Pecron P500 User manual

Brand: Pecron

Model: P500

Type: User manual

This manual is also suitable for

P500/P600 Portable Power Station

https://www.pecron.com

User manual for outdoor power station P500/P600

PORTABLE POWER STATION

Contents

1. Introduction

2. Technical Specifications

3. Function Instruction

4. Using Guideline

5. Warranty

PORTABLE POWER STATIONPORTABLE POWER STATIONPORTABLE POWER STATION

1. Introduction

Thank you for purchasing Pecron P500/P600 outdoor portable power station.

P500/P600 is a portable multiple-use battery-powered/solar generator. It features

light weight, large capacity, and full capability. It provides you with easy access

to power when you are off-the-grid. P500/P600 can be widely used in the field of

mobile working, outdoor recreation, camping, rescuing, environment protection,

emergency communication, power outage backup and so on.

P500/P600 Outdoor Portable Power Station Highlights:

110V/60Hz Pure Sine Wave AC output

DC12V10A output

USB QC3.0*2 (5V3A 9V2.5A) AC output

USB-C*2 (5~9V3A 12V2.25A) AC output

LED Emergency Lighting

Three-Way Charging

Built-In MPPT Charge Controller

Please read the user manual carefully before using, and keep the purchase

receipt as a proof of purchase for any warranty claim.

PORTABLE POWER STATION

2. Technical Specifications

Model No.

P500

P600

Rated power

500W

600W

Peak power

1000W

1200W

Output voltage

AC 220V/50Hz Pure Sine Wave

DC12-14V10A

USB QC3.0*2 (5V3A 9V2.5A)

USB-C*2 (5~9V3A 12V2.25A)

Battery capacity

388.5Wh(25.9V15Ah)

578Wh(25.2V22.95Ah)

Battery type

Lithium ion

Charging time

3~4h

2~3h

Charging voltage

29.4V 5A DC29.4V 9A(MAX)

Car and solar

charging

DC12V cigarette lighter / 18V solar panel (open circuit

voltage is 22V and the maximum input is 100W)

Protection

Over-Voltage, Low-Voltage, Over-Temperature

Over-Load, Short-Circuit

Working

temperature

0℃~45℃for (charging)

-20℃~ 45℃for (discharging)

LED light

LED 2W

Product size

L280*W152*H225mm

Net weight

10.8lbs(4.9Kg)13lbs(5.9Kg)

PORTABLE POWER STATION

3. Function Instruction

Please read the instruction of functions carefully before using to avoid

damage to the unit and it's connected devices.

Packing List

.Charging Adapter

.Charging Cable

.Accessory Bag

.User Manual

3.1 Functions Of Each Part

34 5

PORTABLE POWER STATION

Parts Functions

LCD display (shown as Figure 4, Page 7)

DC Output Switch: Press and hold the DC switch for a while, the USB

ports and DC12V socket will be activated, at the same time, the LCD screen

shows the battery level, estimated discharging time(h), discharge(load)

wattages(shown as Figure1, Page5). Press the DC switch will show the

discharging voltage;

Press and hold the DC switch for a while to deactivate the USB ports and

the DC 12V socket

AC Output Switch: Press and hold the AC switch for a while to activate the

AC output, at the same time, the LCD screen shows the battery level, loading

percentage, estimated discharging time(h), discharge(load) wattages(shown

as Figure2, Page5). Press the AC switch will show the discharging voltage

and PF value(shown as Figure3, Page5).

Press and hold for a while to deactivate the AC outputs.

3.1

Reset: In case of crash or abnormal display, press and hold the AC

switch button for 14 seconds to reset.

USB QC3.0 Ports: Support 5V / 9V fast charging.5V for maximum 3A or 9V

for maximum 2.25A. With overload and short circuit protection.

USB-C Ports: Support 5V / 9V / 12V fast charging. 5V/9V for maximum

3A, or 12V for maximum 2.25A. With overload and short circuit protection.

DC 12V Socket: Support 12 ~ 14V DC output with the maximum

output current 10A. With overload and short circuit protection.

PORTABLE POWER STATION

DC DISPLAY SCREEN

FIGURE 1

AC DISPLAY SCREEN - 1

FIGURE 2

AC DISPLAY SCREEN -2

FIGURE 3

PORTABLE POWER STATION

Parts Functions

DC5521 Input: Supports wide voltage 12V/18V car

charging and solar charging(MPPT charge controller),

with the maximum input 100 watts.

DC GX16-4 Input(1, 2 are positive; 3, 4 are negative):

Support 16mm four-pin aviation plug for DC charging

(29.4V 9A max)

AC Output Socket: when the unit is on, it can produce

110V AC output.

AC Output Socket: when the unit is on, it can produce

110V AC output.

6 7 8 9

PORTABLE POWER STATION

3.2 LCD Intelligence Display

Figure 4 (Intelligence Display)

DC output: When the DC output is turned on, the LCD screen will display "DC OUT", and

the USB ports, 12V DC Socket works.

AC output level: It shows the current loading percentage of the maximum AC output,

100% is fully loaded.

AC output: When the AC output is turned on, the screen will display “AC OUT”, and it will

be able to produce 110V AC output.

Battery level: It shows the remaining battery, each grid represents 20% of the total battery

capacity; and it will flash in a marquee style during charging, and stop flashing when it's

fully charged; The battery icon starts flashing when the unit has less than 10% battery,

please charge the power station immediately.

Battery percentage/battery voltage: The power station will reserve some power to protect

itself from over-discharging even the battery level drop to 0%; When the power station is

loaded with high power consumption devices, the low-voltage alarm will be displayed when

the battery level drop to 10%-20%, please charge the power station immediately.

DC output

Charge

Discharge

Time

Battery level

AC output Level

AC output

Battery percentage(%)/

Battery voltage(V)

Temperature Alarm

Charge/discharge power(Net Value)

AC output Wattage(W)/Voltage(V)

AC overload alarm

PF value/charge and discharge time

PORTABLE POWER STATION

Temperature alarm: When the temperature is too high, the power station will shut down all

output and you will hear five "di" tone; The power station will resume to work when the

temperature falls within its working range.

Charge: When the power station is charging(AC/DC), the LCD intelligence screen will

display .

Discharge: The LCD intelligence screen will display icon to indicate that there is DC

output.

Charge/discharge power: The screen will display the net value of the input and output when

the power station is being charged and discharged at the same time.

AC output wattage/voltage: When the AC output is on, the loaded wattage (W) and voltage

(V) levels of the power station will be displayed.

AC overload alarm: When the total AC output exceeds the rated power(500W/600W),

"Over Load" small icon flashes, and you will hear two "beep" tone, the power station will

shut down all AC outputs.

PF value/charge and discharge time: PF(Power Factor) expresses the ratio of the real

power absorbed by the load to the apparent power flowing in the circuit; The power station

displays the PF value and calculates the remaining working/charging time (in hours)

according to the input and/or output power.

PORTABLE POWER STATION

Parts Functions

LED Lighting Switch: Press the LED lighting switch to

turn on/off the light.

LED Light: The working power of the LED light is 2W,

please do not stare directly into it when the light is on.

Air Vents

11 12

PORTABLE POWER STATION

4. Using Guideline

4.1 Working environment

Dry Use and store the unit only in a cool and dry

environment

Temperature 0℃~45℃ for charging

-20℃~45℃ for discharging

Ventilation Keep the air vents at least 20cm away from any

objects to prevent improper air flow

Safety Do not store, charge or use the unit in an area

exposed to flammable or corrosive gas

4.2 Charging:

(A) Please use Pecron original power adapter to charge, and do not leave the unit unattended

while using. It is recommended to charge the power station without load to prevent

excessive heating. Please plug the charger into the DC charging port first for charging.

When the unit is 100% charged, the charger will still delivery a small voltage to the power

station through trickle charge until the indicator turns green.

(b)When you leave the unit unused for a long period of time, make sure to charge it every 6

months. If the power station has been kept idle for a long time, please charge it to full even

if the battery level shows 100%.

PORTABLE POWER STATION

4.3 AC Output

P500/P600 portable power station support any devices with working power under its rated

power. However, some appliances require extra power to start up; In general, the starting

power for inductive load equipments(e.g. motor, compressor, drill, fluorescent lamps) is

3~8 times higher than its rated power. The BMS will activate the over-load protection and

shut down all outputs if the total output exceeds its working power.

Operation steps:

(1) Turn on AC output.

(2) Check the working power of your device and ensure it’s within P500/P600 rated

power. You can get larger capacity and wattages power stations from www.pecron.com if

P500/P600 does not meet your needs.

(3) Plug into the AC socket and turn on your device.

(4) Turn off the AC output after using.

(5) Please charge your P500/P600 on time when the battery is running low.

When the

battery

running off

, the

total

load exceeds the maximum output

(500W

for P500, 600W for P600),

or the temperature is too high, the power s

tation

will

automatically turn

itself

off.

PORTABLE POWER STATION

5.Warranty

All Pecron products come with a 12-month warranty. The warranty activate

automatically since the date of receiving your Pecron.

Pecron warrants that our product to be free from defects in workmanship and material

under normal consumer use during the applicable warranty period .We will not assume,

nor authorize any person to assume for us, any other liability in connection with the sale

of Pecron products.

Pecron will repair or replace (at our discretion) any Pecron product that fails to operate

during the applicable warranty period due to defect in workmanship or material. If a

valid claim is made during the applicable period, Pecron, at its option, will either(1)

replace the product, or (2) exchange the product with a product that is of equal value. A

replacement product assumes the remaining warranty of the original product. Customer

is responsible for the return shipping costs.

Pecron warranty does not apply to following situations even it’s within warranty period:

*Alter or disassemble the unit.

*Wear/tear on the out surface.

*Misused or abused for anything other than normal consumer use as authorized in Pecron's

current product literature.

* Breakdown or damage caused by natural hazard beyond control (earthquake, fire,

tsunami and etc.)

* Maintenance does not cover the packaging and accessories

We will offer paid service once warranty expired.

PORTABLE POWER STATION

Pecron P500 User manual

Brand: Pecron

Model: P500

Type: User manual

This manual is also suitable for

P500/P600 Portable Power Station

Download PDF

report

Pecron P500 User manual

This manual is also suitable for

Pecron P500 User manual

Related papers

Other documents