PRIVATE BRAND UNBRANDED MTL8009 User manual

HOW TO CLEAN

YOUR

you will need...

Clean the surface by using warm water and non-abrasive colorfast towel

when necessary to remove dirt and grime.

Always use water when wiping a spill or you may force a potential stain

deeper into the surface.

If the product’s surface is soiled, clean immediately for best results. Wash

the area with clean water. Do not use chemical cleaners on nish. They

may stain or corrode the surface.

If it still doesn’t come o, use a soft bristle brush and lightly scrub it then

wipe it o.

Never use products that contain acids or alkaline as these may damage

the surface.

PLANTER

warm water sponge/cloth soft bristle brush spray bottle