Prime-Line KC16HD Operating instructions

Brand
Prime-Line
Model
KC16HD
Type
Operating instructions

Prime-Line KC16HD is a safety door closer designed for easy installation on the hinged side of a door. It features adjustable tension, allowing you to customize the closing force to your preference. The KC16HD also comes with a slide plate to protect your door from marking. With its durable construction and simple operation, this door closer ensures a smooth and controlled closure every time.

Prime-Line KC16HD is a safety door closer designed for easy installation on the hinged side of a door. It features adjustable tension, allowing you to customize the closing force to your preference. The KC16HD also comes with a slide plate to protect your door from marking. With its durable construction and simple operation, this door closer ensures a smooth and controlled closure every time.

KC16HD -INS
NOTE: Installation drawings are typical for this style of replacement part. They may not
show a part identical to the one you are installing.
NOTA: Los dibujos para la instalación son genéricos para repuestos de este tipo; por lo que
podrían no mostrar una pieza idéntica a la que usted esté instalando.
REMARQUE : Les dessins d'installation sont typiques pour ce style de pièce de rechange.
Ils pourraient ne pas illustrer une pièce identique à celle que vous installez.
Safety Door Closer
Cierrapuertas de seguridad
Ferme-porte de sécurité
4-3/4"
11.9 cm
KC16HD -INS
Instructions
1. Fix the closer vertically to jamb on hinged side
of door.
2. To set tension turn the center of the closer
opposite to the arrow.
3. Place arm into nearest hole to door.
4. Fix slide plate into position to protect door.
Tension Adjustment
Turn the centre boss away from the door with the
steel bar supplied and screw the arm into the hole
nearest the door. To increase tension, repeat the
operation one hole at a time. To protect the door
from marking, fix the slide plate supplied into
position.
Once the closer has been properly installed at the
proper tension, fill open holes with
the plugs provided.
Warning: Do not over tension closer. Over ten-
sioning will cause spring to buckle and
the door to slam.
Instrucciones
1. Instale el cierrapuertas en posición vertical en
la jamba del lado de las bisagras.
2. Para regular la tensión, gire el anillo tensor cen
tral del cierrapuertas en dirección contraria a la
flecha.
3. Instale el brazo en el orificio del anillo tensor
más cercano a la puerta.
4. Instale la placa en la puerta para proteger la del
deslisamiento del brazo.
Regulación de la tensión
Gire el anillo tensor insertándole la barrita de
acero provista en uno de sus orificios, gírelo ale-
jándolo de la puerta y enrósquele el brazo en el
orificio más cercano a la puerta. Para aumentar la
tensión, repita la operación un orificio al la vez.
Para proteger la puerta contra marcas por el
brazo del cierrapuertas, instálele la placa provista
en la posición adecuada en la hoja de la puerta.
Una vez lograda la tensión apropiada del cierra-
puertas, instale los tapones provistos en los orifi-
cios restantes.
Advertencia: No tense el cierrapuertas excesiva-
mente porque se forzará el resorte y la puerta cer-
rará de golpe.
Mode d’emploi
1. Visser l’appareil verticalement sur le montant
au côté des charnières de la porte.
2. Pour régler la tension, tourner la partie centrale
de l’appareil en sens inverse de la flèche.
3. Visser le bras dans le trou le plus proche de la
porte.
4. Bien positionner la plaque pour protéger la
porte.
Réglage de la tension
Tournez le bossage central pour l’éloigner de la
porte avec la barre métallique fournie, puis vissez
le bras dans l’orifice le plus rapproché de la porte.
Pour augmenter la tension, répétez, cette opéra-
tion, un orifice à la fois. Afin de protéger la porte
contre les marques, fixez en
position la plaque coulissante fournie. Après l’in-
stallation correcte du ferme-porte avec la tension
appropriée, comblez les orifices en utilisant les
bouchons fournis.
Attention: Ne pas appliquer une tension excessive
sur le ferme-porte. La tension excessive causerait
la déformation du ressort et le claquement de la
porte.
2-3/4"
6.9 cm
4-14"
10.6 cm
5/8" H.C.
16 mm
1"
25 mm
1
2
3
4
26950 San Bernardino Ave., Redlands, CA 92374
© 2010 Prime-Line Products
  • Page 1 1

Prime-Line KC16HD Operating instructions

Brand
Prime-Line
Model
KC16HD
Type
Operating instructions

Prime-Line KC16HD is a safety door closer designed for easy installation on the hinged side of a door. It features adjustable tension, allowing you to customize the closing force to your preference. The KC16HD also comes with a slide plate to protect your door from marking. With its durable construction and simple operation, this door closer ensures a smooth and controlled closure every time.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents