Tanel PEL-20 User manual

Brand: Tanel

Model: PEL-20

Type: User manual

Tanel PEL-20 is a reliable moisture meter designed for approximate measurements of moisture content in various pellets, including sawdust, wood shavings, hay, straw, dried fruit waste, fragmented waste paper, sunflower hull, buckwheat hull, bran, chaff, sunflower and corn stem, ground grain, rape, and soy oilseed cake. It features a wide measurement range of 10% to 20%, automatic temperature compensation from 0 to 50°C, and a clear LCD display for easy reading.

- 4 -

Limitations

This warranty becomes null and void if you fail to pack your PEL-20

in a manner consistent with the original product packaging and

damage occurs during product shipment.

This warranty does not cover: circumstance beyond our company’s

control; service required as the result of unauthorized modifications

or service; misuse, abuse; failure to follow our company operating

or maintenance instructions.

Repair or replacement without charge is our company’s only obliga-

tion under this warranty. Our company will not be responsible for

any special, consequential or incidental damages resulting from the

purchase, use, or improper functioning of this equipment regardless

of the cause. Such damages for which our company’s will not be

responsible include, but are not limited to, loss of revenue or profit,

downtime costs, loss of use of the equipment, cost of any substi-

tute equipment, facilities of services, or claims of your customers

for such damages.

Serial number .....................................

Production date ...................................

MADE IN POLAND

MOISTURE METER FOR PELLETS PEL-20

USERS MANUAL

Application

Moisture Meter PEL-20 is designed for approximate meas-

urements of moisture contents in pellets made of sawdust,

scobs, wood shavings, hay and straw, dried fruit waste,

fragmented waste paper, sunflower hull, buckwheat hull,

bran, chaff, sunflower and corn stem, ground grain, rape

and soy oilseed cake. It can be used for preliminary meas-

urements of moisture contents of pellets delivered to power

stations. As most other moisture meters the PEL-20

measures the resistance of the material. The measurement

is done by inserting the electrode into a heap of pellets.

Technical data

Range 10% ÷ 20%

Temperature

compensation 0 ÷ 50ºC

Display LCD 3 digits

Electrodes  10 x 1000 mm

Electrodes material acid-proof steel

Power 12V (battery 23A)

Auto power off yes, after 10 minutes

Battery life approx. 10 000 measurements

Size 60 x 50 x 1000 (1500) mm

- 2 -

Moisture contents measurements

Conduct the measurement as follows:

➢ press and hold the „ON/OFF” switch to turn the

device on,

➢ use the „MATERIAL” button to select the appropri-

ate type of pellets,

➢ use the „TEMPERATURE” button to set the approx-

imate temperature of pellets (accuracy of ±5ºC is

enough),

➢ insert the electrode into a heap of pellets and wait

until the result stabilizes,

➢ read the result.

Results over or below the measuring range are indicated as

follows:

➢ below 10% - LO,

➢ over 20% - HI.

Exploitation remarks:

1. Do not sway the electrode while inserting it into

a heap of pellets as it may break off the measur-

ing tip.

2. The device indicates moisture contents at the location

of the tip of the measuring electrode.

3. Conduct several measurements and calculate an aver-

age result.

4. The result is influenced (beside moisture contents) by

other factors:

➢ pellet size,

➢ distribution of moisture contents across the grain

section,

➢ differences in chemical composition between pel-

lets of the same type (e.g. barley straw and rye

straw).

5. Avoid placing a „cold” electrode into „warm” pellets in

order to prevent condensation.

- 3 -

Battery replacement

The instrument is equipped with a power level control unit.

When the power drops below acceptable level a sign "LO

BAT" appears on the left side of the LCD. This indicates that

the battery has expired and should be replaced with a new

one.

To replace the battery:

➢ unscrew the plastic cork in the handle of the device

(an internal spring will push the battery out),

➢ gently sidle the battery compartment out of the

handle (but no further),

➢ remove the old battery,

➢ put the new battery into the compartment (pay at-

tention to correct polarization – minus towards the

spring),

➢ push the battery compartment back in and screw

the plastic cork back on.

Store the device in a dry place.

Producer

TANEL Electronics & IT

General Partnership

PL 44-100 Gliwice, Kopernika 121

tel. +48 32 234-96-15; 32 238-16-15

https://www.tanel.com.pl/

Guarantee

TANEL Electronics & IT warrants the Moisture Meter for

Pellets PEL-20 to be free from malfunction and defects in

both materials and workmanship for one year (12 months)

from the date of purchase.

If the PEL-20 does not function properly during the warran-

ty period due to defects in either, materials or workman-

ship, our company will, at its option, either repair or replace

the instrument without charge, subject to the conditions

and limitations stated herein. Such repair service will include

any necessary adjustments and replacement part.

Tanel PEL-20 User manual

Tanel PEL-20 User manual

Other documents