BN68-08194Y-02
Reverse Side
1 Connects to MDC using an RS232C adapter.
2 Outputs sound to an audio device via an audio cable.
3 Connect to a USB memory device.
4 - Wired LAN connection port used to connect an external device
such as a laptop to connect to the Internet.
- Connects to MDC using a LAN cable.
5 - Sends the HDMI signal to a connected LAN cable using an
HDBaseT transmitter.
- Connects to MDC using a LAN cable.
6
Connects to a source device using a HDMI cable or HDMI-DVI cable.
Issues Solutions
The screen keeps
switching on and off.
Check the cable connection between
the product and PC, and ensure the
connection is secure.
No Signal is displayed
on the screen.
Check that the product is connected
correctly with a cable.
Check that the device connected to the
product is powered on.
Not Optimum Mode is
displayed.
This message is displayed when a
signal from the graphics card exceeds
the product’s maximum resolution and
frequency.
Refer to the Standard Signal Mode Table
and set the maximum resolution and
frequency according to the product
specifications.
The images on the
screen look distorted.
Check the cable connection to the
product.
The screen appears
unstable and shaky.
Check that the resolution and frequency
of the PC and graphics card are set within
a range compatible with the product.
Then, change the screen settings if
required by referring to the Additional
Information on the product menu and the
Standard Signal Mode Table.
There are shadows or
ghost images left on
the screen.
There is no image on
the screen and the
power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the
mouse to return to the previous screen.
Issues Solutions
Picture quality of the
product is different
from the dealer
shop where it was
purchased.
Use an HDMI cable to obtain high-
definition (HD) picture quality.
The remote control
does not work.
Make sure that the batteries are correctly
in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon
signs switched on in the vicinity.
A beeping sound is
heard when my PC is
booting.
If a beeping sound is heard when your PC
is booting, have your PC serviced.
The product smells
like plastic.
The plastic smell is normal and
disappears over time.
Small particles are
found on the edges of
the product.
The particles are part of the product
design. The product is not defective.
When I try to change
the PC resolution, a
message The
defined resolution
is not supported.
appears.
The message The defined resolution
is not supported. appears if the input
source resolution exceeds the maximum
resolution of the display.
To resolve the issue, change the PC
resolution to a resolution supported on
the display.
Troubleshooting Guide
Checking the Components
Parts
Contact the vendor where you purchased the product if any
components are missing.
The pictures may look different from the actual components.
1 Remote sensor
Press a button on the remote control pointing at the sensor on
the front of the product to perform the corresponding function.
-
Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
QUICK SETUP GUIDE
Warranty card
(Not available in some locations)
Power cord
Batteries
(Not available in some
locations)
Remote Control
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.
The colour and the appearance may differ depending on the product, and the
Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
OH46F OH55F
QUICK SETUP GUIDE
POWER
BN68-08194Y-02_QSG_OHF 46-55_INDIA_ENG.indd 1 2019-06-28 오후 2:56:49
Specifications
Model Name OH46F OH55F
Panel
Size 116 cm 138 cm
Display area 1018.08 mm (H) x 572.67 mm (V) 1209.6 mm (H) x 680.4 mm (V)
Power Supply
AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental
considerations
Operating
Storage
- This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to
take adequate measures.
- For detailed device specifications, visit the Samsung Electronics website.
- The PVC Free (except for accessory cables) logo is the self-declared trademark of Samsung.
* Accessory cables: signal cables and power cords
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Tel. 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)
http://www.samsung.com/in/support
Connecting to a PC
Connecting to MDC
Warning! Important Safety Instructions
(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED
PERSONNEL.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
This symbol indicates that this product has included
important literature concerning operation and
maintenance.
This product is RoHS compliant.
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent
possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers
- 1800 40 SAMSUNG(1800 40 7267864) (Toll-Free)
» If your equipment uses an AC adapter:
- Only use the AC adapter with your product by
Samsung.
- Do not use the power cord with other products.
» Do not install this equipment in a confined space such as a case
or similar.
» The slots and openings in the cabinet and in the back or bottom
are provided for necessary ventilation. The slots and openings
must never be blocked or covered.
» The product should be located away from heat sources such as
radiators, heat registers, or other products that produce heat.
» The apparatus must be connected to an earthed MAINS socket-
outlet (Class l Equipment only). Or Use only a properly grounded
plug and receptacle (Class l Equipment only).
» To disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug shall
be readily operable.
» As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this
unit by POWER.
Connecting to a Video Device
Connecting the HDBase-T
Connecting to an Audio System
Connecting to an Audio System
For details on how to use the MDC programme, refer to
Help after installing the programme.
The MDC programme is available on the website.
- Use Cat7(*STP Type) cable for the connection. (10/100 Mbps)
*Shielded Twist Pair
HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/MAGICINFO IN
DBJ, DCJ: DVI/HDMI/AUDIO IN
HDMI IN 1, HDMI IN 2
DCJ: DVI/MAGICINFO IN
DCJ: DVI/HDMI/AUDIO IN
HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/MAGICINFO IN
DBJ, DCJ: DVI/HDMI/AUDIO IN
HDMI IN 1, HDMI IN 2
DCJ: DVI/MAGICINFO IN
DCJ: DVI/HDMI/AUDIO IN
HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/MAGICINFO IN
DBJ, DCJ: DVI/HDMI/AUDIO IN
HDMI IN 1, HDMI IN 2
DCJ: DVI/MAGICINFO IN
DCJ: DVI/HDMI/AUDIO IN
HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/MAGICINFO IN
DBJ, DCJ: DVI/HDMI/AUDIO IN
HDMI IN 1, HDMI IN 2
DCJ: DVI/MAGICINFO IN
DCJ: DVI/HDMI/AUDIO IN
RS232C OUT
RJ45 (LAN OUT)
RJ45 (LAN OUT)
HUB
RS232C IN
RS232C OUT
RS232C OUT
RJ45 (LAN OUT)
RJ45 (LAN OUT)
HUB
RS232C IN
RS232C OUT
RS232C OUT
RJ45 (LAN OUT)
RJ45 (LAN OUT)
HUB
RS232C IN
RS232C OUT
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/HDMI/AUDIO IN
AUDIO OUT
DCJ: AV/COMPONENT IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: AV/COMPONENT IN
HDBase-T (Tx)
HDMI OUT
HDMI OUT
HDMI OUT
HDBT (LAN IN)
LAN HDMI IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/HDMI/AUDIO IN
HDBT (LAN IN)
DCJ: AV/COMPONENT IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: AV/COMPONENT IN
Connecting the LAN Cable
LAN Cable
BN68-08194Y-02_QSG_OHF 46-55_INDIA_ENG.indd 2 2019-06-28 오후 2:56:52
-
1
-
2
Samsung OH55F Quick start guide
- Type
- Quick start guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Samsung OH75F Quick setup guide
-
-
Samsung OH46F Quick start guide
-
Samsung DB43J Quick start guide
-
Samsung QM98F Quick start guide
-
Samsung QM75F Quick start guide
-
Samsung QB13R-T Quick start guide
-
Samsung DC49H User manual
-
Samsung DC43J Quick start guide
-
Samsung SH37F Quick setup guide