KNOP TR303410HF is a pressure switch designed for use in healthcare settings to alert caregivers when a patient needs assistance. It can be placed under a patient's bed or at the door and is activated when pressure is applied. The device communicates wirelessly with compatible receivers, which can display patient information and alert caregivers with visual and audible signals.
KNOP TR303410HF is a pressure switch designed for use in healthcare settings to alert caregivers when a patient needs assistance. It can be placed under a patient's bed or at the door and is activated when pressure is applied. The device communicates wirelessly with compatible receivers, which can display patient information and alert caregivers with visual and audible signals.
© KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkwww.knop.dk+45 97840044
User manual
TR303410HF
TR303417HF
Pressure switch V1.1
© KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkknop.dk+45 97840444
2
Table of contents
Warnings and safety instructions 3
Intended use 4
Commissioning 4
Check the coverage area 4
Changing the battery 5
Spare parts and accessories 5
Technical data 6
Explanation of symbols and approvals 7
Pressure switch V1.1
© KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkknop.dk+45 97840444
3
Warnings and safety instructions
● The battery in this product must comply with the relevant IEC safety standards for
batteries.
● Do not consume or eat the battery, risk of chemical burns.
● Keep new and used batteries away from children.
● If the battery compartment cannot be closed properly, discard the product, and keep
it away from children.
● Read the intended use before use.
Pressure switch V1.1
© KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkknop.dk+45 97840444
4
Intended use
TR30341XHF can be used in front of the bed or at the door.
If the transmitter is coded together with a KNOP 901 series receiver, the patient's name and
apartment number can be displayed if this is coded.
Commissioning
The product is ready to use and only needs to be encoded in the desired receivers.
Check the coverage area
One person activates TR30341XHF (as described above) at short intervals, while another person
systematically walks around the area and marks on a sketch the building and the area where there
is coverage. The sketch is placed in the office so that everyone who needs to use the system can
see where there is coverage.
Outside the coverage area, alarms cannot be received.
The coverage area can be extended by using a repeater system from Knop Elektronik.
Contact your retailer for more information.
Pressure switch V1.1
© KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkknop.dk+45 97840444
5
Changing the battery
TR30341XHF uses a CR2450 lithium battery.
Replace by removing the screws on the back Open the screws on the back of the TR30341XHF
and gently tighten the cover to replace the battery.
When an alarm is sent to an RX901A, B, or C, the display may show "Low Battery" when the
battery needs to be replaced.
Spare parts and accessories
Spare parts and accessories can be ordered from Knop Elektronik A/S at www.knop.dk.
Pressure switch V1.1
© KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkknop.dk+45 97840444
6
Technical data
Order number: TR303417HF, 70x40cm
TR303410HF, 110x70cm
Frequency HF: 869.2125 MHz (FM)
Range: Up to 500 m of an unobstructed view to an RX901B (1)
Battery type: 1 pc. 3V CR2450 type lithium
Operating time (expected): 3 years with 5 transfers per day.
Up to 10 years, with one transfer per day.
Low battery alarm/indicator: 1/3 remaining capacity.
Surrounding environment: Indoor use. ≤ 90% non-condensing
Ambient temperature: 0°C to +40°C
Colour of the cabinet: Colour: Care yellow
Density: IP54
Connections: None
Weight: 3,5kg/8,5kg
Accessories: see knop.dk
The right to make changes is reserved.
All rights reserved.
© KNOP Elektronik A/S
(1) Measured outdoors with an unobstructed view between transmitter and receiver. In buildings, the range is reduced.
Pressure switch V1.1
© KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkknop.dk+45 97840444
7
Explanation of symbols and approvals
This product complies with:
Directive 2017/745/EU MDR
Directive 1907/2006/EU REACH
Directive 2011/65/EU RoHS
ISO 14971:2019 Risk Management for Medical devices
EN 301 498-1 V2.2.3 Electro Magnetic Compatibility
EN 301 489-3 V3.1.1 Electro Magnetic Compatibility
EN 50130-4:2011 + 2014 Immunity alarm systems
EN 300 220-1 V3.1.1 Short Range Devices
EN 300 220-2 V3.1.1 Short Range Devices
EN 300 220-3 V2.1.1 Short Range Devices
EN 60601-1-2:2014 + 2015 Electromagnetic compatibility (Medical)
EN 62368-1:2020 Electrical safety
EN 50581:2012 Hazardous substances
The product must not be used if the packaging is damaged.
Medical Device
Class 1
Manufacturer
KNOP Elektronik A/S, Fabriksvej 20, DK-7600 Struer, Denmark
Read the manual(s) before installation and commissioning.
Interference may occur in an environment with equipment marked with this symbol.
Must be protected against liquids.
0 °C to +40 °C, temperature limit for transport/storage and use.
The product must not be disposed of with normal household waste.
Single Registration Number
DK-MF-000025631
Unique Device Identifier
05744002850496
05744002853497
Product reference/product number/warning text.
TR303417HF
TR303410HF
Serial number
Placed on the product
Ingress Protection Code
IP54
-
1
-
2
-
3
-
4
-
5
-
6
-
7
KNOP TR303410HF User manual
- Type
- User manual
- This manual is also suitable for
KNOP TR303410HF is a pressure switch designed for use in healthcare settings to alert caregivers when a patient needs assistance. It can be placed under a patient's bed or at the door and is activated when pressure is applied. The device communicates wirelessly with compatible receivers, which can display patient information and alert caregivers with visual and audible signals.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Bang & Olufsen Beovox RL User manual
-
-
-
-
-
Bang Olufsen BeoLab 2000 User manual
-
-
-
-
Bang & Olufsen BEO4 Owner's manual