Black Box LMC213A-MMSC-R2 Datasheet

LMC213A-MMSC-R2
Black Box
Brand
Black Box
Model
LMC213A-MMSC-R2
Category
Network media converters
Type
Datasheet

This manual is also suitable for

The Black Box LMC213A-MMSC-R2 is a media converter that enables the connection of 100BASE-FX multimode fiber to 100BASE-TX copper. It supports auto-negotiation for full- and half-duplex operation on the copper port, and features a DIP switch for manual speed and duplex selection. The fiber port operates at 1300nm wavelength and uses a SC connector. The converter supports distances of up to 2km (1.2 miles) on multimode fiber.

The Black Box LMC213A-MMSC-R2 is a media converter that enables the connection of 100BASE-FX multimode fiber to 100BASE-TX copper. It supports auto-negotiation for full- and half-duplex operation on the copper port, and features a DIP switch for manual speed and duplex selection. The fiber port operates at 1300nm wavelength and uses a SC connector. The converter supports distances of up to 2km (1.2 miles) on multimode fiber.

© 2010. All rights reserved. Black Box Corporation.
FREE 24-hour Tech Support: 724-746-5500
blackbox.com
1 of 6
05/14/2010
#24868
FlexPoint Modular Media Converters
The flexible media converter solution
that grows with your network.
724-746-5500 blackbox.com
BL A C K B O X
®
2 of 6
05/14/2010
#24868
Link different media types together in one local area network.
» More interface choices than any other media
converter system.
» Easy installation—no software required.
» FlexPoint Media Converters work as standalone
or hot-swappable chassis-based media
converters.
» The FlexPoint Power Chassis holds up to 14
media converters and features single or dual
hot-swappable AC or DC power supplies.
FEATURES
FlexPoint
™
Modular Media Converters from Black Box provide the
ultimate in flexibility and reliability for your expanding multimedia
LAN. These standalone converters are also chassis-based modules!
Plus, FlexPoint offers you more interface options than any other
media converter system. Your choices include:
•Ethernet
•GigabitEthernet
•TokenRing
•UTP
•Single-modefiber
•Multimodefiber
•Coax
•10/100rateconverters
•Single-modetomultimodefiberconverters
•Long-distancefiberconverters
•ATMOC-3
•ATMOC-12
FlexPoint Media Converters make it easy to expand your networks
as your company grows. The incredible variety and versatility of this
system make it ideal for networks that are subject to constant
upgrades and changes.
OVERVIEW
FlexPoint 14-Slot
Power Chassis (LMC200)
FlexPoint Modular Media Converter,
1000BASE-T to 1000BASE-SX,
Multimode, 850-nm, 220 m, SC
(LMC1003A-R3)
FlexPoint Modular Media Converter,
1000BASE-T to 1000BASE-LX,
Single-Mode, 1300-nm,
10 km, SC (LMC1004A-R3)
FlexPoint Modular Media
Converter, 1000BASE-T to
1000BASE-LX, Single-Mode,
1300-nm, 10 km, SC
(LMC1004A-R3)
Gigabit Switch
File Server
Multimode
Fiber Cable
Multimode Fiber Cable
Single-Mode Fiber Cable
Single-Mode Fiber Cable
File Server
10/100 Switch with
Gigabit Fiber Uplink
10/100 Switch with Gigabit Fiber Uplink
10/100 Switch with Gigabit Fiber Uplink
LEDsoneachFlexPoint Media Converter display status.
Tailorthesystemtoyourrequirements:Getthemediaconverters
you need now and use them individually. Then, when your LAN
grows, mount your media converters on the wall, in the 5-Position
RackmountingKit,asmodulesinthePowerChassis,oronaDINrail.
ThePowerChassisholds14mediaconvertersandaSingleorDualAC
orDCPowerSupply.
10BASE-T to BNC
Thismediaconverterjoinsunshieldedtwisted-pair(UTP)andcoax
LANs together to form one network.
ForUTP,the10BASE-T/BNCconvertersupportsCategory3,4,
and5wiringatdistancesof328feet(100m).Thismodelalsocorrects
wiring-polarity reversals and eliminates crossed cables with a crossover
switch.
For coax, this converter has a BNC connector that supports
50-ohmcableatupto607feet(185m).Andyoudon’tneed
a T-connector—switch-selectable termination is built in.
10BASE-FL to BNC
These10BASE-FLto10BASE2mediaconvertersconnectaThinNet
LAN to fiber to form one network.
724-746-5500 blackbox.com
BL A C K B O X
®
3 of 6
05/14/2010
#24868
Forfiber,theseconvertersuseSTconnectors.Theycomein
850-nmmultimode,1300-nmmultimode,and1300-nmsingle-
modemodels.Thefiberlengthislimitedto1.2miles(1.9km)
perIEEE802.3timing.
Onthecoaxside,theconvertershaveBNCconnectorsand
support50-ohmcableatdistancesofupto607feet(185m).You
canconnectupto30workstationstothissegmentperthe802.3
IEEEstandard.
A switch-selectable terminator is built in.
10BASE-T to 10BASE-FL
Thesemediaconvertersjoinunshieldedtwisted-pair(UTP)
and fiber LANs into one network. They support half- and full-duplex
(10-and20-Mbps)operation.
Forfiber,theseconvertersuseSCorST
®
connectorsin850-nm
multimode,1300-nmmultimode,1300-nmsingle-mode,or1550-nm
single-mode.
ForUTP,thesemediaconvertersuseanEIA/TIAmodular568
RJ-45connectorandsupportCategory3,4,and5wiring,connecting
atdistancesupto328feet(100m).
10BASE-Tto10BASE-FLconvertersalsocorrectwiring-polarity
reversals and eliminate crossed cables with a crossover switch.
100BASE-TX to 100BASE-FX
ThisgroupofmediaconvertersconnectsFastEthernet100BASE-
FXfiberto100BASE-TXUTPLANs.Theyuseauto-negotiationfor
full- and half-duplex operation and can handle numerous fiber types.
These converters auto-adapt to the highest performance level
supportedbythedevicethatisconnectedtotheUTPport.Whenthe
device supports full-duplex, the converter adapts to full-duplex mode
andcreatesa200-Mbpsbandwidth.Whentheconnecteddevice
supports only half-duplex, the converter adapts to this mode and
createsa100-Mbpsbandwidth.Full-andhalf-duplexoperation
can also be controlled by a manual override switch.
Thefibersideoftheseconvertersoperatesat1300nmor1500
nmandusesSTorSCconnectors.Multimodemodelscansupport
distancesofupto1.2miles(2km),andthesingle-modemodels
canoperateatdistancesof68.4miles(110km).
TheUTPport,whichsupportsdistancesofupto328feet
(100m),hasamodular568RJ-45connectorforCategory5wiring.
A crossover switch eliminates the need for crossed cables.
Gigabit UTP to Fiber
UseFlexPointGigabitUTPtoFiberMediaConverterstoconvert
GigabitEthernet1000BASE-Tunshieldedtwisted-
pair(UTP)cableto1000BASE-SXsingle-or1000BASE-LXmultimode
fiber.TheconverterscomplywiththeIEEE802.abstandard.
Theconvertersauto-adapttothefull-/half-duplexandflow-control
servicessupportedbythedeviceconnectedtoitsUTPport.User-
selectable override options set the desired mode.
The converters operate in full-duplex to provide an effective
2-Gbpsdatarateorinhalf-duplexmodetoprovidea1-Gbpsrate.
This maximizes the throughput when connecting to high-bandwidth
full-duplex services such as servers or switches.
Network flow control is supported via an auto-selected or user-
selected “Pause” function that helps relieve network congestion
by providing “backpressure” to the sending device.
Theconvertersupports850-nm(SX),1300-nm(LX),or1550-nm
fiberandusesSC,MT-RJ,orLCconnectors.TheMultimodeSX
supportsdistancesofupto722feet(220m);thesingle-modemodels
supportdistancesofupto40.4miles(65km).
User-selectableLinkPropagationisavailableforSpanning-Tree
redundantnetworkarchitecturesaswellasforconnectingtoSNMP
or other network-managed devices that monitor link availability.
A user-selectable override is provided to isolate the link detection
to a per-segment basis.
Theconverter’sUTPportusesamodularEIA/TIA568RJ-45
connector and supports Category 5 or higher wiring with distances
ofupto328feet(100m).Automaticpolaritydetectionandcorrection
assists in network installation and maintenance.
Token Ring UTP/Fiber
ForTokenRingLANswithfiber-to-copperconversions,these
models automatically sense and configure themselves to the network
ring speed. They also self-configure to attached devices through an
automatic sensing circuit.
TheUTPportcanattachtoaworkstation’snetworkinterfacecard,
ring-in/ring-outport,orlobe.Thisconvertercanalsosupportserver
or workstation fiber attachments and fiber ring extensions.
Category3,4,and5wiringcanbeused.At16Mbps,Category5
wiringcansupportdistancesof492.1feet(150m).At4Mbps,
Category5wiringwillsupportdistancesof1604.4feet(489m).With
fiber,theconvertersupports1.6miles(2.6km)usingmultimodefiber
and12.4miles(20km)usingsingle-modefiber.
These models also test cable integrity in the network.
100-Mbps Fiber-to-Fiber Mode Converters
Multimode-to-Single-Modeconvertersconnecttothenetwork
over multimode fiber. But between Media Converters, they connect
withsingle-modefibertogiveyoudistancesupto36.1miles
(58.1km).
Multimode-to-Multimode versions extend your network up to
3.1miles(5km).
100-MbpsFiber-to-FiberModeConverterssupportTokenRing,
Ethernet,andFastEthernet.
1000-Mbps Multimode-to-Single-Mode
1000-MbpsMultimode-to-Single-Modeconvertersconnect
to the network over multimode fiber and extend the network with
single-modefiber.Theysupportsingle-modedistancesupto31.1
724-746-5500 blackbox.com
BL A C K B O X
®
4 of 6
05/14/2010
#24868
miles(50km).TheconverterscomplywithIEEE802.3and1000BASE-
LX/SXstandards.
Mode Converters for ATM OC-3 and OC-12
ModeConvertersforATMsupportOC-3orOC-12standards
overATMnetworksandtheSynchronousOpticalNETwork(SONET).
They’reperfectforextendinglinedropsinlargecorporations,
regional and national telco switching offices, and other intercampus
telecommunication systems.
TheFlexPointOC-3Single-ModetoMultimodeFiberConverter
provides155-Mbpsconnectionstoextendnetworkdistancesby
connecting multimode fiber networks or devices over single-mode
fiber cabling.
TheFlexPointOC-12Single-ModetoMultimodeFiberConverter
provides622-Mbpsconnectionstoextendnetworkdistancesby
connecting multimode fiber networks or devices over single-mode
fiber cabling.
LEDsreporttheavailabilityofpowerandthedetectionofdevices
attached to the fiber ports.
10/100 Rate Converters
ThisgroupofrateconvertersconnectsFastEthernet100BASE-FX
fiberto10BASE-Tor100BASE-TXUTPLANs.Theyuseautonegotiation
for full- and half-duplex operation and can handle numerous fiber
types. An override switch provides total manual control over the
10/100operationoftheUTPportandthehalf-/full-duplexoperation
ofboththefiberandUTPport.
Thefiberportoperatesat1300or1550nm(dependingonthe
model)andfeaturesSC,ST,orMT-RJconnectors.Multimodemodels
supportdistancesof1.2miles(1.9km),andsingle-modemodels
supportupto16.8miles(27km).Long-haul(LH)modelssupport
distancesofupto34.8,51,or60miles(56,82,or96.6km).
Theseconvertersalsofeaturea1MBstore-and-forwardbuffer
and MAC address learning.
T1/E1 Copper to Fiber Line Drivers
FlexPointT1/E1CoppertoFiberLineDriversconvertcoaxand
twistedpairtomultimodeorsingle-modefiber—andtheyextendT1/
E1overfiber.
T1/E1CoppertoFiberLineDriversfeatureacrossoverswitchon
theRJ-45/RJ-48portforeasyconnectionstoequipment.Dryrelay
contactsonPins3and6oftheRJ-45connectorprovideconnection
to alarm equipment. The contact closes when the signal is lost on
the copper or fiber connection.
LEDsdisplaytheT1/E1linkstatus,diagnosticmodesofoperation,
and line segment errors.
ThelinedriverssupportAMI,B8ZS,andHDB3linecodes.
ToinstallanyoftheconvertersonaDINrail,selecttheDINRail
MountingKit(LMC207-DRM).
TECH SPECS
Power Chassis:
Indicators —LED:(1)Power
Power —LMC200:115–230-VAC,50–60-Hz,autosensingsinglepower
 supply;
LMC200-2PS:115–230-VAC,50–60-Hz,autosensingdualpowersupply;
LMC200A-DC:48-VDC,singlepowersupply;
LMC200A-2PS-DC:48-VDCdualpowersupply
Size —3"Hx19"Wx10"D(7.6x48.3x25.4cm)
Weight —7lb.(3.2kg)
5-Position Rackmounting Kit:
Size —1.75"(1U)Hx19"Wx5"D(4.4x48.3x12.7cm)
Weight —2lb.(0.9kg)
Modules:
CE Approval — Yes
Power —110-VAC,60-Hz,externalpowersupply(230-VAC,
50-Hzversiononrequest)orfromPowerChassis
Size —1"Hx3"Wx4"D(2.5x7.6x10.2cm)
Weight —0.4lb.(0.2kg)
What’s included
Media Converter Chassis (LMC200, LMC200A-DC,
LMC200-2PS, LMC200A-2PS-DC):
✦ Chassis
✦ Power cord
✦User’smanual
Media Converter Modules:
✦ Converter
✦ Power supply
✦User’smanual
724-746-5500 blackbox.com
BL A C K B O X
®
5 of 6
05/14/2010
#24868
LMC200:
shown with modules
LMC205:
shown with modules
Item Code
FlexPoint14-SlotPowerChassis
SinglePowerSupply
115–230VAC
LMC200
48VDC
LMC200A-DC
DualPowerSupply
115–230VAC
LMC200-2PS
48VDC
LMC200A-2PS-DC
5-PositionRackmountingKit—NonpoweredRack
HoldsuptoFiveFlexPointMediaConverters
LMC205
WallmountingHardwareforSingle
FlexPoint Media Converter
LMC206-WALL
FlexPoint Media Converter Modules
ThinNet
10BASE-T/BNC
LMC210A
10BASE-FL/BNC
850-nm,Multimode,2km
ST
LMC211A-MM
1300-nm,Multimode,2km
ST
LMC211A-13MM
1300-nm,Single-Mode,2km
ST
LMC211A-SM
10-MbpsUTPtoFiber
10BASE-Tto10BASE-FL
850-nm,Multimode,2km
ST
LMC212A-MM-R3
SC
LMC212A-MM-SC-R2
1300-nm,Multimode,5km
ST
LMC212A-13MM-R2
1300-nm,Multimode,15km
ST
LMC212A-SM-R3
1300-nm,Single-Mode,28km
ST
LMC212A-SM-LH-R2
1550-nm,Single-Mode,85km
SC
LMC212A-SM-XLH
1550-nm,Single-Mode,110km
SC
LMC212A-SM-SLH
100-MbpsUTPtoFiber
100BASE-TXto100BASE-FX
1300-nm,Multimode,2kmFullDuplex,412m
Half-Duplex
ST
LMC213A-MMST-R2
SC
LMC213A-MMSC-R2
MT-RJ
LMC213A-MMRJ
1300-nm,Single-Mode,25km
ST
LMC213A-SMST-R2
SC
LMC213A-SMSC-R2
MT-RJ
LMC213A-SMRJ
1550-nm,Single-Mode,85km
SC
LMC213A-SM-XLH-R2
1550-nm,Single-Mode,110km
SC
LMC213A-SM-SLH-R2
1300-nm,Single-ModePlus,58km
ST
LMC214A-STP-R2
SC
LMC214A-SCP-R2
Item Code
FlexPointMediaConverterModules(Continued)
GigabitUTPtoFiber
1000BASE-Tto1000BASE-SX(UTPtoFiber)
850-nm,Multimode,220m
MT-RJ
LMC1007A-R3
SC
LMC1003A-R3
1000BASE-Tto1000BASE-LX
1300-nm,Single-Mode,10km
SC
LMC1004A-R3
TokenRingUTP/Fiber
850-nm,Multimode,2.5km
LTM215A-MM
1300-nm,Single-Mode,20km
LTM215A-SM
100-MbpsFiber-to-FiberModeConverters
1300-nmMultimodeto1300-nmSingle-Mode,
5km–28km
STtoST
LMC250A-ST
SCtoSC
LMC250A
850-nmMultimodeto1300-nmSingle-Mode,
500m–28km
STtoST
LMC251A-ST
SCtoSC
LMC251A-SC
1300-nmMultimodeto100BASE-FX1300-nm
Single-Mode,5kmMultimodeto58kmSingle-Mode
STtoST
LMC250A-ST-LH
SCtoSC
LMC250A-LH
850-nmMultimodeto100BASE-FX(SX)1300-nm
Single-Mode,5kmMultimodeto58kmSingle-Mode
STtoST
LMC251A-ST-LH
SCtoST
LMC251A-SC-LH
1300-nmMultimodeto1300-nmMultimode,5kmto
5kmFullDuplex,412mto412mHalf-Duplex
STtoST
LMC253A-ST
SCtoSC
LMC253A-SC
850-nmMultimodeto1300-nmMultimode,5kmto
5kmFullDuplex,412mto412mHalf-Duplex
STtoST
LMC252A-ST
SCtoSC
LMC252A-SC
LMC206-WALL
724-746-5500 blackbox.com
BL A C K B O X
®
6 of 6
05/14/2010
#24868
Item Code
FlexPointMediaConverterModules(Continued)
1000-MbpsMultimodetoSingle-ModeFiber-to-Fiber
Mode Converters
850-nmMultimodeto1300-nmSingle-Mode,
220mMultimodeto5kmSingle-Mode
SCtoSC
LMC1001A
850-nmMultimodeto1300-nmSingle-Mode,
220mMultimodeto20kmSingle-Mode
SCtoSC
LMC1002A
850-nmMultimodeto1550-nmSingle-Mode,
220mMultimodeto50kmSingle-Mode
SCtoSC
LMC1000A
Fiber-to-FiberModeConvertersforATMOC-3
1300-nmMultimodeto1300-nmSingle-Mode,
5kmto28km
STtoST
LMC155A-ST
SCtoSC
LMC155A
850-nmMultimodeto1300-nmSingle-Mode,
5kmto28km
STtoST
LMC156A-ST
SCtoSC
LMC156A-SC
1300-nmMultimodeto1550-nmSingle-Mode,
5kmto85km
SCtoSC
LMC155A-XLH
1300-nmMultimodeto1300-nmSingle-Mode,
5kmto58km
STtoST
LMC155A-ST-LH
SCtoSC
LMC155A-LH
850-nmMultimodeto1300-nmSingle-Mode,
5kmto50km
STtoST
LMC156A-ST-LH
SCtoSC
LMC156A-SC-LH
Fiber-to-FiberModeConvertersforATMOC-12LX
1300-nmMultimodeto1300-nmSingleMode,
550mto20km
SCtoSC
LMC622A-LH
1300-nmMultimodeto1300-nmSingleMode,
550mto5km
SCtoSC
LMC622A
1300-nmMultimodeto1550-nmSingle-Mode,
550mto50km
SCtoSC
LMC622A-LLH
LMC100A-R2
Item Code
FlexPointMediaConverterModules(Continued)
10/100RateConverters
1300-nm,Multimode,2km
 ST
LMC100A-R2
SC
LMC100A-SC-R2
MT-RJ
LMC100A-RJ-R2
1300-nm,Single-Mode,28km
ST
LMC100A-SM-R2
SC
LMC100A-SMSC-R2
MT-RJ
LMC100A-SMRJ-R2
1300-nm,Single-Mode,58km
SC
LMC100A-SMSC-LH-R2
1550-nm,Single-Mode,85km
SC
LMC100A-SMSC-XLH-R2
1550-nm,Single-Mode,100km
SC
LMC100A-SMSC-SLH-R2
T1/E1CoppertoFiberLineDrivers
1310-nm,Multimode,5km
ST
MT660A-MM
1310-nm,Single-Mode,28km
ST
MT660A-SM
FlexPointAccessoriesandReplacementParts
PowerSupplyforPowerChassis
115–230VAC
PSFP200
48VDC
PSFP20-DC
DCPowerConverter,18-to-72VDC
Standalone
LMC204A
DCPowerConverter
WallmountingKit
LMC206A-WALL-DC
InternationalPowerSupplyforall
FlexPointModels(9V,1A)
LMC203A
To install the converter on DIN rails, order…
FlexPointDINRailMountingKit
LMC207-DRM
You may also need…
Category5Solid-ConductorCable,4-Pair,
Straight-Pinned,PVC
EYN556MS
DuplexFiberOpticCable,PVC,ST–ST
EFN110
Single-ModeDuplexFiberOpticCable,PVC,
ST–ST
EFN310
T1Cable,RJ-48/RJ-48,Straight-Pinned
ETNMSR01
LTM215A
MT660A-MM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Black Box LMC213A-MMSC-R2 Datasheet

LMC213A-MMSC-R2
Black Box
Brand
Black Box
Model
LMC213A-MMSC-R2
Category
Network media converters
Type
Datasheet
This manual is also suitable for

The Black Box LMC213A-MMSC-R2 is a media converter that enables the connection of 100BASE-FX multimode fiber to 100BASE-TX copper. It supports auto-negotiation for full- and half-duplex operation on the copper port, and features a DIP switch for manual speed and duplex selection. The fiber port operates at 1300nm wavelength and uses a SC connector. The converter supports distances of up to 2km (1.2 miles) on multimode fiber.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents