Royal Sovereign ES-400C User manual

Category
Laminators
Type
User manual
LAMINATOR MODEL NO. ES-400C
OWNER'S MANUAL
Royal Sovereign International Inc.
Read all instructions carefully before use.
For any customer support needs, please choose the
« Customer Support » tab on www.royalsovereign.com
MAJOR PARTS 3
CHARACTERISTICS OF ES SERIES 3
SAFETY PRECAUTIONS 4
HOT LAMINATING PROCEDURE 5
COLD LAMINATING PROCEDURE 6
SPECIFICATIONS 7
TABLE OF CONTENTS
ES-400C
TOPIC PAGE
ES-400C
MAJOR PARTS
CHARACTERISTICS OF ES SERIES
FRONT OPENING
BASE
READY INDICATOR LIGHT
COVER
POWER SWITCH
3
1. The ES Series has been designed and manufactured to provide lamination for
all of your school, home and office needs.
2. Easy operation.
3. The ES-400C offers a cold lamination feature that will protect your heat
sensitive material.
4. The ES-Series is designed with a stylish rounded design
that complements any environment.
SAFETY PRECAUTIONS
The safety recommendations outlined in this section are to be read
and followed before operating this machine. Keep this information for
future reference.
1. To prevent the possibility of a fire or injury,do not allow foreign
articles(neckties, scarves, or parerclips) inside the machine.
2. Do not attempt to laminate items that exceed total
recommended material thickness.
3. Do not insert pouch film with the back end first.
(Front of film: sealed side,Back of film unsealed side.)
This may cause the pouch to jam the rollers.
4. To prevent the possibility of electric shock, do not immerse
the laminator in water or permit liquids inside the machine.
5. Because the laminator creates heat, keep out of reach of
children.
6. Do not cut pouch before inserting into laminator.
(This will cause the laminator to jam.)
7. Do not laminate leaves, flowers, clothes etc.
4
ES-400C
8. If the room temperature is low(under 64f), The ready light
may take longer to come on.
9. Plug the laminator in after verifying the correct voltage.
Failure to comply with the above information could result in
serious injury.
HOT LAMINATING PROCEDURE
5
1. Turn the power switch to the hot position.
The power indicator will light. Allow approximately 10 minutes to preheat.
When the proper temperature is reached, the "ready" light will go on.
2. Place the item to be laminated into the laminating pouch.
3. Insert the pouch film into the front opening of your laminator.
Be sure to center the laminating pouch as it is inserted.
4. The item will autormatically feed out through the rear of the
laminator.
(SAFETYNOTE: The laminated item may be too hot to touch.)
5. If the item is not completely laminated, repeat steps 3-5.
NOTE: Your finished laminated item will be hot,and will easily bend.
To keep your laminated item flat , place on flat surface and allow to cool.
ES-400C
COLD
LAMINATING PROCEDURE
1. Turn the power switch to the cold position (" ="). The
power indicator light will not light, but the machine is
now ready to laminate in the cold mode.
2. Place the document to be laminated on the adhesive
side of the cold film with the document face down.
3. Insert the document to be laminated into the front
opening of the machine.
4. Remove paper liner from the cold film slowly while the
document is being inserted into the machine.
6
NOTE: When switching the machine from the hot to cold mode, it will
take approximately 30 minutes for the ready indicator light to turn off.
Please wait for the light to turn off before inserting your document.
ES-400C
SPECIFICATION
7
DESCRIPTION ES-400C
Dimensions
8.3x5.1x3.3 (inch)
210x130x85(mm)
Max. Laminating Width
4.3 (inch) 110 (mm)
Max. Laminating thickness
27.6 (mil) 0.7 (mm)
Film Thickness 75~125(micron), 3~5 (mil)
Number of rollers 2
Cold Function YES
Heater Source Hot shoe
Read Time 10 (min)
Motor Type AC motor
Laminating Speed
6.5 (inch/min)
165 (mm/min)
Weight
2.05 (lbs) 0.93 (kg)
Voltage/Cycle
AC 100V~120V(50/60Hz)
AC 220V~240V(50/60Hz)
Power Consumption
100 W
ES-400C
www.royalsovereign.com
RS Holland B.V.
Industrieweg 6K 4104AR Culemborg, The Netherlands.
TEL : +31(0) 34-547-3097
FAX : +31(0) 23-565-4565
RS International Australia PTY. LTD.
30 Prime Drive, Seven Hills, NSW 2147, Australia
TEL : +61) 2-9674-2127
FAX : +61) 2-9674-2027
CORPORATE HEADQUARTERS
Royal Sovereign International Inc.
2 Volvo Drive, Rockleigh, NJ 07647 U.S.A.
TEL : +1) 800-397-1025 FAX : +1) 201-750-1022
Royal Sovereign Inc.
<Oversea Sales Office>
1001, World Meridian II, 426-5, Gasan-dong,
Geumcheon-gu, Seoul, 153-759, KOREA
TEL : +82)2-2025-8800 FAX : +82)2-2025-8830
RS Canada Inc.
164 Oakdale Road, Toronto, Ontario M3N 2S5
CANADA
TEL : +1
) 416-741-8400 FAX : +1) 416-741-8185
www.royalsovereign.com
RS Holland B.V.
Industrieweg 6K 4104AR Culemborg, The Netherlands.
TEL : +31(0) 34-547-3097
FAX : +31(0) 23-565-4565
RS International Australia PTY. LTD.
30 Prime Drive, Seven Hills, NSW 2147, Australia
TEL : +61) 2-9674-2127
FAX : +61) 2-9674-2027
CORPORATE HEADQUARTERS
Royal Sovereign International Inc.
2 Volvo Drive, Rockleigh, NJ 07647 U.S.A.
TEL : +1) 800-397-1025 FAX : +1) 201-750-1022
Royal Sovereign Inc.
<Oversea Sales Office>
1001, World Meridian II, 426-5, Gasan-dong,
Geumcheon-gu, Seoul, 153-759, KOREA
TEL : +82)2-2025-8800 FAX : +82)2-2025-8830
RS Canada Inc.
164 Oakdale Road, Toronto, Ontario M3N 2S5
CANADA
TEL : +1
) 416-741-8400 FAX : +1) 416-741-8185
LAMINADOR Modelo No. ES-400C
MANUAL DEL PROPIETARIO
Royal Sovereign International Inc.
Spanish
Lea todas las instrucciones detenidamente antes de usarlo.
Para preguntas, por favor. Visite nuestra pagina de
internet www.royalsovereign.com service al cliente.
PIEZAS PRINCIPALES 19
CARACTERÍSTICAS DE LA SERIE ES 19
PRECAUCIONES DE SEGURIDAD 20
PROCEDIMIENTO DE LAMINADO EN CALIENTE 21
PROCEDIMIENTO DE LAMINADO EN FRÍO 22
ESPECIFICACIONES 23
ÍNDICE DE MATERIAS
TEMA PÁGINA
ES-400C
www.royalsovereign.com
RS Holland B.V.
Industrieweg 6K 4104AR Culemborg, The Netherlands.
TEL : +31(0) 34-547-3097
FAX : +31(0) 23-565-4565
RS International Australia PTY. LTD.
30 Prime Drive, Seven Hills, NSW 2147, Australia
TEL : +61) 2-9674-2127
FAX : +61) 2-9674-2027
CORPORATE HEADQUARTERS
Royal Sovereign International Inc.
2 Volvo Drive, Rockleigh, NJ 07647 U.S.A.
TEL : +1) 800-397-1025 FAX : +1) 201-750-1022
Royal Sovereign Inc.
<Oversea Sales Office>
1001, World Meridian II, 426-5, Gasan-dong,
Geumcheon-gu, Seoul, 153-759, KOREA
TEL : +82)2-2025-8800 FAX : +82)2-2025-8830
RS Canada Inc.
164 Oakdale Road, Toronto, Ontario M3N 2S5
CANADA
TEL : +1
) 416-741-8400 FAX : +1) 416-741-8185
HAUPTKOMPONENTEN 27
MERKMALE DER BAUREIHE ES 27
SICHERHEITSVORKEHRUNGEN 28
VERFAHREN ZUM HEISSLAMINIEREN 29
VERFAHREN ZUM KALTLAMINIEREN 30
TECHNISCHE DATEN 31
INHALTSVERZEICHNIS
THEMA SEITE
ES-400C
www.royalsovereign.com
RS Holland B.V.
Industrieweg 6K 4104AR Culemborg, The Netherlands.
TEL : +31(0) 34-547-3097
FAX : +31(0) 23-565-4565
RS International Australia PTY. LTD.
30 Prime Drive, Seven Hills, NSW 2147, Australia
TEL : +61) 2-9674-2127
FAX : +61) 2-9674-2027
CORPORATE HEADQUARTERS
Royal Sovereign International Inc.
2 Volvo Drive, Rockleigh, NJ 07647 U.S.A.
TEL : +1) 800-397-1025 FAX : +1) 201-750-1022
Royal Sovereign Inc.
<Oversea Sales Office>
1001, World Meridian II, 426-5, Gasan-dong,
Geumcheon-gu, Seoul, 153-759, KOREA
TEL : +82)2-2025-8800 FAX : +82)2-2025-8830
RS Canada Inc.
164 Oakdale Road, Toronto, Ontario M3N 2S5
CANADA
TEL : +1
) 416-741-8400 FAX : +1) 416-741-8185
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Royal Sovereign ES-400C User manual

Category
Laminators
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI