Contec BX-U200 Owner's manual

Type
Owner's manual

This manual is also suitable for

Contec BX-U200 is a fan-less computer designed for embedded applications, featuring an Intel Atom processor x5-E3940 (1.6GHz) and a compact design for operation in wide temperature ranges (-30 to +50°C). Equipped with USB Type-C and DisplayPort, it offers versatile connectivity options.

Contec BX-U200 is a fan-less computer designed for embedded applications, featuring an Intel Atom processor x5-E3940 (1.6GHz) and a compact design for operation in wide temperature ranges (-30 to +50°C). Equipped with USB Type-C and DisplayPort, it offers versatile connectivity options.

CONTEC CO.
,
LTD.
3-9-31
,
Himesato
,
Nishi
y
odo
g
awa-ku
,
Osaka 555-0025
,
Ja
p
an
http://www.contec.com
/
No part of this document may be copied or reproduced in any form by any means
without prior written consent of CONTEC CO., LTD.
NA07260 (LYYA493) 10012020_rev3 [02142020] October 2020 Edition
Product Guid
e
BOX Computer
BX-U200 Series
Thank you for purchasing this product. The product you have purchased consists of the
following items.
Check, with the following list, that your package is complete.
If you find any item either missing or damaged, please contact the sales representative you
purchased the product from.
For appropriate usage, be certain to read the Reference Manual before using this product.
Visit our website for downloading free other software tools.
The following manuals come with this product. Visit our website and download them by
entering the model type in "Downloads". Read them before using the product.
Before using the product, be certain to read the following guide, manual, and driver
software. They can be downloaded from Contec website.
Name Contents How to
g
et
Product Guide (This sheet) This lists the product configuration and
describes the precautions.
Included in the package
(Printed matter)
Reference Manual This describes the hardware aspects
such as functions and settin
g
s.
Download (PDF)
IPC Precaution List This describes the precautions when
using the product.
Included in the package
(Printed matter)
MICROSOFT SOFTWARE
LICENSE TERMS
This describes the rights and conditions
of user when usin
Windows software.
Included in the package
(Printed matter) *1
Pre-installed type OS Manual This describes OS basic information,
the setup procedure, and the recovery
p
rocedure.
Download (PDF)
Download
https://www.contec.com/download/
1. About the Product
This product is a fan-less computer for embedded applications with an Intel Atom proces-
sor x5-E3940 (1.6GHz). It provides an ultra-compact design with a capability of operating
in a wide temperature range (between -30 and + 50°C – Funless). In addition to USB Type-
C Port, which is widely used in mobile terminals, or Display Port, a wide variety of interfaces
including USB 3.1 Gen1x2 and LANx2 are available. Furthermore, the product models with
wireless LAN function and Bluetooth are ready for connecting digital devices with ease, and
they are ideal as IoT gateway terminals that can link to peripheral devices.
Embedded-type CPU has been adopted. The use of readily available parts ensures the
product to be applied easily. In addition, Contec-customized BIOS allows support to be
provided at the BIOS level.
2. Product Configuration
This product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or
missing items, contact your retailer.
BX-U200-
NA01M03,
BX-U200-
NA01M05
BX-U200-
W19M01M03,
BX-U200-
W19M01M03
BX-U200R-
NA01M03,
BX-U200R-
NA01M05
BX-U200R-
W19M01M03,
BX-U200R-
W19M01M05
[Base Model]
[OS Pre-install
Model]
[Wireless Model]
[OS Pre-install
Wireless Model]
Name Pcs. Pcs. Pcs. Pcs.
The Main Body 1 1 1 1
USB Removal Prevention
Fittin
g
1 1 1 1
USB Type-C Removal
Prevention Fittin
g
1 1 1 1
DIO Connector
Complete Set
Housing 1 1 1 1
Contact 5 5 5 5
3-pin Connector for Power
Suppl
y
1 1 1 1
Antenna - - 2 2
Cable Tie 2 2 2 2
SLIM HEAD Screw
(M2.6x4)
3 3 3 3
Hexagon Head Screw with
Captive Washer and Cross Re-
cessed (M4 x 10, black)
4 4 4 4
Product Guide (this sheet) 1 1 1 1
IPC Precaution List 1 1 1 1
Warranty Certificate 1 1 1 1
Serial Number Label 1 1 1 1
MICROSOFT SOFTWARE LI-
CENSE TERMS
- 1 - 1
Recovery Media - 1 - 1
3. Safety Precautions
Understand the following definitions and precautions to use the product safely.
The caution mark " " on the face of the product indicates that you should always check
the meanings of the symbol described in the manual.
Handling Precautions
WARNING
Always check that the power supply is turned off before connecting or disconnecting
power cables.
Do not modify the product.
Always turn off the power before inserting or removing cables.
For battery replacement, contact your retailer as it must be performed as a process of
repair.
The product is not intended for use in aerospace, space, nuclear power, medical
equipment, or other applications that require a very high level of reliability. Do not use
the product in such applications.
If using the product in applications where safety is critical such as in railways, automotive,
or disaster prevention or security systems, please contact your retailer.
CAUTION
Do not use or store this product in a location exposed to high or low temperature that
exceeds range of specification or susceptible to rapid temperature changes.
Example: Exposure to direct sun In the vicinity of a heat source
Use the product in the specified operating condition (temperature, humidity, vibration
and shock).
The product should always be grounded (earth).
Avoid installing in the place where ventilation of the product may compromise.
Insufficient aeration could heat up the product and lead to malfunctions or damages.
Do not use this product in extremely humid or dusty locations. It is extremely dangerous
to use this product with its interior penetrated by water or any other fluid or conductive
dust. If this product must be used in such an environment, install it on a dust-proof
control panel, for example.
Do not use or store this product in the presence of chemicals.
To clean this product, wipe it gently with a soft cloth dampened with either water or mild
detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to
prevent pealing or discoloration of the paint.
This product’s case may become hot. To avoid being burned, do not touch that section
while this product is in operation or immediately after turning off the power. Avoid
installation in a location where people may come into contact with that section.
When connecting cables, first check the shapes of connectors, and then insert them in
the correct orientation. After they are connected, do not put too much load on the
connected part. Doing so may result in poor contact or damage to the product and the
connected part.
To connect with peripherals, use a grounded, shielded cable.
Do not touch terminals with your hands when the product is in operation. Otherwise, the
product may malfunction, or cause failure.
CONTEC does not provide any guarantee for the integrity of data on storage.
To prevent corruption of files, always shutdown the OS before turning off this product.
CONTEC reserves the right to refuse to service a product modified by the user.
Regardless of the foregoing statements, CONTEC is not liable for any damages whatso-
ever (Including damages for loss of business profits) arising out of the use or inability to
use this CONTEC product or the information contained herein.
In the event of failure or abnormality (foul smells or excessive heat generation), unplug
the power cord immediately and contact your retailer.
4. Specifications
Function Specifications
Item
Description
CPU Intel Atom®x5-E3940 Processor 1.6GHz
BIOS BIOS (mfd. b
y
AMI)
Memor
y
PC3-10600 (DDR3L 1333) ECC 4GB, On Board
Graphics Controller Intel® HD Graphics 500 (CPU inte
g
rated)
System
Resolution
Displa
y
Port 3,840 x 2,160 @ 60Hz
USB Type-C
(DP Alt Mode)
3,840 x 2,160 @ 60Hz
Storage 1 slot, M.2 2242, SATAIII
M.2 card, 32GB (MLC) or 64GB (MLC) mounted
LAN Intel® I210IAT controller
1000BASE-T/100BASE-TX/10BASE-T x 2 ports
RJ-45 connector (supports Wake On LAN)
USB USB 3.1 Gen1 (USB 3.0 Type-A connector) x 2 ports
USB 3.1 Gen1 (USB T
y
pe-C connector) x 1 ports
Securit
y
(TPM)
T
CG TPM2.0
Hardware Monitorin
g
Monitorin
g
CPU temperature, board temperature, power volta
g
e
Watchdog Timer (WDT) Software programmable, 255 level (1sec - 255sec),
Time up allows reset.
General Purpose I/O Non-isolated type Three inputs and Three outputs
(switchable with either remote-reset or remote power-on)
Real Time Clock Lithium backup battery life: 10 years or more
The real-time clock is accurate within ±3 minutes (at 25°C) per
month (CPU inte
g
rated RTC).
Power Management Power management setup via BIOS
Power On by Ring/Wake On LAN
Supports ACPI Power mana
g
ement
Inter
face
Display DisplayPort × 1
USB T
y
pe-C (DP Alt Mode) × 1
LAN 2-port (RJ-45 connector)
USB USB 3.0 Type-A connector 2 port
USB T
y
pe-C connector 1 port
DIO 1 port (4pin connector)
Wireless LAN
*1
IEEE 802.11ac/a/b/g/n
Bluetooth *1 4.2
Power
Supply
Rated Input
volta
g
e
12 - 24VDC
Input Voltage
Ran
g
e
6 - 37VDC
USB PD
(Power
Deliver
y
)
15VDC/3A
Current
Consumption
(Max.)
12V 3.7A
24V 1.9A
External
Device Power
Supply
Capacit
y
USB 3.1 Gen1 Type-A I/F: +5V 1.8A (900mA x 2)
USB Type-C I/F: +5V 1.5A
Physical Dimensions (mm) 110(W) x 90(D) x 29(H)
(Not includin
g
the attachment fittin
g
or protrusions)
Weight 0.42kg (approx.)
(Not includin
g
the attachment fittin
g
)
*1 Wireless LAN and Bluetooth are available only for the products with wireless LAN function.
Environment Specifications
Item Description
Operating Ambient
Temperature *2
-30 - +60°C airflow 0.7m/s
-30 - +50°C no airflow
-30 - +70°C no airflow (With the fan unit (an optional product))
Non-operating Ambient
Temperatur e
-30 - +70°C
Operatin
g
Ambient Humidit
y
10 - 90%RH (No condensation)
Non-operating Ambient
Humidit
y
10 - 90%RH (No condensation)
Floatin
g
Dust Particles Not to be excessive
Corrosive Gases None
Line-noise
Resistance
Line Noise AC Line /±2kV
(IEC61000-4-4 Level 3, EN61000-4-4 Level 3)
Static
Electricity
Resistance
Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
Vibration
Resistance
Sweep
Resistance
10 - 57Hz /semi-amplitude vibration 0.375mm, 57 - 500Hz/5.0G
60minutes each in X, Y, and Z directions (JIS C60068-2-6-
compliant, IEC60068-2-6-compliant)
Item Description
Shock
Resistance
VESA
Mountin
g
100G half-sine shock for 6ms in X, Y, and Z directions
(JIS C 60068-2-27
compliant, IEC 60068-2-27 -compliant)
DIN-rail
Mountin
g
15G half-sine shock for 11ms in X, Y, and Z directions
(JIS C 60068-2-27-compliant, IEC 60068-2-27 -compliant)
Groundin
g
Class D
g
roundin
g
, SG-FG / continuit
y
Standard VCCI Class A, FCC Class A,
CE Marking (EMC Directive Class A, RoHS Directive)*3
TELEC(set with the certified wireless module)*4
*2 Derating occurs due to the way of installation and the load conditions. For further details, see
the “Installation Requirements” section in the Reference Manual.
*3 The wireless model is excluded from CE Standard.
*4 The wireless module is set only in the wireless model.
5. Physical Dimensions
BX-U200-NA01M03, BX-U200-W19M01M03, BX-U200-NA01M05,
BX-U200-W19M01M05
BX-U200R-NA01M03, BX-U200R-W19M01M03, BX-U200R-NA01M05,
BX-U200R-W19M01M05
  • Page 1 1

Contec BX-U200 Owner's manual

Type
Owner's manual
This manual is also suitable for

Contec BX-U200 is a fan-less computer designed for embedded applications, featuring an Intel Atom processor x5-E3940 (1.6GHz) and a compact design for operation in wide temperature ranges (-30 to +50°C). Equipped with USB Type-C and DisplayPort, it offers versatile connectivity options.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI