2. Baby Lock
  3. BLE-CF5
BLE-CF5

Baby Lock BLE-CF5 Operating instructions

  • Hello! I've reviewed the instructions for the Cording Foot BLe-cF5, and I'm here to assist with any questions you might have. This document outlines how to serge decorative cording and piping, discussing optimal machine settings and fabric insertion techniques.
  • What stitch type should I use?
    Should the upper knife be engaged or disengaged?
    What is the recommended stitch width?
    What is the recommended stitch length?
    What is the recommended differential feed?
M a c h i n e S e t t i n g S
Stitch type: 4 Thread Overlock
Needle: Both
Sewing foot: Cording foot
Upper knife: Engaged “UNLOCKED”
Stitch width: 3.5 -7.5 mm
Stitch length: 2.5
Differential feed: 2
i nS e r t i n g t he F aB r i c :
1. Raisethe sewing foot.
2. Raise the needles to the highest position.
3. Layer the bottom fabric, cording tape and top fabric
right-sides together under the sewing foot.
4. Make sure the edge of both fabrics and cording tape are
even, then insert up to the knife.
5. Lower the sewing foot making sure that the cording (piping)
is in the groove of the foot.
6. Serge keeping the layers together, the edges even, and the
cording (piping) in the groove.
Thisfoot easily sergesdecorative cording and piping as it finishes
the seamsin one step. It also adds stability as you serge by
keeping the material flat. Choosethe 3mm or 5mm for various
sizesof cording and piping, depending on the look you desire.
cording Foot
5mm (BLe-cF5)
instructions
/