Watlow DPAC User guide

Brand: Watlow

Model: DPAC

Type: User guide

This manual is also suitable for

DPAC Field

Watlow DPAC

The Watlow DPAC is an SCR or thyristor power control utilizing the zero crossover firing method. DPACs come in three models: DPAC-1, DPAC-3, and DPAC-43. The DPAC-1 is a single phase model, the DPAC-3 is a three phase model, and the DPAC-43 is a four wire, three phase model.

All DPAC models use only one set of back-to-back SCR's, except for the DPAC-43, which utilizes three sets of back-to-back SCR's.

DPACs are commonly used to control the power in an ungrounded delta or Y three phase load, as well as in a four wire Y grounded load. They can also be used to control the power in heaters, lighting, and motors, among other applications. Additionally, DPACs feature:

Watlow DPAC

The Watlow DPAC is an SCR or thyristor power control utilizing the zero crossover firing method. DPACs come in three models: DPAC-1, DPAC-3, and DPAC-43. The DPAC-1 is a single phase model, the DPAC-3 is a three phase model, and the DPAC-43 is a four wire, three phase model.

All DPAC models use only one set of back-to-back SCR's, except for the DPAC-43, which utilizes three sets of back-to-back SCR's.

DPACs are commonly used to control the power in an ungrounded delta or Y three phase load, as well as in a four wire Y grounded load. They can also be used to control the power in heaters, lighting, and motors, among other applications. Additionally, DPACs feature:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Watlow DPAC User guide

Brand: Watlow

Model: DPAC

Type: User guide

This manual is also suitable for

DPAC Field

Watlow DPAC

The Watlow DPAC is an SCR or thyristor power control utilizing the zero crossover firing method. DPACs come in three models: DPAC-1, DPAC-3, and DPAC-43. The DPAC-1 is a single phase model, the DPAC-3 is a three phase model, and the DPAC-43 is a four wire, three phase model.

All DPAC models use only one set of back-to-back SCR's, except for the DPAC-43, which utilizes three sets of back-to-back SCR's.

DPACs are commonly used to control the power in an ungrounded delta or Y three phase load, as well as in a four wire Y grounded load. They can also be used to control the power in heaters, lighting, and motors, among other applications. Additionally, DPACs feature:

Related papers

Other documents