Toro Agricultural Tire, Left Hand, Dingo Compact Utility Loader Installation guide

Type
Installation guide
The T
oro Company – 1998
Printed in USA
All Rights Reserved
FORM NO. 3321-699
INSTALLATION
INSTRUCTIONS
Models
22458 (Right) and 22461 (Left)
Right and Left Agricultural Wheels
for Dingo 222 Traction Units, Models 22304 and 22303
Loose
Parts
DESCRIPTION QTY. USE
Spacers
Wheel
2
1
Install
on traction unit
W
arranty Registration Card
Installation Instructions
Parts Catalog
1
1
1
Read before use
Installation
Note: The right and left sides of the traction
unit are determined when standing in
the operators position. Ensure that
you install only right hand agricultural
wheels on the right side of the traction
unit and left hand agricultural wheels
on the left side. This will ensure that
the tread on the tires point in the
correct direction (Fig. 1).
1. Put the traction unit up on blocks and remove
the wheel to be replaced.
2. Slide the (2) wheel spacers onto the studs on the
wheel hub (Fig. 1).
3. Install the wheel and secure it with lug nuts
(Fig. 1). Torque the lug nuts to 45 to 55 ft–lbs
(61 to 74 N·m).
m–3955
2
1
4
3
5
Figure 1
1. Wheel
spacers
2.
Wheel hub
3.
Lug nut
4. Wheel
5. T
o front
4. Return the traction unit to the ground.
  • Page 1 1

Toro Agricultural Tire, Left Hand, Dingo Compact Utility Loader Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI