Watlow DPAC User guide

Watlow
Brand
Watlow
Model
DPAC
Type
User guide

This manual is also suitable for

Watlow DPAC

The Watlow DPAC is an SCR or thyristor power control utilizing the zero crossover firing method. DPACs come in three models: DPAC-1, DPAC-3, and DPAC-43. The DPAC-1 is a single phase model, the DPAC-3 is a three phase model, and the DPAC-43 is a four wire, three phase model.

All DPAC models use only one set of back-to-back SCR's, except for the DPAC-43, which utilizes three sets of back-to-back SCR's.

DPACs are commonly used to control the power in an ungrounded delta or Y three phase load, as well as in a four wire Y grounded load. They can also be used to control the power in heaters, lighting, and motors, among other applications. Additionally, DPACs feature:

Watlow DPAC

The Watlow DPAC is an SCR or thyristor power control utilizing the zero crossover firing method. DPACs come in three models: DPAC-1, DPAC-3, and DPAC-43. The DPAC-1 is a single phase model, the DPAC-3 is a three phase model, and the DPAC-43 is a four wire, three phase model.

All DPAC models use only one set of back-to-back SCR's, except for the DPAC-43, which utilizes three sets of back-to-back SCR's.

DPACs are commonly used to control the power in an ungrounded delta or Y three phase load, as well as in a four wire Y grounded load. They can also be used to control the power in heaters, lighting, and motors, among other applications. Additionally, DPACs feature:

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Watlow DPAC User guide

Watlow
Brand
Watlow
Model
DPAC
Type
User guide
This manual is also suitable for

Watlow DPAC

The Watlow DPAC is an SCR or thyristor power control utilizing the zero crossover firing method. DPACs come in three models: DPAC-1, DPAC-3, and DPAC-43. The DPAC-1 is a single phase model, the DPAC-3 is a three phase model, and the DPAC-43 is a four wire, three phase model.

All DPAC models use only one set of back-to-back SCR's, except for the DPAC-43, which utilizes three sets of back-to-back SCR's.

DPACs are commonly used to control the power in an ungrounded delta or Y three phase load, as well as in a four wire Y grounded load. They can also be used to control the power in heaters, lighting, and motors, among other applications. Additionally, DPACs feature:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents