2. Stirling
  3. 504082
504082

Stirling 504082 User manual

  • Hello! I've reviewed the provided document which outlines the setup instructions for a trailer, focusing on key aspects like tongue and fender installation, fork loop removal, and gate display. I am prepared to answer any questions you may have about the setup process.
  • What size bolts are used for tongue installation?
    How many bolts are used for fender installation?
    What is the first step of Fork Loop Removal?
TO SETUP FOR DISPLAY & SALE
1: TONGUE INSTALLATION
2: FENDER AND FENDER LIGHT INSTALLATION
3/8”x6” x 2
3/8” x 2
3/8” x 2
3/8”x¾” x 3
PUT BOTH
FENDER
LIGHT
BULLETS
INTO LOOSE
FEMLAE
BULLETS AS
SHOWN IN
PICTURE
3: FORK LOOP REMOVAL
4: FRONT AND BACK GATE DISPLAY
RECYCLE
RECYCLER
1. Remove Screws x 2
3
2
2
2. Push up towards the center
3. Pull down to remove (Tirer
descendant)
Put latch locks to keep gates up
3. Remove the washer plate
from the inside channel
3. Pull down to remove (Tirer
descendant)
/