Ortech FB-R240SN User manual

Brand: Ortech

Model: FB-R240SN

Type: User manual

WARNING

Floor Metal Box

MODEL FB-R240SN

PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.

Electrical products can cause death or injury, or damage to property.

If in any doubt about the installation or use of this product, consult a competent electrician.

CONTENTS

WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

1. Test if power is OFF at circuit breaker of fuse block

2. Please read the instructions before use

Instruction Manual

1-888-543-6473

1-888-541-6474

13376 Comber Way

Surrey BC V3W 5V9

[email protected]

www.ortechindustries.com

375 Admiral Blvd

Mississauga, ON L5T 2N1

CAUTION

INSTALLATION

1) Tape the template on the

area you want to place

the floor box. Cut the

electrical box into the

subfloor or finished floor,

avoiding floor joists.

2) Remove knockouts. Pull

the wire through the

opening of the floors and

knockouts and connect

wires based on the wiring

diagram. Secure electrical

box with four screws

through outside tabs.

(screws not provided)

3) Wire receptacle in

accordance with the

wiring diagram (Fig.3)

4) Attach gasket support

plate to the receptacle

with #6-32*0.5* screw

5) Place foam gasket on top

of gasket support plate

and datacom

6) Install coverplate using

#6-32*1 1/4" screws

ORTECH reserves the right to modify at any time, without notice, any or all of our product's

features, designs, components and specifications to meet market changes.

Fig.1 Fig.2Fig.4Fig.5

Fig.6

Fig.3 (Wiring Diagram)

Neutral

(White wire)

Hot

(Black wire)

Ground

(Green or bare wire)

Ortech FB-R240SN User manual

Ortech FB-R240SN User manual

Ortech FB-R240SN User manual

Related papers

Other documents