HOW TO CLEAN
YOUR
you will need...
Clean the surface by using warm water and non-abrasive colorfast towel
when necessary to remove dirt and grime.
Always use water when wiping a spill or you may force a potential stain
deeper into the surface.
If the product’s surface is soiled, clean immediately for best results. Wash
the area with clean water. Do not use chemical cleaners on nish. They
may stain or corrode the surface.
If it still doesn’t come o, use a soft bristle brush and lightly scrub it then
wipe it o.
Never use products that contain acids or alkaline as these may damage
the surface.
PLANTER
warm water sponge/cloth soft bristle brush spray bottle
