Hillsdale Furniture 2146-330 Operating instructions

Hillsdale Furniture
Brand
Hillsdale Furniture
Model
2146-330
Type
Operating instructions

This manual is also suitable for

Hillsdale Furniture 2146-330 is a metal bed set that includes a headboard, footboard, side rails, slats, and support legs. The bed is designed for residential use only and requires adult assembly. The bed frame is made of metal and has a powder-coated finish. The headboard and footboard have decorative metal scrollwork. The side rails have pre-drilled holes for easy assembly. The slats are made of wood and provide support for the mattress. The support legs are adjustable and help to level the bed on uneven floors.

Hillsdale Furniture 2146-330 is a metal bed set that includes a headboard, footboard, side rails, slats, and support legs. The bed is designed for residential use only and requires adult assembly. The bed frame is made of metal and has a powder-coated finish. The headboard and footboard have decorative metal scrollwork. The side rails have pre-drilled holes for easy assembly. The slats are made of wood and provide support for the mattress. The support legs are adjustable and help to level the bed on uneven floors.

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required. The product of Hillsdale Furniture,
LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 06-11-2017
Page 1 of 3
Model #103715-110978 (2146-330) Twin
Model #103715-110979 (2146-460) Full
QTYCODE HARDWARE
2
8
4
8
1
1
4
1
2
3
4
5
6
7
M6 x 45mm Socket Bolts
M6 x 16mm Allen Bolts
M6 x 35 Allen Bolts
Flat Washers
M4 Allen Wrench
M5 Allen Wrench
Adjustable Glides
CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
QTYCODE COMPONENTSCOMPONENTS
1A
CODE
B FootboardHeadboard
QTY
1
HDFKC
2C D Footboard PostHeadboard Post
2E Side Rail 1
2
F Side Rail 22
4G H Support LegsSlats 4
• Do not let any sharp objects touch or rub the surface of the product.
• When assembling, do not let children play around the working area.
• Please confirm all parts are correct before starting the assembly process.
• Do not tighten all bolts and screws completely until the enre unit has been assembled and set up.
• Be careful if using power tools as they can over tighten screws and strip threads.
WARNING
E
A
B
C
C
D
D
F
E
F
G
G
G
G
H
H
H
H
Sheffield Metal Bed Set
2
Date: 06-11-2017
Page 2 of 3
CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
STEP 2 - Figure 2
Slide Side Rail 1 (E) into Side Rail 2 (F).
Turn the rails upside down and secure
using 1 Socket Bolt (1). Repeat step for
remaining rails. Tighten bolts with Allen
Wrench (6) provided.
STEP 1 - Figure 1
Begin assembly by attaching Headboard Posts (C)
to Headboard (A) using 2 Allen Bolts (2) and 2
Flat Washers (4) per side. Tighten bolts using
Allen Wrench (5) provided. Repeat step to attach
Footboard Posts (D) to Footboard (B).
E
C
2
4
4
C
A
B
D
D
FIGURE 1
A
C
F
1
FIGURE 2
Model #103715-110978 (2146-330) Twin
Model #103715-110979 (2146-460) Full
Sheffield Metal Bed Set
E
C
C
D
D
F
E
F
G
G
G
G
H
H
H
H
7
STEP 3 - Figure 3
Turn Side Rail 1 (E) right side up and
insert firmly into slot on Headboard
Post (C). For the other side, insert
Side Rail 2 (F) into slot on
Headboard Post (C). Take remaining
ends of Side Rails (E & F) and insert
into slots on Footboard Posts (D).
STEP 4 - Figure 4
Insert Adjustable Glides (7) into
bottoms of Support Legs (H).
STEP 5 - Figure 5
Insert 2 Slats (G) into slots on
Side Rails (E & F) attached to
Headboard Posts (C). Repeat step to
insert remaining 2 Slats (G) into
Side Rails (E & F) attached to
Footboard Posts (D).
STEP 6 - Figure 6
Secure Support Legs (H) to Slats (G)
using 1 Allen Bolt (3) per slat.
Tighten bolts with Allen Wrench (5)
provided. The assembly is now
complete.
Date: 06-11-2017
Page 3 of 3
CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
F
F
FIGURE 3
E
E
E
C
C
C
D
D
FIGURE 4
H
3
H
FIGURE 5
FIGURE 6
G
E
G
Model #103715-110978 (2146-330) Twin
Model #103715-110979 (2146-460) Full
Sheffield Metal Bed Set
  • Page 1 1
  • Page 2 2
  • Page 3 3

Hillsdale Furniture 2146-330 Operating instructions

Hillsdale Furniture
Brand
Hillsdale Furniture
Model
2146-330
Type
Operating instructions
This manual is also suitable for

Hillsdale Furniture 2146-330 is a metal bed set that includes a headboard, footboard, side rails, slats, and support legs. The bed is designed for residential use only and requires adult assembly. The bed frame is made of metal and has a powder-coated finish. The headboard and footboard have decorative metal scrollwork. The side rails have pre-drilled holes for easy assembly. The slats are made of wood and provide support for the mattress. The support legs are adjustable and help to level the bed on uneven floors.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents