Hubbell P403-3194 is a portable, self-contained unit for checking the insulating integrity of electrical live-line tools in accordance with industry standards. It is designed to detect leakage current through a tool. The device has two testing modes: dry and wet. The dry test should be conducted with the power switch in the “DRY” position, while the wet test should be conducted with the power switch in the “WET” position. Prior to testing, thoroughly clean each stick with Moisture Eater II solvent and a nonabrasive cloth. For wet testing the hot stick should be horizontal.
Hubbell P403-3194 is a portable, self-contained unit for checking the insulating integrity of electrical live-line tools in accordance with industry standards. It is designed to detect leakage current through a tool. The device has two testing modes: dry and wet. The dry test should be conducted with the power switch in the “DRY” position, while the wet test should be conducted with the power switch in the “WET” position. Prior to testing, thoroughly clean each stick with Moisture Eater II solvent and a nonabrasive cloth. For wet testing the hot stick should be horizontal.
Hubbell P403-3194 is a portable, self-contained unit for checking the insulating integrity of electrical live-line tools in accordance with industry standards. It is designed to detect leakage current through a tool. The device has two testing modes: dry and wet. The dry test should be conducted with the power switch in the “DRY” position, while the wet test should be conducted with the power switch in the “WET” position. Prior to testing, thoroughly clean each stick with Moisture Eater II solvent and a nonabrasive cloth. For wet testing the hot stick should be horizontal.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI