XO WS-007 Wireless Bluetooth Speaker Operating instructions

Type
Operating instructions
FCC ID2ADK3XO-9980
Functions:
1.Vol-/Previous Track
2.Play/Pause/Power Button
3.Vol +/Next Track
4. Microphone
5.Type-C charging port
6. USB-A output
7.UV Phone Sanitizer
Tech Specifications:
Input voltage: DC 5V/2A,
USB- A output:5V/2A(max)
Pairing Name: “UV Light Speaker
**Connecting to Power
• Place the product on a flat, solid, stable surface.
• Plug the small connector of the included power cable into the power port on the back of the
product.
• Plug the large connector into a USB power source, such as the USB port on a computer or into a
compatible 5V/2A USB adapter (not included) and plug into a wall socket.
1. Bluetooth Setup:
Press and hold power button to turn ON the speaker ,LED Indicator will flash BLUE
when in pairing mode. Turn on the Bluetooth function on mobile device, Select UV
Light Speakerpairing name.
LED will turn solid BLUE if successfully paired, Speaker will automatically pair if the
mobile device has been paired before.
If disconnect Bluetooth after 5 mins, the speaker Bluetooth will auto shut off.
Long press Power button to turn off the speaker.
Playing Music:
Long press the speaker power button to power on the speaker, a tone prompt and
Blue LED quick flash, a tone prompt and Blue LED will keep on after connect
Bluetooth.
Short press Play/Pause button to Play/Pause music.
Short press +/- button to control volume increase/decrease, long press to control
next /previous track.
Double press the voice button to activate HI SIRI/Google assistant functions.
Call Function:
When there's an incoming call, short press the phone button to answer a call, press it
again to end the call. Long press to reject a call,double press the button redial.
**How to Use the UV Sanitizer
1 .Plug in the TYPE-C cable.
2 .Open the Case and place your device inside of the case.
3. Make sure the case is closed.
4. There are two UV sanitize modes :
*3mins sanitizing mode: Short press the UV button , the red light on top cover will light up, the UVC
LED inside the box will light up for 3mins. The red light will flash 3times when sanitizing finished and
light will turn off;
*5mins sanitizing mode: Double press the UV button, the green light on top cover will light up, the
UVC LED inside the box will light up for 5mins . The green light will flash 3times when sanitizing
finished and light will turn off.
5. Once the UV sanitizer completely finishes sanitizing, open the lid, flip your device over, and repeat
the sanitization process again for the other side of your device.
This device is designed to limit human & animal exposure to UV-C light, as it is harmful to skin and
eyes. This device is equipped with a safety feature that automatically shuts the UV-C light off when
the lid is opened.
Safety Precautions
• This product is NOT a toy, keep away from children and pets.
• Only use the device according to the instructions in this manual. Never use the device for anything
other than its intended purpose.
• This device is NOT a substitute for proper medical equipment or attention.
• ONLY use the supplied power cable.
• Do not open this product or attempt to repair the unit yourself if it is not working properly. Doing so
risks fire, shock or injury.
• The device contains a safety feature that powers it off automatically
when
the
cover
is
opened.
Do
NOT
disable
this
safety
feature.
FCC
Warnning:
This equipment has been tested and found to comply with the
limits for a Class B digital device,
Pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.• Consult the dealer or an
experienced radio/TV technician for help.
Caution: Any changes or modications to this device not explicitly
approved by manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
  • Page 1 1
  • Page 2 2
  • Page 3 3

XO WS-007 Wireless Bluetooth Speaker Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI