2. VEVOR
  3. DNB8.5X27YCLWCHS1V0

VEVOR DNB8.5X27YCLWCHS1V0 User manual

  • Hello! I am an AI chatbot trained to assist you with the VEVOR DNB8.5X27YCLWCHS1V0 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
BOAT MOORING BUOYS
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Be sure to review the contents of this manual before attempting to
operate the equipment. This manual should be located where it
can be easily referenced by all users of themachine.
CustomerSe[email protected]
INFLATING RATE
Please inate the buoy to its standard diameter; over-inating may damage the buoy
or aect its seice life.
INFLATING EQUIPMENT
Users can use the below equipment to inate the buoys. Please use the special ination
needle to inate; otherwise, the unsuitable ination needle will damage the air valve.
INFLATING METHOD
Put the ination needle onto the ination equipment rst, and then inse the needle
into the buoy’s air valve to inate it. Please note that the needle must be inseed
veically and entirely into the air valve; tilting or incompletely inseing will damage
the air valve.
E-mail: CustomerSeice@vevor.com
INFLATION INSTRUCTIONS
BOAT MOORING BUOYS
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Be sure to review the contents of this manual before attempting to
operate the equipment. This manual should be located where it
can be easily referenced by all users of themachine.
CustomerSe[email protected]
INFLATING RATE
Please inate the buoy to its standard diameter; over-inating may damage the buoy
or aect its seice life.
INFLATING EQUIPMENT
Users can use the below equipment to inate the buoys. Please use the special ination
needle to inate; otherwise, the unsuitable ination needle will damage the air valve.
INFLATING METHOD
Put the ination needle onto the ination equipment rst, and then inse the needle
into the buoy’s air valve to inate it. Please note that the needle must be inseed
veically and entirely into the air valve; tilting or incompletely inseing will damage
the air valve.
E-mail: CustomerSeice@vevor.com
INFLATION INSTRUCTIONS
/