ENFORCER SS-052BB Installation guide

  • Hello! I am an AI chatbot trained to assist you with the ENFORCER SS-052BB Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Superior Electronics Corporation
No.10, Lane 31, Chongde St., Sinyi District, Taipei City 110, Taiwan
Copyright © 2017 Superior Electronics Corporation. All rights reserved.
All trademarks are the property of Superior Electronics Corporation or their respective owners.
Superior Electronics Corporation's policy is one of continual development. For that reason, we reserve the right to
change prices and specifications without notice. Superior Electronics Corporation is not responsible for misprints.
Tel:886-2-2378-6161 Fax:886-2-2378-6163
E-mail: info@superior-elec.com
Website: www.enforcer.com.tw
PI_SS-052BB_171005.docx
Dual
-
SS
-
052BB
The ENFORCER Dual-Stage Shock Detector is
designed to detect a range of disturbances, and
patented electromagnetic technology helps prevent
false alarms. The shock detector offers a low cost
solution to help protect against vandalism and theft.
It can be used in various applications: ATMs, safes,
change and vending machines, etc.
Patented electromagnetic technology helps prevent
false alarms
Patented 2-stage intrusion detection can alert vandals/thieves
of
their detection and may cause them to flee, minimizing damage
Built-in sensitivity controls for independent adjustment of
each stage
Patented yellow "Turbulence" LED pinpoints exact sensitivity by
warning the installer if environmental interference is high
Two, red and yellow, LED indicators for sensitivity adjustment
Omni-directional shock detection
Shielded from electromagnetic interference
Modular plug for fast installation
Features:
Specifications
:
Operating voltage
12VDC
Current draw
Standby
4mA
Active
Stage one: 15mA, Stage two: 25mA
Output Transistor ground, 100mA
Sensitivity
adjustment
Stage one
1~5, Independently adjustable
Stage two
Mounting
Double
-
sided tape or cable tie
Operating temperature -4°~167° F (-20°~75° C)
Dimensions
2"x1
13
/
16
"x
15
/
16
" (51x46x24
mm
)
Weight
1.6
-
oz (46
g)
Dual-
Stage
Electro-
magnetic
RF
Shielding
Sensitivity
Control
Sample Applications:
ATM
s
Vending
machines
Change
machines
Safe
s
Arcade/Claw/Slot
machines
Doors/Gates
/