Wi-Fi Antenna Replacement Kit
Installation Instructions for Industrial Printers
Read these instructions thoroughly before installing this kit.
Parts List
Before proceeding, verify that your kit contains the following items. To reorder specific parts, navigate to
zebra.com/parts, and select your printer model.
Antenna, external Wi-Fi, tri-band, RSMA Qty 1
Replace the Wi-Fi Antenna
1. Unscrew the Wi-Fi antenna.
2. Screw the new antenna onto the RF connector (1) that extends from the back of the Wi-Fi card.
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many
jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2022 Zebra
Technologies Corporation and/or its affiliates. All rights reserved. | zebra.com *P1044164-05EN*
P1044164-05EN Rev A
-
1
