BenQ G2420HD User manual

Brand: BenQ

Model: G2420HD

Category: TVs & monitors

Type: User manual

This manual is also suitable for

Welcome

G2411HD

24" Wide-Screen LCD Monitor

User Manual

reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language

or computer language, in any form or by any means, electronic, mechanical, magnetic, optical,

chemical, manual or otherwise, without the prior written permission of BenQ Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with

respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness

for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication

and to make changes from time to time in the contents hereof without obligation of BenQ

Corporation to notify any person of such revision or changes.

Please follow these safety instructions for best performance,

and long life for your monitor

Power Safety

• The AC plug isolates this equipment from the AC supply.

• The power supply cord serves as a power disconnect device for pluggable equipment. The

socket outlet should be installed near the equipment and be easily accessible.

• This product should be operated from the type of power indicated on the marked label. If you

are not sure of the type of power available, consult your dealer or local power company.

Care And Cleaning

• Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD

monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass

cleaners.

• Slots and openings on the back or top of the cabinet are for ventilation. They must not be

blocked or covered. Your monitor should never be placed near or over a radiator or heat

source, or in a built-in installation unless proper ventilation is provided.

• Never push objects or spill liquid of any kind into this product.

Servicing

• Do not attempt to service this product yourself, as opening or removing covers may expose

you to dangerous voltages or other risks. If any of the above mentioned misuse or other

accident such as dropping or mishandling occurs, contact qualified service personnel for

servicing.

Table of Contents 3

Table of Contents

Getting started ...................................................................................................................... 4

Getting to know your monitor ............................................................................................ 6

Front view ....................................................................................................................6

Back view .....................................................................................................................6

How to assemble your monitor hardware ........................................................................... 7

How to detach the stand base ...................................................................................10

Getting the most from your BenQ monitor ...................................................................... 11

How to install the monitor on a new computer ......................................................12

How to upgrade the monitor on an existing computer ..........................................13

How to install on Windows Vista systems ...............................................................14

How to install on Windows XP system ....................................................................15

Picture optimization ...........................................................................................................16

How to adjust your monitor ..............................................................................................17

The control panel ......................................................................................................17

Hot key mode ............................................................................................................18

Main menu mode ......................................................................................................19

Troubleshooting ................................................................................................................. 29

Frequently asked questions (FAQ) ...........................................................................29

Need more help? ........................................................................................................30

4 Getting started

1. Getting started

When unpacking please check you have the following items. If any are missing or damaged, please

contact the place of purchase for a replacement.

BenQ LCD Monitor

Monitor Base

Quick Start Guide

CD-ROM

Power Cord

(Picture may differ from product

supplied for your region)

Signal Cable: D-Sub

5 Getting started

Consider keeping the box and packaging in storage for use in the future when you may need to transport

the monitor. The fitted foam packing is ideal for protecting the monitor during transport.

Signal Cable: DVI-D (optional)

Signal Cable: HDMI (optional)

6 Getting to know your monitor

2. Getting to know your monitor

Front view

Back view

1. AC power input jack

2. HDMI input socket

3. DVI-D input socket

4. D-Sub input socket

Earphone socket

7 How to assemble your monitor hardware

3. How to assemble your monitor hardware

If the computer is turned on you must turn it off before continuing.

Do not plug-in or turn-on the power to the monitor until instructed to do so.

1. Attach the monitor base.

Please be careful to prevent damage to the monitor.

Placing the screen surface on an object like a stapler or a

mouse will crack the glass or damage the LCD substrate

voiding your warranty. Sliding or scraping the monitor

around on your desk will scratch or damage the monitor

surround and controls.

Protect the monitor and screen by clearing a flat open area

on your desk and placing a soft item like the monitor

packaging bag on the desk for padding.

Gently lay the screen face down on a flat clean padded

surface.

While holding the monitor firmly against the desk, pull

the monitor stand arm upwards clear of the monitor.

Orient and align the stand base socket with the end of the

stand arm, then push them together until they click and

lock into place.

Gently attempt to pull them back apart to check that they

have properly engaged.

Carefully lift the monitor, turn it over and place it upright

on its stand on a flat even surface.

You should position the monitor and angle the screen to

minimize unwanted reflections from other light sources.

8 How to assemble your monitor hardware

2. Connect the PC video cable.

Do not use both DVI-D cable and D-Sub cable on the

same PC. The only case in which both cables can be

used is if they are connected to two different PCs with

appropriate video systems.

Connect one end of the DVI-D cable to the monitor

DVI-D socket and the other end to the DVI-D port on

your computer. (optional)

The DVI-D format is used for direct digital connection

between source video and digital LCD monitors or

projectors. The digital video signals produce a superior

quality picture than analog video signals.

Connect the plug of the D-Sub cable (at the end without

the ferrite filter) to the monitor D-Sub socket. Connect the

other plug of the D-Sub cable (at the end with the ferrite

filter) to the computer video D-Sub socket.

Connect the plug of the HDMI cable to the monitor video

socket. Connect the other end of the cable to the computer

video socket. (optional)

Tighten all finger screws to prevent the plugs from acci-

dently falling out during use.

Either

3. Connect the power cable to the monitor.

Plug one end of the power cord into the socket labelled

‘POWER IN’ on the rear of the monitor. Do not connect

the other end to a power outlet just yet.

9 How to assemble your monitor hardware

4. Route the cables via the cable clip.

Release the cable retaining clip by squeezing the clip

inwards as illustrated. Position the cables together and

reinsert the clip over them to retain the cables neatly in

place behind the monitor stand.

5. Connect-to and turn-on the power.

Plug the other end of the power cord into a power outlet

and turn it on.

Picture may differ from product supplied for your region.

Turn on the monitor by pressing the power key.

Turn on the computer too, and follow the instructions in

Section 4:

Getting the most from your BenQ monitor

on page 11

to install the monitor software.

10 How to assemble your monitor hardware

How to detach the stand base

1. Prepare the monitor and area.

Turn off the monitor and the power before unplugging the

power cable. Turn off the computer before unplugging the

monitor signal cable.

Please be careful to prevent damage to the monitor.

Placing the screen surface on an object like a stapler or a

mouse will crack the glass or damage the LCD substrate

voiding your warranty. Sliding or scraping the monitor

around on your desk will scratch or damage the monitor

surround and controls.

Protect the monitor and screen by clearing a flat open area

on your desk and placing a soft item like a towel on the

desk for padding, before laying the screen face down on a

flat clean padded surface.

2. Press the locking clips to detach the monitor base

from the monitor stand arm.

11 Getting the most from your BenQ monitor

4. Getting the most from your BenQ monitor

To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install

the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor CD-ROM.

The circumstances under which you connect and install your BenQ LCD Monitor will determine

which process you need to follow to successfully install the BenQ LCD Monitor driver software.

These circumstances relate to which version of Microsoft Windows you are using, and whether

you are connecting the monitor and installing the software onto a new computer (without existing

monitor driver software), or whether you are upgrading an existing installation (which already has

existing monitor driver software) with a newer monitor.

In either case however, the very next time you turn on your computer (after connecting the

monitor to your computer), Windows will automatically recognise the new (or different)

hardware, and will launch its Found New Hardware wizard.

Follow the wizard instructions until it asks you to select a monitor model. At that point, click the

Have Disk button, insert the BenQ LCD Monitor CD-ROM and select the appropriate monitor

model. Further details and step-by-step instructions for both an automatic (new) or upgrade

(existing) installation follow. See:

• How to install the monitor on a new computer on page 12.

• How to upgrade the monitor on an existing computer on page 13

If you require a User Name and Password to login to your Windows computer, you must be logged on as

an Administrator or as a member of the Administrators group in order to install the monitor driver software.

Furthermore, if your computer is connected to a network which has security access requirements, network

policy settings may prevent you from installing software on your computer.

12 Getting the most from your BenQ monitor

How to install the monitor on a new computer

This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver

software on a new computer which has never had a monitor driver installed before. This

instruction is only suitable for a computer which has never been used before, and for which the

BenQ LCD Monitor is the first ever monitor to be connected to it.

If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor

connected to it (and has monitor driver software installed), you should not be following these instructions.

You should instead be following the instructions for How to upgrade the monitor on an existing computer.

1. Follow the instructions in How to assemble your monitor hardware on page 7.

When Windows starts, it will automatically detect the new monitor and launch the Found New Hard-

ware Wizard. Follow the prompts until it displays the option to Install Hardware Device drivers.

2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.

3. Check Search for a suitable driver for my device option, and click Next.

4. Check the option for CD-ROM drives (uncheck all others) and click Next.

5. Look to confirm that the wizard has selected the correct name of your monitor and click

Next.

6. Click Finish.

7. Restart the computer.

13 Getting the most from your BenQ monitor

How to upgrade the monitor on an existing computer

This instruction details the procedure for manually updating the existing monitor driver software

on your Microsoft Windows computer. It is currently tested as compatible for Windows XP and

Windows Vista Operating System (OS).

The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows,

however, as at the time of writing, BenQ has done no testing of this driver on other versions of Windows

and cannot guarantee its operation on those systems.

Installing monitor driver software involves selecting an appropriate information file (.inf) on the

BenQ LCD Monitor CD-ROM for the particular model monitor you have connected, and letting

Windows install the corresponding driver files from the CD. You need only steer it in the right

direction. Windows has an Upgrade Device Driver Wizard to automate the task and guide you

through the file selection and installation process.

See:

• How to install on Windows Vista systems on page 14.

• How to install on Windows XP system on page 15.

14 Getting the most from your BenQ monitor

How to install on Windows Vista systems

1. Open Display Settings.

Right-click the desktop and select Personalize from the popup menu.

Select Display Settings from the Personalize appearance and sounds window.

The Display Settings window will display.

2. Click the Advanced Settings button.

The Generic PnP Monitor Properties window will display.

3. Click the Monitor tab and the Properties button.

4. Click Continue in the prompted User Account Control window.

5. Click the Driver tab and the Update Driver button.

6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.

7. In the Update Driver Software window, select the option ‘Browse my computer for driver

software’.

8. Click ‘Browse’ and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is the

drive letter designator for the CD-ROM drive).

The drive letter for your CD drive may differ from the example above depending upon your system – it may

be ‘D:’ or ‘E:’ or ‘F:’ etc.

9. Select the correct folder name of your monitor from provided driver list, and click Next.

This will copy and install the appropriate monitor driver files to your computer.

10. Click Close.

You do not need to restart Windows Vista, as the BenQ LCD monitor drivers will operate immediately

with no further action required by you.

15 Getting the most from your BenQ monitor

How to install on Windows XP system

1. Open Display Properties.

The quickest shortcut to Display Properties is through the Windows desktop.

Right-click the desktop and select Properties from the popup menu.

Alternatively, the Windows menu to Display Properties is located in Control Panel.

In Windows XP version, Control Panel is located directly under the main Start menu item.

The menu options displayed will depend upon which type of view is selected for your system.

• Under the Classic view, click Start | Control Panel | Display.

• Under the Category view, click Start | Control Panel | Appearance and Themes | Change the

screen resolution.

The Display Properties window will display.

2. Click the Settings tab and the Advanced button.

The Advanced Display Properties window will display.

3. Click the Monitor tab and select the ‘Plug and Play Monitor’ from the list.

If there is only one monitor in the list, it will already be selected for you.

4. Click the Properties button.

The Monitor Properties window will display.

If the driver provider is listed as BenQ, and the model matches that of your new monitor, the proper

drivers are already installed, and you need do nothing further. Cancel out of these property windows.

However, if BenQ is not listed as the manufacturer, or the correct model is not currently shown, you

will need to continue with these instructions.

5. Click the Driver tab and the Update Driver button.

The Hardware Update Wizard will display. Follow the wizard instructions noting the steps below:

6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer you attached the

monitor to.

7. Check the option ‘Install from a list or specific location’ and click Next.

8. Check the option ‘Search for the best driver in these locations’ and also check ‘Search

removable media’, then click Next.

Please wait while the wizard searches for drives and the BenQ LCD Monitor CD inserted in step 6.

When completes, the wizard should have found and selected the BenQ driver on the CD appropriate to

your monitor model.

9. Select (single-click) the correct name of your monitor from provided driver list on the CD,

and click the Next button.

This will copy and install the appropriate monitor driver files to your computer.

10. Click Finish.

This will close the wizard and return you to the Monitor Properties window.

11. Click Close, OK, and OK.

This will close the Display Properties windows. You do not need to restart Windows XP, as the BenQ

LCD monitor drivers will operate immediately with no further action required by you.

16 Picture optimization

5. Picture optimization

The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the AUTO key

function. Press the AUTO

key to optimize the currently displayed image to the screen.

When you connect a digital video output using a digital (DVI or HDMI) cable to your monitor, the AUTO key

and the Auto Adjustment function will be disabled, because the monitor will automatically display the best

image.

Please ensure that the connected graphic card on your computer is set to the native resolution of the

monitor when you use the AUTO key function.

If you wish, you can always adjust the screen geometric settings manually using geometry menu

items. To assist you in this endeavour, BenQ has provided a screen test image utility which you can

use to check for screen color, grayscale and line gradient display.

1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as

the desktop of your operating system. However, we recommend that you use auto.exe. As you

run auto.exe, a test pattern displays.

2. Press the AUTO key on the monitor.

3. Press the MENU key to access the monitor On-Screen Display (OSD) menu.

4. Use the W or X keys to select DISPLAY and press the ENTER key to enter the menu.

5. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), press the W

or X keys to select Pixel Clock and press the ENTER key. Then press the W or X keys to

adjust the monitor until the noise disappears.

6. If you notice a horizontal noise, press the W or X keys to select Phase and press the ENTER

key. Then press the W or X keys to adjust the monitor until the noise disappears.

17 How to adjust your monitor

6. How to adjust your monitor

The control panel

1. “AUTO”: Adjust vertical position, phase, horizontal position and pixel clock automatically.

2. “MENU” key: Activate OSD main menu and return to the previous menu or exit OSD.

3. W /Mode key: For Left/Decrease adjustment. The key is the hot key for Mode.

4. X /Contrast/Brightness key: For Right/Increase adjustment. The key is the hot key for

Brightness and Contrast.

5. “ENTER” key: Enter sub menus and select items. This key is also the hot key for Input.

6. “Power”: Turn the power on or off.

OSD = On Screen Display.

The hot-keys will display a graduated scale for adjusting the value of that setting, and will only operate

while the OSD menu is not currently displaying. Hot-key displays will disappear after a few seconds of no

key activity. See Hot key mode on page 18.

18 How to adjust your monitor

Hot key mode

The monitor keys perform as hotkeys to provide direct access to particular functions whenever the

menu isn't currently displaying on-screen.

Brightness and Contrast hot keys

Mode hot key

Input hot key

Press the X key to display the Brightness

and Contrast indicators. Further press the

the W or X keys, then the ENTER key to

select Brightness or Contrast. The X key

will increase the level, while the W key will

decrease the level.

To exit, press the MENU key.

Press the W key continually to switch

between the 5 modes for the main window,

including Standard, Movie, Dynamics,

Photo, and sRGB. The setting will take effect

immediately.

BenQ G2420HD User manual

Brand: BenQ

Model: G2420HD

Category: TVs & monitors

Type: User manual

This manual is also suitable for

Download PDF

report

BenQ G2420HD User manual

This manual is also suitable for

BenQ G2420HD User manual

Related papers