Command 01BFR Installation guide

Brand
Command
Model
01BFR
Type
Installation guide

This manual is also suitable for

D
AM
AG
E
-
F
REE
WA
LL
T
ILE
S
RISER INSTRUCTIONS
Caution: Do not hang over beds, on wallpaper or
on ceilings. Apply and use between 50°-105° F.
Wait 7 days after painting before applying
Command Décor to wall.
Failure to follow instructions carefully may
cause damage.
Avoid the use of all purpose cleaners, citric
acid, disinfecting or solvent based cleaners
which may damage the product.
Distributed By:
3M Construction and Home
Improvement Markets Division
3M Center
St. Paul, MN 55144–1000
1-800-934-7355
command.com
Front, base and strips made in the USA with
globally sourced materials. Riser made in
Mexico.
3M and Command are trademarks of 3M.
© 2015 3M. All rights reserved.
34-8716-7377-7
to your Command
TM
Decor with a riser!
ADD DIMENSION
CLICK!
step 1: apply riser
Add the riser to the back of the
base. The magnetic attachment
will hold the base in place.
step 2: press riser onto strip
Position the riser over the strip on
the wall. Press against the center of
the base until you hear it lock into
the strip.
  • Page 1 1
  • Page 2 2

Command 01BFR Installation guide

Brand
Command
Model
01BFR
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents