Whitehaus Collection WHS1644-SK-BSS Installation guide
- Category
- Sanitary ware
- Type
- Installation guide
1
2
3
3
/
4
10
1
/
2
27
1
/
4
8
1
/
2
4
1
/
2
6
8
1
/
2
2
1
1
/
2
Connect the flexible hoses to the
water supply valves (left to hot
water and right to cold). Make
sure flexible hoses are securely
fastened before turning on valve.
Installation Guide
WHS1644SK
ushed and cleared to avoid blockage.
s are properly
required.
Clean all dirt and debris
from supply valves before
proceeding with installation. If
you are replacing an existing
faucet, remove the faucet
from the sink and clean the
surface thoroughly.
1. Clean the faucet with mild soap and water, then wipe the faucet dry with soft cloths.
2. Do not use cleaners which contain acids, harsh chemicals, or abrasives.
3. Repeat steps 1-2 whenever necessary.
1. Always turn off water and relieve pressure before working on your faucet.
WAT RHAUS
-
1
Whitehaus Collection WHS1644-SK-BSS Installation guide
- Category
- Sanitary ware
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
