INSTALLATION, OPERATION, AND
MAINTENANCE MANUAL FOR TANKLESS ELECTRIC WATER HEATERS
PROSERIES XTP™
2
\
ProSeries XTP models are approved for zero clearance to combustible surfaces such as plywood.
Above clearances are recommended for service and installation.
1. Locate the best position to mount the unit. Check clearances around the unit according to the diagram below. Measure from
the top, bottom, left & right sides of the bracket to ensure proper clearances.
Hang the slide lock wall mounting bracket utilizing the appropriate anchors for the wall in at least 4 hole locations.
10" Top Clearance
8" Clearance
8" Clearance
18" Clearance
Upright
Installation
8"
Clearance
Measure 13" from top edge for 10" Top Clearance
Measure 30.5" from bottom edge for 18" of clearance
8"
Clearance
Alternate
Installation
3
APPLICATIONS SCHEMATICS
4
5
6
7
8
9
10
11
12
13
14
15
16
EX07200-89 REV A
17
USA AND CANADA:
Eemax Inc.
400 Captain Neville Drive, Waterbury, CT 06705
Toll Free: 1-800-543-6163, or 203-267-7890 Fax: 203-267-7975
Eemax.Support@eemax.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Air Lift 93355 Installation guide
-
-
-
Master Lock 101KA User manual
-
-
WhisperKool SC PRO 4000 Self Contained Owner's manual
-
Brinkmann 810-7741-0 Owner's manual
-
-
DriSteem XTP 048 Installation, Operation and Maintenance Manual
-
