2. YESWELDER
  3. MIG-205DS IGBT INVERTER MULTI FUNCTIONS WELDING MACHINE

YESWELDER MIG-205DS IGBT INVERTER MULTI FUNCTIONS WELDING MACHINE User manual

  • Hello! I've reviewed the provided user manual for the YesWelder MIG-205DS multi-function welding machine. This document details how to configure the device for different welding modes such as CO2/MIG, MAG, MMA, TIG LIFT, and GASLESS FLUX. I am ready to answer your questions about the device and its setup.
  • How to use CO2/MIG or MAG functions?
    How to use Gasless function?
    How to use MMA function?
    How to use TIG LIFT function?
MIG-205DS
Sep, 2020
IGBT INVERTER MULTI FUNCTIONS WELDING MACHINE
(CO2/MIG, MAG, MMA, TIG LIFT, GASLESS FLUX)
1)Using CO2/MIG. MAG functions, please plug Dinse connector into socket and
earth clamp into Socket, plug the welding torch into the on the front panel and screw
it tight. Meanwhile, insert the welding wire into the welding torch by hand from built in
wire feeder.
2)Using Gasless function, connect, please plugDinse connector into socket and
earth clamp into Socket, plug the welding torch into the on the front panel and screw
it tight. Meanwhile, insert the welding wire into the welding torch by hand from built in
wire feeder.
3)Using MMAfunction. plug electrode holder into socket and earth clamp into
Socket
4)UsingTIG LIFT function, plug in the additional WP-17V-35 TIG torch in socket
and earth clamp into Socket
+
-
-
+
+
-
-
+
www.YesWelder.com
/