BORETTI VP64 IXBE LINEA PRINCIPALE Owner's manual

Category
Ovens
Type
Owner's manual
User Manual
NL
FR
DE
EN
75
NL
FR
DE
EN
FOREWORD
Congratulations! You are now the official owner of a Boretti range cooker. In the
coming years, you will discover the absolute joy of cooking with a Boretti range
cooker.
In designing your Boretti range cooker, we have kept you, the cook, in mind at all
times. This is why you are not holding a user guide the size of a telephone directory
in your hands, but a very clear and concise manual. Your range cooker is the same
way. That is to say, easy to use and convenient.
We recommend that you read this manual carefully before using your Boretti range
cooker in order to avoid problems.
If you have any questions about this product after reading the manual or when using
your Boretti, we will be happy to hear from you.
We wish you lots of cooking pleasure!
Boretti
76
Contents
Foreword
For the Installer 77
– General Installation Instructions
– Electrical Connection
– Gas Connection
Before First Use 79
– Safety Instructions
– Environmental Regulations
– Cleaning Before First Use
Operating the Programmable LCD Clock 81
– Setting the Correct Time
– Manual Function
– Adjusting the Audio Signal
– The Timer
– Pre–Programmed Baking
Operating the Gas Oven Programmable LCD Clock 83
– Setting the Correct Time
– Setting the Timer
– Adjusting the Audio Signal
Operating the Programmable Analog Clock 84
– Setting the Correct Time
– Manual Function
– Timer with Automatic Countdown
– Pre–Programmed Baking
Instructions for Oven Use 85
– Descriptions of the Various Oven Functions
– Quick–Start Function
– Grill (oven)
– Using the Rotisserie
– Casing Cooling
– Dismantling the Oven Door
– Dismantling the Oven Glass Panel
– Removing the Inside Panels from the Oven
– Cleaning the Oven Cavity(s)
– Using the Built–In Thermometer
– Pizza Pan
Using a Ventilated gas Oven 89
– Igniting the Gas Oven
– Gas Oven Grill
– Gas Oven Fan
The Cooktop 91
– General Information Gas Burners
– Wok Burner
– Fry Top
– Cleaning the Fry Top
– Coupe de Feu
– Adjusting the Gas Burners
– Cast Iron Grill Plate
– Cleaning the Cooktop
– Ceramic Cooktop
– The induction cooker
Technical Details 95
– Table for Built–In Thermometer
– Troubleshooting
– Installation Diagrams
– Power and Values
77
NL
FR
DE
EN
For the Installer
General Installation Instructions
Your Boretti must be installed by a qualified
technician according to legal/locally applicable
codes and ordinances.
Before you start installation or reparation work,
make sure that the range cooker is not connected
to the power source.
Your Boretti can be installed against a wall that is
higher than the counter, such as a tall appliance
cabinet or a closed wall, at a distance of at least
50 mm from the side of the range cooker. There
must be at least 650 mm of space between the
cooktop and any shelf or hood placed above it.
Your Boretti range cooker has a standard height
of approximately 91 cm. If your Boretti has been
fitted with round adjustable legs, you can also
purchase these in a taller version. The range
cooker can then be adjusted to a height between
91 and 97 cm. It is recommended to align the
cooktop with the top of the counter. We also re-
commend that the range cooker be perfectly level
in order to ensure proper functioning.
The strip with ventilation slots included with your
range cooker is only mandatory for use with a
ventilated gas oven, and only when it is closed off
on the upper–back side by tiles or a wall. You do
not need to use these for a model with a regular
electric oven; that range cooker can be placed
directly against a back wall or tiles.
In order to ensure proper functioning, we advise
you to use your range cooker in a well–ventilated
area. This is especially important for range coo-
kers that are connected to bottled gas (butane/
propane). Butane/propane (bottled gas) is heavier
than air. As a result, the gas will sink low to the
ground (only in case of leakage). Therefore, there
must be sufficient ventilation to disperse gas at
ground level. Under no circumstances may the
gas bottles be placed below the living area (base-
ment/crawl space). This also applies to empty or
half–empty gas bottles.
Electrical Connection
Check whether voltage and capacity agree with
the features mentioned on your Boretti’s type
plate. Under no circumstances may this plate be
removed. The fuses and home mains voltage in-
stallation must comply with the range cooker’s
requirements. The connection to the electrical
supply may be either fixed, or a plug and socket.
In the latter case, the plug and socket outlet must
comply with applicable regulations. The connec-
tion must be grounded, regardless of type. Befo-
re connecting, make sure the electricity source is
properly grounded. Avoid use of reducers, adap-
tors, extension cables or by–passes.
Caution:
See Page 98 for the correct installation diagrams.
All six screws must always be well tightened.
78
Boretti is not liable for damage to persons or
objects as a result of non–compliance or partial
compliance with the instructions listed above, or
as a result of modifications made to the range
cooker.
Caution: All range cookers are factory delivered
with a mono–phase connection in the connection
block at the back of the range cooker. If connec-
tion is made to multiple phases, you must comply
with (local) codes and ordinances.
Gas Connection
The connection with a rubber tube that complies
with applicable regulations must be made in such
a way that the length of the tube is not more than
1.5 meters; make sure the tube does not touch
moving parts, or has a kink. Before using the
range cooker, always check whether the following
requirements have been met:
it must be possible to inspect the supply line
along its entire length (max. 1.5 m).
the supply line must not be subject to tensile
forces or make sharp turns.
the supply line must not touch sharp objects
or corners.
the supply line must not touch walls heated to
more than 50°C at any point.
Caution: After connecting your Boretti, use soap
suds to check for leaks. Never do this with a
flame.
Caution: A gas tube has a limited lifespan. Make
sure you replace it with a new one in a timely fa-
shion.
Boretti recommends connecting your range coo-
ker with a flexible metal GIVEG tube which can be
purchased from Boretti. The maximum length of
these tubes is 1 meter and they have an unlimited
lifespan.
Caution: If your Boretti is connected to mains gas
using a fixed (copper) line, you must always use a
fiber gasket (Figure 1).
Caution: For range cookers placed in Belgium the
optional Boretti gas line cannot be used. In Bel-
gium it is mandatory to use a BVG approved gas
line.
Figure 1
79
NL
FR
DE
EN
Before First Use
Safety Instructions
This manual is part of the range cooker. It must
be kept nearby during the entire lifespan of the
range cooker.
We recommend reading this manual carefully be-
fore using the range cooker.
The range cooker must be installed by a qualified
technician in compliance with installation instruc-
tions as described in the previous chapter.
This range cooker is suitable for household use,
and complies with current EU guidelines. The
range cooker has been manufactured to cook
and bake foods. Boretti is not liable for unaut-
horized use of the appliance, such as heating up
a space.
Never block the openings and slots of your Bo-
retti, so that proper ventilation is ensured.
This also applies to the air vents on the top/back of
the cooktop, however, only in case of a ventilated
gas oven.
Immediately after installation, the range cooker
should be thoroughly tested, and any malfuncti-
ons reported.
Never place pans or objects on the range coo-
ker if they do not have a smooth and flat bottom
surface.
Never place combustible products in your oven.
Unexpected ignition could result in fire.
The range cooker is designed for use by adults
– never allow children to remain near the range
cooker unsupervised.
Certain parts such as the grill element can beco-
me extremely hot. Therefore do not allow children
to play or be near the range cooker.
After every use, verify that all control knobs are
set to “off”.
In case of doubt regarding the safety instructions
of your Boretti, we urgently recommend that you
call Boretti. You will find our phone numbers on
the back of this manual.
Do not use parchment paper when grilling.
Never put combustible objects or products that
could melt at low temperatures in the storage
space below the oven.
Environmental Regulations
Never leave packaging unsupervised. Separate
the various packing materials by type, and take
them to the nearest waste sorting station in your
municipality.
We use non–polluting and therefore environmen-
tally–friendly and recyclable materials for the pac-
kaging of our products. We ask for your coope-
ration in making sure that the packing materials
are processed properly. Addresses for collection,
recycling and processing centers are available at
your dealer or the appropriate local institutions.
Never simply dump packaging or parts of it. This
could be a choking hazard for children, particu-
larly the plastic bags. You are also responsible for
proper processing of the old appliance.
Important: take the appliance to a local company
authorized to collect discarded household applian-
ces. With proper processing, valuable materials
can be recycled in an intelligent fashion. Before
you dispose of your appliance, it is important that
you remove the door, and leave the racks in func-
tional position in order to avoid children getting
shut into the oven cavity while playing.
80
In addition, you should cut off the electrical power
cord, and remove it together with the plug. The
guidelines determine standards for collection and
recycling of discarded appliances which apply to
the entire European Union.
Cleaning Before First Use
It is recommended to thoroughly remove all pac-
kaging residue from the range cooker, followed by
cleaning according to the guidelines. Before first
use of the oven, you should heat the oven at full
power for 30 minutes. An unpleasant scorching
smell will develop during this initial heating. This
is normal.
We recommend that you ventilate the kitchen area
thoroughly during initial heating.
81
NL
FR
DE
EN
Operating the
Programmable LCD
Clock
None of the oven functions will work before you
have activated the clock on your Boretti. You
will recognize this by a full blinking display. This
might occur before first use, or following a power
disturbance. Functions for ventilated gas ovens
are different from multifunctional ovens. The pro-
grammable clock functions only work on ovens 60
and 80 cm wide. If you have a range cooker with
2 ovens, the clock will normally only work for the
left–hand oven. When programming the oven, if
the A blinks and an audio signal is heard, an er-
ror has occurred. Choose the manual function to
override previous settings.
Setting the Correct Time
Adjust the digital clock by pressing on the buttons
and
and using the + and – button at the
same time. Set the correct time in this way.
Manual Function
You can activate the manual function by simulta-
neously pressing buttons
and
. The let-
ter A will disappear, and a symbol showing a pan
will appear. Any programs you set earlier will be
canceled by this procedure.
Adjusting the Audio Signal
You can set the audio signal by pressing the –
button until you hear a signal you like. Your range
cooker will remember the setting chosen and will
use the tone you selected from that moment on.
The Timer
Select the timer function by pressing the button
and using the + and – buttons to determine
the desired cook time. While the time counts
down, the clock symbol will remain lit up. When
the cook time has ended, an audio signal will
sound. When using this function, your oven must
be switched off manually. If you want the oven to
switch off automatically, you must use the pre–
programmed baking function set to the desired
cook time.
Pre–Programmed Baking
1. Pre–Programmed Baking Function with Cook
Time
This function allows you to use the oven for a
certain period of time, after which the oven will
switch off. Press the button
and use the +
and – buttons to set the desired cook time. The A
symbol will appear in the display. Press the but-
ton
,if you want to see at what time the oven
will switch off. After the cook time has ended, the
oven will switch off automatically and the audio
signal will sound. The A will blink while the audio
signal sounds. By pressing buttons
and
at the same time, you will cancel the preset pro-
gram, and you can now use the manual function
for the oven.
82
2. Programmed Baking Function with Preset Start
and End Time
You can use this function to set both the start
and end time for your oven. Press on the button
and use the + and – buttons to set the cook
time for your dish. An A will appear in the display.
Next, press on the button
and use the +
and – buttons to set the end time. Then adjust
the oven temperature and select the desired oven
function. The oven will now switch on and off at
your selected times. When the oven switches off,
an audio signal will sound automatically. By pres-
sing on the buttons
and
at the same
time, you will cancel the preset program and you
can now use the manual function for the oven.
Caution: Some dishes are perishable and cannot
remain in an uncooled oven for an extended period
of time.
Caution: Take preheating time into account when
determining the cook time in using the automatic
baking function with preset start and end times.
83
NL
FR
DE
EN
Operating the
Programmable LCD
Clock of a Gas Oven
Setting the Correct Time
Press on the button
once. Then immediately
press on the + and – to adjust the minutes. Press
on the button
again, and hold until the hour
starts to blink. You can now use the + and – but-
tons to set the hour.
Setting the Timer
Press on the + and – buttons to set the desired
cook time. A symbol
will show in the display,
indicating that the timer has been set. The display
only indicates time left until the alarm sounds,
current time will not be shown during this pe-
riod. After the set time has passed, an alarm will
sound that you can switch off by pressing on the
button
.
Adjusting the Audio Signal
You can adjust the audio signal by pressing the –
button until you hear a tone you like. Your range
cooker will remember the chosen setting and will
use the tone you selected from then on.
NOTE: It may occur that your Boretti with gas oven has five
buttons. In this case two buttons will have no function.
84
Operating the
Programmable
Analog Clock
If the small display (Fig. 2d) shows a “0”, the
child–proof lock has been activated for your oven,
and therefore it cannot be used. If the hand sym-
bol shows on the display (Fib 2d), the oven is set
to manual. You can activate the manual function
by turning the button (Fig. 2e) to the right, wit-
hout pressing on it.
Setting the Correct Time
Press on the button and turn it to the right until
the current time is shown. The time is shown by
the hands shown in Figure 2a and 2b.
Manual Function
You can select the manual function by turning the
button (Fig 2e) to the right until the hand is dis-
played (Fig. 2d). Using this function, you can set
the desired temperature and oven function, and
use the oven immediately.
Timer with Automatic Countdown
It is easy to set the desired cook time by turning
the button (Fig. 2e) to the right, without pressing
on it, until you see the desired cook time in the
small display (Fig. 2d). Cook time can be set to a
maximum of 180 minutes.
Next, choose the temperature and the oven func-
tion. After the selected cook time has ended, an
audio signal will sound. The oven will switch off.
You can switch off the audio signal by setting the
button (2e) to manual.
Pre–Programmed Baking
1. Programmed Baking Function with Preset Start
Time
In order to adjust the oven in such a way that it
will switch on without switching off automatically
after cook time has ended, you must follow these
steps:
Turn the button (Fig 2e) to the right until “0” ap-
pears in the display (Fig. 2d). Carefully pull the
button towards you, and turn it to the right until
the hand (Fig. 2c) indicates your desired start
time. Let go of the button, and now turn it to
the right until the hand appears in the display.
Now select the correct baking function and tem-
perature.
Caution: When using this function, the oven must
be switched off manually!
Caution: Some dishes are perishable and cannot
remain in an uncooled oven for an extended period
of time.
Caution: Take preheating time into account when
determining the cook time for the automatic ba-
king function with preset start and end times.
2. Programmed Baking Function with Preset Start
and End Times
In order to adjust the oven in such a way that you
can determine the end time before starting, fol-
low these steps:
Turn the button (Fig 2e) to the right until “0” ap-
pears in the display (Fig. 2d). Carefully pull the
button towards you, and turn it to the right until
the hand (Fig. 2c) indicates your desired start
time. Next, turn the button until the desired cook
time appears in the display (Fig. 2d). Maximum
adjustable cook time is 180 minutes. Now set
the oven to desired oven function and adjust the
temperature. Your oven will switch on at the
time selected, and continue for the period set by
you. After the cook time has ended, the oven will
switch off automatically and an audio signal will
sound. You can switch off the signal by turning
the button to the right until the hand appears in
the display.
Figure 2
85
NL
FR
DE
EN
Instructions for
Oven Use
Descriptions of Various Oven
Functions
Caution: Before using the gas oven, we refer you
to the chapter “Using a Ventilated Gas Oven”
In order to make a selection from the following
oven functions, turn the oven knob to the left un-
til the function you want shows at the top. Then
choose the temperature. Depending on the op-
erating clock setting, the oven will start to pre-
heat. See Chapter “Quick–Start” on page 86 for
instructions about accelerated preheating.
Thaw Function
The thaw function will switch on the
fan in the back of the oven so that an
air stream will start flowing which will
slightly speed up the thawing of your dish. This
function cannot be compared with, for example,
a microwave oven. You must also make sure that
the oven is clean, because raw, unprocessed
foods are being handled.
Convection Heating
The heat is supplied directly by the
heating element mounted in the back
of the oven around the fan. This ad-
justment is very suitable for baking or roasting a
complete meal. It is possible to cook on several
levels because of the circulating heat. Often con-
vection heating is the most popular function of
the oven.
Caution: In many cases, this function will also re-
duce the cook time of a dish.
Intensive baking
A rapid, intensive form of baking, par-
ticularly well suited for preparing vari-
ous oven dishes. The upper and lower
heating elements, together with the convection
fan, provide the best baking results and even dis-
tribution of heat.
Circulation Grilling
The heat generated by the grilling ele-
ment will be evenly distributed through-
out the oven by the fan in the back of
the oven. This is suitable for grilling such foods as
pork chops, sausages, skewers, etc.
Caution: The oven door should be closed during
grilling.
Grilling
Conventional grilling with the grilling el-
ement only. This is suitable for grilling
such foods as chicken and roasts. It is
also often used for cooking au gratin, or preparing
deserts with caramelized sugar.
Caution: The oven door should be closed during
grilling.
Top Heat
This should be used to slowly brown
the top of a dish, but can also be used
to cook a dish au gratin more slowly
than when using the grill.
Bottom Heat
This function is very suitable for dishes
that need to rise. It can be used in
combination with the convection func-
tion. In other words, if the product has risen, it
can continue to bake with the convection function.
This function is also commonly used to prepare
pizzas.
Top and Bottom Heat
A function that works like a convention-
al oven, but includes a top heating ele-
ment. It can be used for all dishes that
could also be prepared in a convection oven.
0
control knob:
electric ovens 60 and 80 cm wide
0
control knob:
electric ovens 30 and 40 cm wide
86
Pizza setting
The pizza setting is well suited for
dough-based dishes such as pizzas and
quiches. The lower heating element
used in conjunction with the convection system
provide the best baking results.
Lighting
The light in the oven will switch on as
soon as you select any particular oven
function. If you prefer to prepare a dish
without using the oven light, turn the knob 1 posi-
tion up from your selection and then turn it back
to the correct selection.
Caution: Ovens 60 and 80 cm wide are always
multifunctional unless you ordered a ventilated
gas model.
Caution: Ovens 30 and 40 cm wide are always
conventional. These ovens offer grilling, top heat,
bottom heat and top and bottom heat.
Quick–Start Function
The Quick–Start function is ideal for anyone who
wants to preheat their 60 to 80 cm wide electric
oven more quickly. You use the Quick–Start func-
tion by setting the oven control knob to “thaw” and
adjusting the temperature to the desired setting.
The oven will now use all available heat sources
to reach the desired temperature. As soon as
the oven has reached the correct temperature,
the orange light will switch off. Then select the
desired oven function.
Caution: The Quick–Start function can be used
for selected end temperatures between 180 and
250°C. Any advantages at lower end tempera-
tures are negligible. Never use the Quick–Start
function for more than 30 minutes at a time.
Grill Oven
Some range cookers are fitted with a separate
grill oven. This grill oven actually works exactly
like a regular one, but includes additional func-
tions. The grill oven is standard fitted with tel-
escopic gliders which simplify putting the dish in
and removing it. In order to catch juices or food
spills, we recommend that the black drip pan in-
cluded with your oven always be used.
Caution: The oven door should be closed when us-
ing the grill oven.
Using the Rotisserie
Place the item on the rotisserie. Use two meat
clamps to make sure the meat is secure, and
the weight is distributed evenly across the rotis-
serie. This will prevent the rotisserie motor from
overheating. Place the rotisserie in its holder, and
insert the end into the rotisserie motor opening.
Select the grilling function, and set the desired
cook time. Always place a drip pan beneath the
dish.
Casing Cooling System
Every Boretti range cooker is fitted with a so–
called casing cooling system. This ensures that
the outside of the range cooker remains at an
acceptable temperature. A sensor in the range
cooker ensures that if the temperature becomes
too high, the forced cooling switches on automati-
cally. It may continue to cool even after the oven
has been switched off. In part because of this
system, it is possible to place a Boretti range
cooker between kitchen cabinets.
Dismantling the Oven Door
It is easy to remove the door from your Boretti
range cooker. Please follow these instructions:
Open the oven door completely. Move the fitted
Figure 3
Figure 4
87
NL
FR
DE
EN
brackets to an upright position (Fig. 3a)
Close the door halfway. Without using force, pull
the door slowly towards you (Fig. 4). Attaching
the door is done in reverse order. However, you
must make sure that the little slots underneath
the bracket fit onto the frame of the range cooker.
This may take some practice.
Dismantling the Oven Glass Panel
In order to remove the glass panel from a Boretti
oven door, take the following steps:
Remove the oven door according to the instruc-
tions above. Unscrew the two stainless steel
screws (Fig. 5) at the top and the bottom of the
glass panel, and gently remove the glass panel
(Fig. 6). You can now clean it thoroughly. When
you reinstall the panel, make sure that the stain-
less steel strips clamp the panel properly.
Removing the Inside Panels from the
Oven
In order to remove the inside panels from the
oven, follow these steps:
• open the oven door completely
remove all racks and baking sheets from the
oven cavity
There are two large screws that you can unscrew
on the sides, after which the side panels can be
easily removed.
Cleaning the Oven Cavity(s)
Wait until the oven has cooled down completely,
then clean it with lukewarm water and a mild
cleaning agent. Never use knives, steel–wool pads
or other abrasive products or objects for cleaning
purposes. This might damage the finish on the
inside of your oven. Make sure that food spills are
removed after every cooking session, in order to
prevent damage. An additional advantage of regu-
lar cleaning is that there will be fewer unpleasant
odors the next time you use the oven.
Using the Built–In Thermometer
Some range cookers are fitted with a so–called
built–in thermometer. When the oven is cold,
insert the thermometer’s probe into the dish,
and the plug into a special connection that is on
the left side of the oven (Fig. 7). Two values will
appear on the display: The value on the left will
indicate the temperature of the thermometer,
and the value on the right will indicate the pre-
set temperature, which can be adjusted using the
+ and – button on the control panel. When the
preset temperature has been reached, the oven
will switch off and you will be warned by an audio
signal. You can switch the sound off by pressing
on any button on the operating panel.
Remove the thermometer from the connection af-
ter the oven has cooled down. Of course you can
remove the probe from the dish earlier, so that
the dish can be taken from the oven. The oven
thermometer has a reach from 0 – 99°C.
Caution: insert the thermometer into the center
of the dish, and avoid bones or fatty areas in or-
der to achieve a more accurate reading.
See Page 95 for a cooking chart.
Figure 5
Figure 6
Figure 7
88
Pizza Stone
The Pizza Stone is made from select heat–resi-
stant clay, which was baked at a temperature of
1320°C. The stone is resistant to damage from
temperature changes, as well as being scratch
and dust free. The special design with air chan-
nels keeps the weight down, and decreases pre-
heating time. Heat is distributed evenly throug-
hout the clay, so that the entire surface has the
same temperature and your pizza will have the
same temperature and color all over.
Place the pizza stone in the oven during prehe-
ating. As soon as the oven reaches its preset
temperature, place the dish on the pizza stone.
Use parchment paper so that the dish can easily
be placed into, and removed from the oven. In ad-
dition, your pizza stone will not become soiled, so
that you do not have to clean it.
The best way to clean it is by removing food spills
with a spatula or knife. Place the stone back into
the oven, and heat up the stone. Then clean it with
a scrubbing pad, and rinse with warm water.
Caution: Do not use cleaning agents.
The pizza stone may discolor over time. This
has no influence on the performance of the pizza
stone.
89
NL
FR
DE
EN
The Ventilated Gas
Oven
Caution: An upright stainless steel strip will be
provided with your range cooker. This absolutely
must be installed on a ventilated gas range cooker
in order to guarantee proper venting.
Ovens 60 and 80 cm wide can be purchased as
ventilated gas ovens if this is technically possi-
ble (this is not an option for all models, and this
choice can only be made on purchasing the range
cooker). The advantage of a gas oven is that less
moisture is extracted from the food, so that it is
tastier. A disadvantage of the system is, however,
that a number of functions can no longer be used
due to a lack of electrical heating elements.
Igniting the Gas Oven
In order to light the gas burner in the oven, you
must open the oven door completely, otherwise
the spark ignition will not function. Next, press
on the temperature control knob (Fig. 8) and set
it to the desired temperature.
When the burner lights up, it may take 10 to 15
seconds before you can let go of the knob. This
is related to the thermocouple, which is a safety
feature of your Boretti. Leave the door open for
another minute before closing it. You will not
receive a visual warning that the gas oven has
reached the correct temperature.
Here are a few useful tips for ensuring that the
Boretti range cooker with ventilated gas oven has
reached the correct temperature. If the oven is
switched on, the burner will work at full power to
reach the correct temperature as soon as possi-
ble. You will hear the usual hissing that is normal
for a gas burner. When the correct temperature
has been reached, the hissing will be noticeably
less loud. You can barely hear the burner, or not
at all. You can also look through the small holes in
the bottom of the oven to see whether the burner
is burning at full power. The flame will become
smaller when the correct temperature has been
reached, because it switches to the lowest set-
ting. It will take approximately 8 minutes for the
oven to reach a temperature of 180°C.
It is prohibited to close off the ventilation slots at
the top back side of the appliance with a stainless
steel wall, tiles, etc. You must use the stainless
steel strip provided.
Gas Oven Grill
The gas oven grill can be used in the same way as
in the electric oven. It is important to know that
the grill will stop functioning as soon as the gas
oven is operational. When switching on the grill,
in contrast to switching on the oven, the door
does not have to remain open for a full minute.
Because the grill is electric (also in gas ovens) a
separate control knob has been fitted with positi-
ons from 0 – 12. (Fig. 9)
Caution: The oven door should be closed when
using the grill.
200
150
250
Figure 8
12
0
8
4
Figure 9
90
Gas Oven Fan
As soon as you switch on your gas oven or elec-
tric grill, you can switch on the fan in the back wall
separately by turning the grill control knob (Fig.
9) past position 12. By switching the grill knob to
the off position, the fan will be switched off. The
advantage of switching on the fan is that there
will be improved heat distribution throughout the
oven, so that it will be easier to prepare multiple
dishes in the ventilated gas oven. Please take into
account that this is not the same as the convec-
tion function in the electric oven, and a substan-
tial difference in temperature will remain inside
the oven. The closer to the heat source (i.e. the
gas burner or grill), the hotter it will be.
Caution: the grill will not work if the gas burner
is on. It is therefore not possible to use the gas
burner and grill at the same time.
Caution: When you use the gas burner together
with the fan, you must switch both control knobs
to the off position when the dish is done.
If you only switch off the oven burner, the grill
element will become active.
91
NL
FR
DE
EN
The Cooktop
General Information about Gas Burners
Always use pots and pans with a level and smooth
bottom, which have the correct diameters for op-
timal results.
See the following chart for correct diameters:
*Applies to the bottom of the pan.
Boretti gas burners consist of three parts, na-
mely the base (Fig. 10a), the brass flame distri-
butor ring (Fig 10b) and the cap (Fig. 10c). There
are two holes in the base, one of which is for
the spark ignition, and the other for the thermo-
couple. The thermocouple safety system ensures
that the gas flow is cut off as soon as the flame
is extinguished by, for example, a draft. The ther-
mocouple must be heated thoroughly before you
can let go of the knob for the burner to remain on.
If you release the knob too quickly, the burner will
switch off because the thermocouple has been
insufficiently heated.
After pressing the knob, you will hear the spark
ignition click. It is now active for all burners. The
speed with which the flame ignites depends on
the position chosen. You can experiment until you
have found the quickest way to light your stove.
Once the flame is burning, keep the knob suppres-
sed for at least 5 seconds in order to activate the
thermocouple safety system. If you release the
knob too quickly, the flame will extinguish.
Caution: It is very important for the brass flame
distributor ring (Fig. 10d) to be positioned cor-
rectly on the base (Fig. 10a). You must verify that
the ridge on the brass flame distributor ring (Fig.
10e) is placed exactly in the groove (Fig. 10b) of
the aluminum base. In addition, the burner must
always be placed level to the surface in order to
prevent discoloration.
Not all of the burners have the same capacity,
and therefore result in different cook times. The
least powerful burner (semi–rapid burner) is nor-
mally used for sauces, soups and braised dishes.
Based on the power of this burner, we recommend
using a Boretti simmer plate.
Caution: When using the back burners, make sure
the pots do not touch the wall or back surface,
because the pots will become very hot and the
wall might not be heat proof. Make sure there is
always at least 2 cm of space between the wall
and the pots.
Caution: Make sure that the handles and grips
do not protrude, so that you will not bump into
them accidentally and the pans fall from the cook-
ing area.
Wok Burner
Boretti wok burners have 3 rings. Together these
provide balanced power of 4.5 kW max. This po-
wer is more than enough to be able to stir fry in
the proper manner. When lighting this burner, the
outside ring will ignite first, after which the two
inner rings will ignite. This is normal. Please take
a shorter cook time into account because of the
increased capacity of this burner.
Burner Diameter
Semi–rapid burner 14 tot 20 cm
Rapid burner 20 tot 24 cm
Wok burner 22 tot 28 cm *
Fish burner Ovale pan
Figure 10
A) Aluminum base
B) Groove in base
C) Cast iron burner cap
D) Brass flame distributor ring
E) Ridge on the flame distributor ring
92
Fry-top
The Fry Top is a multifunctional griddle on which
an enormous range of dishes can be prepared. A
DVD has been made about the Fry–Top so that
you can discover exactly how it works, what the
possibilities are, and how to clean it. This DVD
can be watched as streaming video on the web-
site, but will also be included with your range. If
the DVD has inadvertently not been included, you
can request a copy from Boretti.
Ignite the Fry–Top burner and select a low set-
ting. After 8 – 10 minutes the Fry–Top is ready
for use. Next, evenly spread a little oil on the grid-
dle (never use butter on the Fry–Top) after which
you can put the food directly onto the griddle. Fry-
ing will be slower on the Fry–Top, yet the dish will
not start to simmer. Because the food is seared
quickly, it loses less moisture.
Cleaning the Fry Top
When the food is ready, remove it from the Fry–
Top and pour a little water onto the Fry–Top be-
fore leaving to enjoy your food. The water will soak
any food residues, which you can then scrape off
with the spatula included. It will make clean–up
much easier. Beware of steam that will rise from
the Fry–Top – it is hot! When the griddle has
cooled down almost completely, spray on a lit-
tle Fry–Top cleaner and scrub with the steel wool
pad included. Finally, use a moist cloth and your
Fry–Top will be like new. If necessary, use a soft
scrubbing pad for the small nooks and crannies.
Coupe de Feu
The Coupe de Feu is made of solid cast iron, and
allows one or more pots or pans to be placed di-
rectly onto the cooking surface. The plate is heat-
ed by a sub–surface gas burner. The plate will
generate heat which is not too intense beneath
the pan, and will distribute it evenly across the
cooking surface. This makes it possible to cook
a dish slowly. This is especially useful for dishes
like sauces and braised dishes. Light the burner
approximately 5 minutes before use, so that the
cast iron plate will have plenty of time to heat
up. The same amount of time is needed for the
plate to cool down. The middle of the Coupe de
Feu is hottest, and the edges will be cooler. If you
require a more intense heat, you can also choose
to remove one or more rings. Without constantly
needing to adjust the knob, this allows you to de-
termine the amount of heat generated.
Caution: It is normal that the Coupe de Feu will
show a little surface rust after time. We recom-
mend regularly rubbing the Coupe de Feu with a
little oil to prevent this. The rings, or any other
cast iron parts, should never be cleaned in the
dishwasher.
93
NL
FR
DE
EN
Adjusting the Gas Burners
You can easily adjust or trim the gas burners
yourself. You can do this if, for example, if the
range has been converted to another type of gas,
or you would like stronger or weaker gas flow.
Ignite one burner at a time, and switch to the
lowest position. Pull out the knob of the burner
in question, and place a small screwdriver in the
opening just above the pin of the knob (Fig. 11).
Right above the pin, you will see a small brass
screw which you will use to adjust the gas flow.
Turn to the left for a higher flame, and to right for
a lower one.
Cast Iron Grill Plate
The cast iron grill plate is ideal for roasting meat.
Position the grill plate on one of the burner grates
which is suitable for your type of grill plate, and
switch on the burner. After about 10 minutes the
grill plate will be thoroughly heated and ready for
use. It is best to clean the grill plate with some
suds and hot water.
Cleaning the
Cooktop
Aluminium Burner Base
The aluminium bases (Fig. 10a) will lose their
original sheen after use. This is normal. The
aluminium burner bases can be cleaned with a
scrubbing pad.
Brass Flame Distributor Ring
The brass flame distributors (Fig. 10d) will nor-
mally discolor slightly after use. The flame dis-
tributor rings can be cleaned with a scrubbing
pad.
Burner Grates and Burner
The cast iron burner grates and caps can also
discolor slightly after use. It is best to clean them
with a mild detergent and brush. After cleaning,
make sure to dry the parts very carefully to pre-
vent rusting. The cast iron parts can be treated
with oil occasionally.
Drip Tray
The range cooker drip tray must never be
scrubbed. It is best to clean it with a mild deter-
gent and cloth. Avoid excessive water use near
the white spark ignition of the gas burners.
Caution: never clean individual range cooker parts
in the dishwasher.
Figure 11
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99

BORETTI VP64 IXBE LINEA PRINCIPALE Owner's manual

Category
Ovens
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI