of Emerson Electric Co. All Rights Reserved.
El logotipo de Emerson es una marca registrada y una marca de servicio de Emerson Electric Co.
Impreso en los EE.UU. © 2017 InSinkErator, una unidad comercial de Emerson Electric Co. Todos los derechos reservados.
Le logo Emerson est une marque de commerce et une marque de service de Emerson Electric Co. Imprimé aux É.-U. © 2017 InSinkErator, une unité commerciale d'Emerson Electric Co. Tous droits réservés.
3
A
N
M
B
D
E
F
I
G
Includes/Incluye/Comprend
Stopper
Tapón
Bouchon
Anti-Microbial Quiet
Collar
®
Sink Baffle
Deflector del fregadero
antimicrobiano Quiet Collar
®
Écran d’évier antimicrobien
Quiet Collar
®
C
Sink Flange
Brida del fregadero
Collet d’évier
Fiber Gasket
Junta de fibra
Joint fibreux
Backup Flange
Brida de apoyo
Bride de retenue
Mounting Ring
Anillo de montaje
Anneau de montage
1-1/2” Screws
Tornillos de 1-1/2”
(3,81 cm)
Vis de 1-1/2 po
H
1-1/8” Screws
Tornillos de 1-1/8”
(2,85 cm)
Vis de 1-1/8 po
Snap Ring
Anillo de cierre
Jonc de blocage
Discharge Tube
Tubo de descarga
Tuyau de vidange
Discharge Tube
Tubo de descarga
Tuyau de vidange
Lower Mounting Ring
Anillo de montaje inferior
Anneau de montage inférieur
Anti-Vibration Mount
®
Anti-Vibration Mount
®
Anti-Vibration Mount
®
Dishwasher Inlet
Entrada del lavavajillas
Avaloir du lave-vaisselle
Anti-Vibration
Tailpipe Mount
Anti-Vibration
Tailpipe Mount
Anti-Vibration
Tailpipe Mount
Plumbers putty
Masilla de plomería
Mastic de plomberie
Wire Nuts
Tuercas para conectores
Serre-fils
Cable Connector
Conector para cable
Connecteur de câble
Not Included/No incluidos/Non compris
Tools and Materials/Herramientas y materiales/Outils et pièces
K
Jam-Buster™ Wrench
Llave Jam-Buster™
Clé Jam-Buster™
Spring Type Hose Clamp
Abrazadera de
manguera tipo resorte/
Bride de serrage à ressort
L
NOTICE: Failure to use the spring
type hose clamp provided voids
warranty./La garantía pierde validez
si no usala abrazadera de manguera
tipo resorte incluida./Le fait de ne
pasutiliser la bride de serrage à
ressortannule la garantie.
Disposer/Triturador/Broyeur
J
PRO 1100XL®
Ultimate Performing Food Waste Disposer/
Triturador de Desperdicious de Alimentos de Máximo Rendimiento/Broyeur de Déchets À Rendement Ultime
The Emerson logo is a trademark and service mark of Emerson Electric Co. Printed in U.S.A. © 2017 InSinkErator, a business unit of Emerson Electric Co. All Rights Reserved.
El logotipo de Emerson es una marca registrada y una marca de servicio de Emerson Electric Co.
Impreso en los EE.UU. © 2017 InSinkErator, una unidad comercial de Emerson Electric Co. Todos los derechos reservados.
Le logo Emerson est une marque de commerce et une marque de service de Emerson Electric Co. Imprimé aux É.-U. © 2017 InSinkErator, une unité commerciale d'Emerson Electric Co. Tous droits réservés.
5
6
Loosen the 3 screws on the mounting 
assembly./Afloje los 3 tornillos en el 
conjunto de montaje./Desserrer les 3 vis du 
montage.
7
8
Using a screwdriver, remove the snap ring./ 
Retire el anillo de cierre con un 
destornillador./Au moyen d’un tournevis, 
retirer le jonc de blocage.       
Remove flange from sink. Remove old 
plumber’s putty from sink with putty knife./
Retire la brida del fregadero. Retire la 
masilla de plomería vieja del fregadero con 
una espátula para masilla./Retirer le collet 
de l’évier. Enlever le mastic de plomberie 
usagé au moyen d’un couteau à mastic.   
If the new disposer mounting is the 
same as the old one, you can go to  
Step 14. 
Note: For sinks thicker than 3/8”, you 
will need to replace existing 1-1/2” 
screws with 1-1/8” screws (H). See  
Step 13.
Si el montaje del triturador nuevo es el 
mismo que el viejo, puede ir al Paso 14. 
Nota: Para los fregaderos con espesor 
mayor a 0.9 cm, deberá reemplazar 
los tornillos existentes de 3.8 cm por 
tornillos de 2.8 cm (H). Consulte el 
Paso 13.
Si le nouveau broyeur est similaire à 
l’ancien broyeur, passer à l’étape 14.
Note : Pour les éviers de plus de 0,9 cm 
d’épaisseur, il faut remplacer les vis de 
3,8 cm existantes par des vis de 2,8 cm 
po (H). Voir l’étape 13.
PRO 1100XL®
Ultimate Performing Food Waste Disposer/
Triturador de Desperdicious de Alimentos de Máximo Rendimiento/Broyeur de Déchets À Rendement Ultime
The Emerson logo is a trademark and service mark of Emerson Electric Co. Printed in U.S.A. © 2017 InSinkErator, a business unit of Emerson Electric Co. All Rights Reserved.
El logotipo de Emerson es una marca registrada y una marca de servicio de Emerson Electric Co.
Impreso en los EE.UU. © 2017 InSinkErator, una unidad comercial de Emerson Electric Co. Todos los derechos reservados.
Le logo Emerson est une marque de commerce et une marque de service de Emerson Electric Co. Imprimé aux É.-U. © 2017 InSinkErator, une unité commerciale d'Emerson Electric Co. Tous droits réservés.
9
For all grounded, cord-connected disposers:
This disposer must be grounded to reduce the risk of electric shock in the event 
of a malfunction or breakdown. Grounding provides a path of least resistance 
for electric current. If your disposer did not include a factory installed power 
cord, use a cord having an equipment-grounding conductor and a grounding plug. 
(InSinkErator power cord accessory CRD-00 recommended.) The plug must be 
plugged into an outlet that is properly installed and grounded in accordance with 
all local codes and ordinances.
For permanently connected disposers:
This disposer must be connected to a grounded, metal, permanent wiring system; 
or an equipment-grounding conductor must be run with the circuit conductors and 
connected to the equipment-grounding terminal or lead on the disposer.
Personal Injury: Do not position your head or body under disposer; unit could 
fall during removal or installation.
Improper connection of the equipment-grounding conductor can result in a  
risk of electric shock. Check with a qualified electrician or serviceman if you 
are in doubt as to whether the disposer is properly grounded. If the plug 
you are using does not fit the outlet, do not modify the plug or attempt to 
force the plug into the outlet – have a proper outlet installed by a qualified 
electrician.
• This disposer must be properly grounded.
• Do not attach ground wire to gas supply line.
• Disconnect power before installing or servicing disposer.
•  If three-prong grounded plug is used, plug must be inserted into three-hole 
grounded receptacle.
• All wiring must comply with local electrical codes. 
•  Do not reconnect electrical current at main service panel until proper 
grounds are installed.
CAUTION
WARNING
When using electric appliances, basic precautions are always to be followed, including:
WARNING
GROUNDING INSTRUCTIONS
15
Stop and read
Deténgase y lea
Arrêter et lire
1.  Remove stopper from sink opening and run cold water. 
2. Turn on wall switch to start disposer.
3. Slowly insert food waste into disposer. WARNING! Position stopper to minimize possible ejection of material while grinding.
4. After grinding is complete, turn disposer off and run water for a few seconds to flush drain line.
DO...
•  First turn on cold water and then turn on the disposer. Continue running cold 
water for several seconds after grinding is completed to flush the drain line.
•  Grind hard materials such as small bones, fruit pits, and ice. A scouring action is 
created by the particles inside the grind chamber.
• Grind peelings from citrus fruits to freshen up drain smells.
•  Use a disposer cleaner, degreaser, or deodorizer as necessary to relieve 
objectionable odors caused by grease build-up.
DON’T...
DON’T POUR GREASE OR FAT DOWN YOUR DISPOSER OR
ANY DRAIN. IT CAN BUILD UP IN PIPES AND CAUSE DRAIN
BLOCKAGES. PUT GREASE IN A JAR OR CAN AND DISPOSE
IN THE TRASH.
•  Don’t use hot water when grinding food waste. It is OK to drain hot 
water into the disposer between grinding periods.
•  Don’t fill disposer with a lot of vegetable peels all at once. Instead, turn the 
water and disposer on first and then feed the peels in gradually.
•  Don’t grind large amounts of egg shells or fibrous materials like corn husks, 
artichokes, etc., to avoid possible drain blockage.
•  Don’t turn off disposer until grinding is completed and only sound of motor and 
water is heard.
• Do not use plumber’s putty on any other disposer connection other than 
sink flange. Do not use thread sealants or pipe dope. These may harm 
disposer and cause property damage.
• Do not operate disposer without Anti-Vibration Tailpipe Mount™ as water  
leaks may result.
NOTICE
ENGLISH
OPERATING INSTRUCTIONS
• Read all instructions before using the appliance.
•  To reduce the risk of injury, close supervision is required when an appliance is 
used near children.
• Do not put fingers or hands into a waste disposer.
•  Turn the power switch to the off position before attempting to clear a jam, 
removing an object from the disposer or pressing reset button.
•  When attempting to loosen a jam in a waste disposer, use the self-service 
wrenchette.
•  When attempting to remove objects from a waste disposer, use long-handled 
tongs or pliers.
•  Do not put the following into a disposer: clam or oyster shells, caustic drain 
cleaners or similar products, glass, china, or plastic, metal (such as bottle 
caps, steel shot, tin cans, or utensils), hot grease or other hot liquids.
•  When not operating a disposer, leave the stopper in place to reduce the risk of 
objects falling into the disposer. 
•  This product is designed to dispose of normal household food waste; inserting 
materials other than food waste into disposer could cause personal injury 
and/or property damage. 
•  To reduce the risk of injury and/or property damage, do not use the sink 
containing the disposer for purposes other than food preparation (such as 
baby bathing or washing hair).
•  Do not dispose of the following in the disposer: paints, solvents, household 
cleaners and chemicals, automotive fluids, plastic wrap.
•  FIRE HAZARD: Do not store flammable items such as rags, paper or aerosol 
cans near disposer. Do not store or use gasoline or other flammable vapors 
and liquids in vicinity of disposer. 
• LEAK HAZARD: Regularly inspect disposer and plumbing fittings for leaks, 
which can cause property damage and could result in personal injury. 
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
PRO 1100XL®
Ultimate Performing Food Waste Disposer/Triturador de Desperdicious de Alimentos de
Máximo Rendimiento/Broyeur de Déchets À Rendement Ultime
The Emerson logo is a trademark and service mark of Emerson Electric Co.
Printed in U.S.A. © 2017 InSinkErator, a business unit of Emerson Electric Co. All Rights Reserved.
10
INSINKERATOR
®
IN-HOME FULL SERVICE LIMITED WARRANTY
This limited warranty is provided by InSinkErator®, a business unit of Emerson Electric Co., 
(“InSinkErator” or “Manufacturer” or “we” or “our” or “us”) to the original consumer owner of the 
InSinkErator product with which this limited warranty is provided (the “InSinkErator Product”), and 
any subsequent owner of the residence in which the Product was originally installed (“Customer”  
or “you” or “your”).
InSinkErator warrants to Customer that your InSinkErator Product will be free from defects in 
materials and workmanship, subject to the exclusions described below, for a period of twelve (12) 
years (the “Warranty Period”), commencing on the later of: (a) the date your InSinkErator Product 
is originally installed, (b) the date of purchase, or (c) the date of manufacture as identified by your 
InSinkErator Product serial number. You will be required to show written documentation supporting 
(a) or (b). If you are unable to provide documentation supporting either (a) or (b), the Warranty 
Period commencement date will be determined by Manufacturer, in its sole and absolute discretion, 
based upon your InSinkErator Product serial number.
What is Covered
This limited warranty covers defects in materials or workmanship, subject to the exclusions below, 
in InSinkErator Products used by a consumer Customer for residential use only, and includes all 
replacement parts and labor costs. YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED 
WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE INSINKERATOR PRODUCT, 
PROVIDED THAT IF WE DETERMINE IN OUR SOLE DISCRETION THAT NEITHER REMEDY IS 
PRACTICABLE, WE MAY PROVIDE YOU A REFUND OF YOUR PURCHASE PRICE OR A CREDIT 
TOWARDS ANOTHER INSINKERATOR PRODUCT.
What is not Covered
This limited warranty does not extend to and expressly excludes:
• Losses or damages or the inability to operate your InSinkErator Product resulting from conditions  
beyond the Manufacturer’s control including, without limitation, accident, alteration, misuse, abuse,  
neglect, negligence (other than Manufacturer’s), failure to install, maintain, assemble, or mount  
the InSinkErator Product in accordance with Manufacturer’s instructions or local electrical and  
plumbing codes.
• Wear and tear expected to occur during the normal course of use, including without limitation,  
cosmetic rust, scratches, dents or comparable and reasonably expected losses or damages. 
In addition to the above exclusions, this limited warranty does not apply to InSinkErator Products 
installed in a commercial or industrial application.
No Other Express Warranty Applies
This limited warranty is the sole and exclusive warranty provided to the Customer identified above. 
No other express warranty, written or verbal, applies. No employee, agent, dealer, or other person is 
authorized to alter this limited warranty or make any other warranty on behalf of Manufacturer. The 
terms of this limited warranty shall not be modified by the Manufacturer, the original owner, or their 
respective successors or assigns.
What we will do to Correct Problems
If your InSinkErator Product does not operate in accordance with the documentation provided to 
you, or you have questions concerning your InSinkErator Product or how to determine when service 
is needed, please call the toll free InSinkErator AnswerLine® at 1 (800) 558-5700, or visit our 
website at www.insinkerator.com. You may also notify us at: InSinkErator Service Center,  
4700 21st Street, Racine, Wisconsin 53406 USA.
The following information must be provided as part of your warranty claim: your name, address, 
phone number, your InSinkErator Product model and serial number, and if necessary, upon request, 
written confirmation of either: (a) the date shown on your installation receipt, or (b) the date shown 
on your purchase receipt.
Manufacturer or its authorized service representative will determine, in its sole and absolute 
discretion, if your InSinkErator Product is covered under this limited warranty. You will be given the 
contact information for your closest authorized InSinkErator Service Center. Please contact your 
InSinkErator Service Center directly to receive in home warranty repair or replacement service. Only 
an authorized InSinkErator service representative may provide warranty service. InSinkErator is 
not responsible for warranty claims arising from work performed on your InSinkErator Product by 
anyone other than an authorized InSinkErator service representative.
If a covered claim is made during the Warranty Period, Manufacturer will, through its authorized 
service representative, either repair or replace your InSinkErator Product. Cost of replacement 
parts or a new InSinkErator Product, and cost of labor for repair or installation of the replacement 
InSinkErator Product are provided at no cost to you. Repair or replacement shall be determined 
by Manufacturer or its authorized service representative in their sole discretion. All repair and 
replacement services will be provided to you at your home. If Manufacturer determines that 
your InSinkErator Product must be replaced rather than repaired, the limited warranty on the 
replacement InSinkErator Product will be limited to the unexpired term remaining in the original 
Warranty Period.
This disposer is covered by Manufacturer’s limited warranty. This limited warranty is void if you 
attempt to repair the InSinkErator Product. For service information, please visit www.insinkerator.com 
or call, toll free, 1-800-558-5700.
Limitation of Liability
TO THE EXTENT PERMITTED BY LAW, IN NO EVENT SHALL MANUFACTURER OR ITS
AUTHORIZED SERVICE REPRESENTATIVES BE LIABLE FOR ANY INCIDENTAL, SPECIAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES, INCLUDING ANY ECONOMIC LOSS, WHETHER
RESULTING FROM NONPERFORMANCE, USE, MISUSE OR INABILITY TO USE THE
INSINKERATOR PRODUCT OR THE MANUFACTURER’S OR ITS AUTHORIZED SERVICE
REPRESENTATIVE’S NEGLIGENCE. MANUFACTURER SHALL NOT BE LIABLE FOR DAMAGES
CAUSED BY DELAY IN PERFORMANCE AND IN NO EVENT, REGARDLESS OF THE FORM OF THE
CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT, INFRINGEMENT, NEGLIGENCE,
STRICT LIABILITY, OTHER TORT OR OTHERWISE), SHALL MANUFACTURER’S LIABILITY TO
YOU EXCEED THE PRICE PAID BY THE ORIGINAL OWNER FOR THE INSINKERATOR PRODUCT.
The term “consequential” damages shall include, but not be limited to, loss of anticipated profits, 
business interruption, loss of use or revenue, cost of capital or loss or damage to property or 
equipment.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the 
above limitation may not apply to you. This limited warranty gives you specific legal rights and you 
may also have other rights which vary from state to state.  
CLEANING DISPOSER
Over time, food particles may accumulate in the grind chamber and baffle. An odor from the disposer is usually a sign of food buildup. To clean disposer:  
1.  Place stopper in sink opening and fill sink halfway with warm water. 
2. Mix 1/4 cup baking soda with water. Turn disposer on and remove stopper from sink at same time to wash away loose particles. 
3. Remove Quiet Collar® Sink Baffle and clean by hand or in dishwasher. Do not operate disposer without Quiet Collar® Sink Baffle in place. 
This disposer is equipped with a Jam-Sensor® Circuit that will prevent jams while grinding virtually any food material. In the unlikely event that the disposer is 
jammed, release it by following these steps:
RELEASING DISPOSER JAM
If motor stops while disposer is operating, disposer may be jammed. To release jam:
1.  Turn off disposer and water.  
2.  Insert one end of self-service Jam-Buster™ Wrench into center hole on bottom of disposer (see Figure A). Work Jam-Buster™ Wrench back and forth until it turns 
one full revolution. Remove Jam-Buster™ Wrench.
3.  Reach into disposer with tongs and remove object(s). Allow disposer motor to cool for 3 - 5 minutes, then lightly push red reset button on disposer bottom  
(see Figure B). (If motor remains inoperative, check service panel for  
tripped circuit breakers or blown fuses.)
USER MAINTENANCE INSTRUCTIONS
Figure A Figure B
RECYCLE YOUR FOOD WASTE: Food waste disposers can provide an environmentally responsible alternative to transporting food waste to landfills.
And they can help reduce greenhouse gas emissions. At capable wastewater treatment plants, food waste can be recycled to produce renewable energy.
Additionally, capable wastewater treatment plants can process food waste into fertilizer. (Check the plant in your area.)
For U.S. www.insinkerator.com/green For Canada www.insinkerator.ca
InSinkErator® may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to
change or discontinue models.
The mounting collar configuration is a trademark of Emerson Electric Co.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

InSinkErator PRO1100XLCORD User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI