Allied Brass 404D-8BB-PC Installation guide

Type
Installation guide
8.00 "
2x 9/16" (Hole in Door)
GLASS DOOR
DOOR PULL
GLASS DOOR
Back Plate
10-24 Hex Nut
Plastic Washer
Clear Vinyl Bushing
10-24 Screw
Mounting Lug
Step 1:
Determine your desired location for installation and make 2 marks for the location for mounting.. Drill Ø9/16" hole at each of
the marks.
Drill Ø9/16" Holes into Glass Door
Mount Door Pull to Door as below.
Step 2:
Shower Door Pull Mounting
404D-8BB
INSTALLATION INSTRUCTIONS
No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.
  • Page 1 1

Allied Brass 404D-8BB-PC Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI