Wichard 35500 Owner's manual

Hello! I've reviewed the datasheet for the Wichard Snatch block 35500. This document provides details on its features, such as the free rotation snap shackle, strong closing system, and shock-resistant design. It also specifies the working and breaking loads. I'm ready to answer any questions you have about it.
What is the maximum rope size for this snatch block?

What is the working load for nautical applications?

What is the breaking load of this snatch block?

What is the safety factor of this snatch block?

Snatch block with snap shackle - Max rope size 18 mm

Part #35500

Descr ip tionDescr ip tion

Free rotation thanks to snap shackle

Very strong closing system

Easy opening by simply pulling on the plunger pin.

Shock and scratch-resistant thanks to the elastomer

moulded cheeks

Ap p licationsAp p lications

Changing sheets

Spinnaker sheet deflector blocks

Cap tionCap tion

Working load (WL) : for nautical applications

Working Load Limit (WLL): for industrial

applications only.

The safety factor is 5 times the breaking load.

WLL = Breaking load / 5

Technical in formationTechnical in formation

Materials HR 17.4 PH forged stainless steel arm

Elastomer moulded cheeks

Composite sheave

Rope size Rope size: 23/32

Length (inch) 6 7/64"

Width (inch) 2 21/64"

Thickness (inch) 1 59/64"

Working load (lb) 2640

Breaking load (lb) 5510

Weight (lb) 0.913

Wichard strives to ensure, to the best of its ability, the accuracy and the update of the information disseminated on this document, and reserves the right to correct at any time and without

notice the content, as well as to evolve its products.

In the case of an industrial application, please contact our sales and technical department to validate the use of these products. The request for certificates can be made directly with the