Wontide MADR1505 User manual

Instruction Manual

Hydraulic Drum Handler WTD-DT350A

WTD-DT350A

Note: Operator must read and understand this Instruction Manual

before using.

DT350 series Hydraulic Drum Handler

Preface

l. In order to make the users quickly understand the structure and

performance features of this product, so as to carry out regular

maintenance as well as correct regulation of vehicle, our factory hereby

compile this operation instruction sheet as well as spare parts table for

users' reference.

2. Read the instruction sheet and parts table carefully before using and

make clear the structural performance, Maintenance as well as attentions.

3. The personnel without license cannot operate the drum handler. Only

those qualified personnel with professional training as well as approved

by relevant departments and familiar with the structural performance can

independently operate the vehicle.

4. The work site of drum handler shall be flat, solid place with enough

loading capacity.

5. Our company will not hold any responsibility for the modification of

drum handler by users without the prior approval of our company.

Table of Contents

1、Preface

2、Brief introduction

3、Main technical performance and parameter

4、Technical Data

5、Safety operation

6、Maintenance

1、Brief Introduction

As a popularly used Pallet loading barrel movers, our V-shaped Drum

handler, drum handling equipment, Drum Transporters / Drum Palletizers

/ Drum Movers is used to transport drums, and move 350kg rimmed steel

and plastic drums on and off pallets up to 300mm high. This equipment is

commonly used to lift and transport and place drums on and off pallets,

spill containment pallets in upright position, and drum dollies. Drum

handlers are usually made of heavy duty metals with smooth coating. The

V-Shaped base of these drum movers allows you to raise and place a

drum at the corner of pallets.

2. Main Technical Performance and Parameter

2.1 Drawing

2.2. Feature of Hydraulic Drum handler

1. With V-shaped base to easily place drums on & off the corner of a

pallet;

2. Two rigid and one swivel caster;

3. Rear locking caster for safety operation;

4. Load capacity 350kg;

5. Designed for lifting, transporting and placing 55 gallon rimmed steel

drums and 200L rimmed plastic drums;

6. Exclusive Eagle-grip structure will not drop the drum during the

transportation;

7. Foot operated hydraulic pump;

8. Swivel casters with precision roller bearings provide maximum

maneuverability, even in confined areas

9. Transport drums, and move rimmed drums on and off pallets up to

300mm high;

3、Technical Data

Model

V-shaped Drum Handler, Drum Carrier DT350A

Load capacity

kg

350

Net weight

kg

50

Wheel Dimension (Front / Rear)

mm

Ø150*50 / Ø125*50

Inner/Outer Width of Front Leg

mm

690 / 890

Outline Dimension

mm

920*890*1130

Lifting Height

mm

300

4、Safety operation

Operation of electric drum dumper

1.Open the anchorear, adjust the lock ring-pull, making the anchor

ear hold tightly the drum which need be transported. The plastic dr

um should use limiting stopper.

2.It can customize pedal and manually type, lifting the drum to the

specified height. It can manually rotate 360 degree.

5. Maintenance

Weekly inspection

1. Check and screw up bolts and nuts;

2. Add butter to the UPC bearing every week regularly;

3. Change oil every a half year;

Wontide MADR1505 User manual

Wontide MADR1505 User manual

Related papers

Other documents