PLT PremiumSpec LED Flood Light Fixture Installation guide
- Type
- Installation guide
PLT PremiumSpec LED Flood Light Fixture delivers exceptional illumination with its high-power LED technology, providing unmatched brightness and energy efficiency. Its adjustable CCT (Correlated Color Temperature) allows you to customize the lighting ambiance from warm to cool white, catering to diverse application needs. The robust construction and IP65 rating ensure reliable performance in various outdoor settings, making it ideal for illuminating building facades, parking lots, sports fields, and security areas.
PLT PremiumSpec LED Flood Light Fixture delivers exceptional illumination with its high-power LED technology, providing unmatched brightness and energy efficiency. Its adjustable CCT (Correlated Color Temperature) allows you to customize the lighting ambiance from warm to cool white, catering to diverse application needs. The robust construction and IP65 rating ensure reliable performance in various outdoor settings, making it ideal for illuminating building facades, parking lots, sports fields, and security areas.
1
972-535-0926 | pltsolutions.com | ver 1123
22
COLOR SELECTABLE LED FLOOD LIGHT FIXTURE
SAFETY AND INSTALLATION INSTRUCTIONS
؍
؍
WARNING
xBefore installing, servicing, or performing routine maintenance upon this equipment, follow these general
precautions.
xTo reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts,
cuts/abrasions, and other hazards, read all warnings and instructions included with
and on the fixture box and
all fixture labels.
xProper grounding is required to ensure safety.
xPower must be turned off at the breaker before installation or maintenance.
xThis product must be installed in accordance with the applicable installation code by a person familiar with
the construction and operation of the product and the hazards involved.
xWear gloves and eye protection at all times while installing, servicing, or performing maintenance on the
luminaire, and avoid direct eye exposure to the light source while it is on.
xDo not install damaged product. Inspect luminaire for damage that may have occurred during transit. If
damaged, contact the manufacturer immediately.
xThese instructions do not purport to cover all details or variations in equipment nor to provide every possible
contingency to meet in connection with installation, operation, or maintenance. Should further information be
desired or should particular problems arise which are not covered sufficiently for the purchaser’s or owner’s
purposes, contact the manufacturer.
؍
؍
ADVERTENCIA
xAntes de instalar, reparar o realizar el mantenimiento de rutina de este equipo, siga estas precauciones
generales.
xPara reducir el riesgo de muerte, lesiones personales o daños a la propiedad por fuego, descarga eléctrica,
caída de piezas, cortes / abrasiones y otros peligros, lea todas las advertencias y
instrucciones incluidas con
y en la caja del dispositivo y todas las etiquetas del dispositivo.
xSe requiere una conexión a tierra adecuada para garantizar la seguridad.
xSe debe apagar la energía en el disyuntor antes de la instalación o el mantenimiento.
xEste producto debe ser instalado de acuerdo con el código de instalación aplicable por una persona
familiarizada con la construcción y operación del producto y los peligros involucrados.
xUtilice guantes y protección para los ojos en todo momento durante la instalación, el servicio o el
mantenimiento de la luminaria, y evite la exposición directa de los ojos a la fuente de luz mientras está
encendida.
xNo instale un producto dañado. Inspeccione la luminaria en busca de daños que puedan haber ocurrido
durante el tránsito. Si está dañado, comuníquese con el fabricante de inmediato.
xEstas instrucciones no pretenden cubrir todos los detalles o variaciones en el equipo ni proporcionar todas
las posibles contingencias a cumplir en relación con la instalación, operación o mantenimiento. Si desea
obtener más información o si surgen problemas particulares que no están suficientemente cubiertos para los
propósitos del comprador o propietario, comuníquese con el fabricante.
؍
؍
AVERTISSEMENT
xAvant d'installer, d'entretenir ou d'effectuer une maintenance de routine sur cet équipement, veuillez suivre
ces précautions générales.
2
972-535-0926 | pltsolutions.com | ver 1123
22
COLOR SELECTABLE LED FLOOD LIGHT FIXTURE
SAFETY AND INSTALLATION INSTRUCTIONS
xPour réduire le risque de décès, de blessures corporelles ou de dommages matériels dus à un incendie, un
choc électrique, des chutes de pièces, des coupures/abrasions et d'autres dangers, lisez tous les
avertissements et les instructions inclus avec et sur la boîte du luminaire et toutes les étiquettes des
luminaires.
xUne mise à la terre appropriée est requise pour assurer la sécurité.
xL'alimentation doit être coupée au niveau du disjoncteur avant l'installation ou l'entretien de cet équipement.
xCe produit doit être installé conformément au code d'installation applicable par une personne familière avec
la construction et le fonctionnement du produit et les risques impliqués
xPortez des gants et des lunettes de protection à tout moment lors de l'installation, de l'entretien ou de la
maintenance du luminaire, et évitez de regarder directement la source lumineuse lorsqu'elle est allumée.
xN'installez pas de produit endommagé. Inspectez le luminaire pour vérifier s’il présente des dommages qui
ont pu se produire pendant le transport. S'il est endommagé, contactez immédiatement le fabricant.
xCes instructions ne prétendent pas couvrir tous les détails ou variations de l'équipement ni fournir toutes les
éventualités possibles que vous pourriez rencontrer en rapport avec l'installation, l'exploitation ou la
maintenance. Si vous souhaitez des informations supplémentaires ou si des problèmes particuliers
surviennent et qu’ils ne sont pas suffisamment couverts pour les besoins de l'acheteur ou du propriétaire,
contactez le fabricant.
WARNING
xIn the event of smoke or fire, turn off the power immediately and call a licensed electrician.
CAUTION
xRead the installation instruction carefully before installation of fixture.
xDo not use an electric generator to test this fixture.
xMin 75°C supply conductors
Installation Instructions
Fixture with ½” Knuckle Mount (15W, 25W, 35W, 60W)
1. Connect the line (positive), neutral (negative), and ground wires to power.
2. Loosen the screws and adjust the fixture to the desired position before tightening (Figure 1.1) to the desired
position.
3
972-535-0926 | pltsolutions.com | ver 1123
22
COLOR SELECTABLE LED FLOOD LIGHT FIXTURE
SAFETY AND INSTALLATION INSTRUCTIONS
Fixture with Yoke Mount (15W, 25W, 35W, 60W, 80W, 105W)
1. Connect the line (positive), neutral (negative), and ground wires to power.
2. Loosen the screws and adjust the fixture on the yoke before tightening (Figure 2.1, Figure 2.2) to the desired
position.
Fixture with Slip Fitter Bracket (80W)
1. Run the line (positive), neutral (negative), and ground wires through the mounting head of the bracket.
2. Connect the wires to power and place the slip fitter on support pole and tighten the screws.
3. Loosen the fixtures’hexagonal screw (Figure 3.1) and position the fixture before tightening again.
Fixture with Trunnion Mount (140W)
1. Connect the line (positive), neutral (negative), and ground wires to power.
2. Loosen the screws and adjust the fixture on the trunnion before tightening (Figure 4.1, Figure 4.2) to the
desired position.
4
972-535-0926 | pltsolutions.com | ver 1123
22
COLOR SELECTABLE LED FLOOD LIGHT FIXTURE
SAFETY AND INSTALLATION INSTRUCTIONS
Fixture with Slip Fitter (105W, 140W)
1. Run the line (positive), neutral (negative), and ground wires through the mounting head of the bracket.
2. Connect the wires to power and place the slip fitter on support pole and tighten the screws.
3. Loosen the fixtures’hexagonal screw (Figure 5.1) and position the fixture before tightening again.
CCT Selection
Open the metal plug as indicated on Figure 6.1 to expose the CCT Selection switch (Figure 6.2). After setting the
desired color temperature (Figure 6.3), tighten the metal plug counterclockwise (Figure 6.4).
-
1
-
2
-
3
-
4
PLT PremiumSpec LED Flood Light Fixture Installation guide
- Type
- Installation guide
PLT PremiumSpec LED Flood Light Fixture delivers exceptional illumination with its high-power LED technology, providing unmatched brightness and energy efficiency. Its adjustable CCT (Correlated Color Temperature) allows you to customize the lighting ambiance from warm to cool white, catering to diverse application needs. The robust construction and IP65 rating ensure reliable performance in various outdoor settings, making it ideal for illuminating building facades, parking lots, sports fields, and security areas.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Other documents
-
PLT SOLUTIONS CCT Selectable LED Track Heads User manual
-
PLT SOLUTIONS Twin Head LED Emergency Light User manual
-
SUNCO MHB06_215W Installation guide
-
Howard UF User manual
-
PLT SOLUTIONS Color Selectable LED Exit Sign Operating instructions
-
PLT SOLUTIONS LED Wraparound Fixture User manual
-
RAB X17FA140SF X17 FA Field Adjustable Dusk to Dawn LED Flood Light Operating instructions
-
PLT SOLUTIONS Selectable LED Track Lighting User manual
-
PLT SOLUTIONS LS-PLTS-12333 User manual
-
Satco 65-843-4 Operating instructions
