Instruction Manual
Hydraulic Drum Handler WTD-DT350A
WTD-DT350A
Note: Operator must read and understand this Instruction Manual
before using.
DT350 series Hydraulic Drum Handler
Preface
l. In order to make the users quickly understand the structure and
performance features of this product, so as to carry out regular
maintenance as well as correct regulation of vehicle, our factory hereby
compile this operation instruction sheet as well as spare parts table for
users' reference.
2. Read the instruction sheet and parts table carefully before using and
make clear the structural performance, Maintenance as well as attentions.
3. The personnel without license cannot operate the drum handler. Only
those qualified personnel with professional training as well as approved
by relevant departments and familiar with the structural performance can
independently operate the vehicle.
4. The work site of drum handler shall be flat, solid place with enough
loading capacity.
5. Our company will not hold any responsibility for the modification of
drum handler by users without the prior approval of our company.
Table of Contents
1、Preface
2、Brief introduction
3、Main technical performance and parameter
4、Technical Data
5、Safety operation
6、Maintenance
1、Brief Introduction
As a popularly used Pallet loading barrel movers, our V-shaped Drum
handler, drum handling equipment, Drum Transporters / Drum Palletizers
/ Drum Movers is used to transport drums, and move 350kg rimmed steel
and plastic drums on and off pallets up to 300mm high. This equipment is
commonly used to lift and transport and place drums on and off pallets,
spill containment pallets in upright position, and drum dollies. Drum
handlers are usually made of heavy duty metals with smooth coating. The
V-Shaped base of these drum movers allows you to raise and place a
drum at the corner of pallets.
2. Main Technical Performance and Parameter
2.1 Drawing
2.2. Feature of Hydraulic Drum handler
1. With V-shaped base to easily place drums on & off the corner of a
pallet;
2. Two rigid and one swivel caster;
3. Rear locking caster for safety operation;
4. Load capacity 350kg;
5. Designed for lifting, transporting and placing 55 gallon rimmed steel
drums and 200L rimmed plastic drums;
6. Exclusive Eagle-grip structure will not drop the drum during the
transportation;
7. Foot operated hydraulic pump;
8. Swivel casters with precision roller bearings provide maximum
maneuverability, even in confined areas
9. Transport drums, and move rimmed drums on and off pallets up to
300mm high;
3、Technical Data
Model
V-shaped Drum Handler, Drum Carrier DT350A
Load capacity
kg
350
Net weight
kg
50
Wheel Dimension (Front / Rear)
mm
Ø150*50 / Ø125*50
Inner/Outer Width of Front Leg
mm
690 / 890
Outline Dimension
mm
920*890*1130
Lifting Height
mm
300
4、Safety operation
Operation of electric drum dumper
1.Open the anchorear, adjust the lock ring-pull, making the anchor
ear hold tightly the drum which need be transported. The plastic dr
um should use limiting stopper.
2.It can customize pedal and manually type, lifting the drum to the
specified height. It can manually rotate 360 degree.
5. Maintenance
Weekly inspection
1. Check and screw up bolts and nuts;
2. Add butter to the UPC bearing every week regularly;
3. Change oil every a half year;
/
