Memphis LL2BE Operating instructions

Brand: Memphis

Model: LL2BE

Type: Operating instructions

Memphis LL2BE is a 2-channel line output converter with digital bass restoration that provides enhanced bass compensation for factory speaker systems, restoring bass lost at high volume levels. The device features a simple setup process, allowing users to adjust the enhanced bass level and threshold to achieve the desired bass compensation. With speaker level inputs accepting up to 400 watts RMS, bass enhancement, auto-turn on, 9.

Memphis LL2BE is a 2-channel line output converter with digital bass restoration that provides enhanced bass compensation for factory speaker systems, restoring bass lost at high volume levels. The device features a simple setup process, allowing users to adjust the enhanced bass level and threshold to achieve the desired bass compensation. With speaker level inputs accepting up to 400 watts RMS, bass enhancement, auto-turn on, 9.

AUDIO SINCE 1965

LL2BE

2-CHANNEL LINE OUTPUT CONVERTER

WITH DIGITAL BASS RESTORATION

Connect power, ground, speaker level inputs. When you

turn on the factory audio system, the LL2BE will turn on.

After the LL2BE turns on, it will provide a 12-volt trigger

output to turn on your amplier as well.

DC TURN ON

Factory speaker systems will compress bass at high

volume. The Enhanced Bass Compensation will restore

this loss bass making your music sound as it was intend-

ENHANCED BASS COMPENSATION

1. Turn the system on and play music that has bass.

2. Turn up the volume while you listen for the bass.

3. Listen for the bass to drop o. Once it does, leave

the volume do not adjust the volume level of your

system.

4. Set the ENHANCED BASS LEVEL CONTROL on the

top of the LL2BE to the center.

5. Using a small screwdriver, turn the ENHANCED

BASS THRESHOLD clockwise slowly until you hear

the bass return.

5. Re-adjust the ENHANCED BASS LEVEL CONTROL

on the top of the unit to achieve the proper amount

of bass compensation. Once this is set, your installa-

SETUP

SPECIFICATIONS

Maximum Speaker Level Input

Maximum Preamp Output

Optional Dash Level Control Remote

Frequency Response

Total Harmonic Distortion

Signal to Noise Ratio (Ref to 2Vrms out, unity gain)

Input Impedance

Output Impedance

400 watts per channel @ 4 Ohms

9.8Vrms/13V peak

+0dB / -19dB

33 Hz - 20kHz; ±1dB

1%

-91.3dBA

20K ohms

150 ohms

Speaker Level Input

Bass Enhancement

Option Dash Remote Port

Turn On Selector

Power Connection

Main Output

Bass Enhancement Threshold

Bass Output

(Variable w/ Optional Dash Remote)

FEATURES

• 12Volt trigger out

• Dual amplier options

• Level matching controls

• Optional dash remote level included

SPEAKER LEVEL

• Speaker level inputs accepts up to 400 watts RMS

• Bass compensation

• Selectable auto-turn on

• 9.5V Pre-out

RADIO

MAIN OUTPUT

SUBWOOFER

AMPLIFIER

SUBWOOFER

OPTIONAL REMOTE

RADIO

VARIABLE

BASS OUTPUT

FIXED

OUTPUT

SUBWOOFER

AMPLIFIER

SUBWOOFER

SPEAKERS

FULL RANGE AMP

SINGLE AMPLIFIER WIRING

MULTI AMPLIFIER WIRING

1
2
3
4

Memphis LL2BE Operating instructions

Brand: Memphis

Model: LL2BE

Type: Operating instructions

Memphis LL2BE is a 2-channel line output converter with digital bass restoration that provides enhanced bass compensation for factory speaker systems, restoring bass lost at high volume levels. The device features a simple setup process, allowing users to adjust the enhanced bass level and threshold to achieve the desired bass compensation. With speaker level inputs accepting up to 400 watts RMS, bass enhancement, auto-turn on, 9.

Other documents