4009/6009 Grounding Clip
INSTALLATION INSTRUCTIONS
Installation Instruction No.: 42604 – January 2004
Wiremold Electrical Systems conform to and should be installed
and properly grounded in compliance with requirements of the
current National Electrical Code, Canadian Electrical Code or codes
administered by local authorities.
All electrical products may represent possible shock or fire hazard
if improperly installed or used. Wiremold electrical products are
UL Listed to U.S. and Canadian safety standards, made for interior
use only, and should beinstalled in conformance with current local
and/or the National Electrical Code.
WIREMOLD
4000 Series
(shown below)
6000 Series
© Copyright 2004 The Wiremold Company All Rights Reserved
4009/6009 Grounding Clip
INSTALLATION INSTRUCTIONS
Installation Instruction No.: 42604 – January 2004
Wiremold Electrical Systems conform to and should be installed
and properly grounded in compliance with requirements of the
current National Electrical Code, Canadian Electrical Code or codes
administered by local authorities.
All electrical products may represent possible shock or fire hazard
if improperly installed or used. Wiremold electrical products are
UL Listed to U.S. and Canadian safety standards, made for interior
use only, and should beinstalled in conformance with current local
and/or the National Electrical Code.
WIREMOLD
4000 Series
(shown below)
6000 Series
© Copyright 2004 The Wiremold Company All Rights Reserved
-
1
Legrand 4000 & 6000 Series Grounding Clip - 4009, 6009 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Legrand 5500 Series Large Capacity Raceway Device Installation guide
-
-
-
-
-
-
-
-
Legrand G4050 Installation guide
-
Legrand V4010DFO Installation guide